 |
click image(s) to enlarge |
|
|
|
|
|
- 2007-08 Roush Nitemare F-150 Pickup Trucks. We currently have 5 different systems to choose from:
- produce up to 6 lbs. of additional boost* with the 2.80" DUB SC Pulley System
- produce up to 5 lbs. of additional boost* with the 2.93" DUB SC Pulley System
- produce up to 3 lbs. of additional boost* with the 3.10" DUB SC Pulley System
- produce up to 2 lbs. of additional boost* with the 3.20" DUB SC Pulley System
- produce the same stock boost* with the 3.40" DUB SC Pulley System
- under WOT, verses the stock 3.40" supercharger pulley.
- NOTE: The 2.80" and 2.93" systems require the use of a Performance Chip to obtain maximum performance at these higher boost levels.
- NOTE: We highly recommend getting the Air/Fuel Ratio checked when using the smaller 3.10" and 3.20" DUB Pulley Systems.
- This Supercharger Pulley System consists of a High Quality 6061-T6 Aircraft Aluminum Anodized SC Pulley and Nitride Coated SC Steel Hub Assembly. This unit is "The Absolute Replacement" for all press-on aftermarket supercharger pulleys and SC snout units!
- Once the Dial_Ur_Boost unit is installed onto your SC snout shaft, you can easily from then on, change your SC pulleys in less than 10 minutes, start to finish!
- Using the ASP Pulley Puller Tool, which you can buy from us (see below), you will remove your stock press-on SC pulley. Once off, then simply press on our New SC Pulley Steel Hub Assembly with the Pulley Puller Tool. You will then be able to simply slip the new DUB Pulley onto the Hub Assembly and attach the 4 Allen head bolts to secure your New SC Pulley!
- NOTE: This DUB Pulley Unit will also work on the FOOSE F150 SC Truck, Roush 500SC Truck, as the supercharger unit configuration is the same for all 3 Trucks.
|
|
