1990-1993 Mustang Maximum Motorsports Caster Camber Plates - Black

1990, 1991, 1992, 1993 Mustang

Maximum Motorsports Caster Camber Plates (Black)

Maximum Motorsports 1990-93 Mustang Caster Camber Plates, black powdercoat finish. Provides independent adjustment of camber and caster.

Benefits

• Aids proper front alignment, improves performance.
• Lowered Mustangs can be aligned to factory specifications.
• Provides a wider range of camber adjustment than is otherwise possible.
• Negative camber may be increased for competition.
• Provides caster adjustment (otherwise not adjustable).
• Allows greatly increasing caster for improved straight-line stability and cornering ability.
• Suitable for coil-over conversion.
• Allows increasing bump travel.
• Caster and camber are easily adjusted at the top of the strut tower.
• Double-adjustable. Camber is adjustable without affecting caster.
• Spherical bearing mount eliminates deflection and precisely locates the strut shaft, while still allowing the articulation required for steering and suspension movement.
• Improves steering response and dynamic alignment stability, by eliminating deflection allowed by the stock rubber-bushed upper strut mount.
• Bolts on. No drilling or cutting required.

Product features

• Separate and independent adjustment for camber and caster.
• Widest possible range of camber adjustment, twice the range of the stock upper strut mount. Strut shaft can be moved from one side of the strut tower's center hole to the other side.
• Widest possible continuous range of caster adjustment, limited not by the plate, but by the strut shaft contacting the rear edge of the strut tower's center hole.
• Teflon lined spherical bearing is custom designed to MM specifications, and manufactured in the USA. Allows proper articulation, unlike urethane-bushed camber plates.
• Main plate is high alloy steel, stronger than mild steel, with a much greater fatigue life than aluminum.
• Includes progressive bumpstops (in non-Bilstein/MM strut applications).
• Retains stock strut dustcovers (in non-Bilstein/MM strut applications).
• All parts are either zinc plated or powder coated for great looks and long lasting protection.
• Designed and manufactured in the USA by Maximum Motorsports.
• Warranty: Maximum Motorsports Caster Camber Plates part #MMCC9093 have a limited lifetime warranty against spherical bearing failure or plate failure. That's right; if the spherical bearing is damaged, or the plates break while driving, we will replace that component for free. This warranty applies only to the original retail purchaser of genuine Maximum Motorsports (MM) Caster Camber Plates.

Why do I need camber plates?

• Lowering your Mustang will cause the top of the front tires to "lean in" towards the center of the car (increased negative camber), resulting in rapid and/or uneven tire wear.
• This excessive negative camber can be easily corrected with the Maximum Motorsports Caster Camber Plates, allowing alignment to factory specifications.
• MM Caster Camber plates provide the means to adjust the front alignment for improved performance.