1994-2004 Mustang GT Wilwood Superlite 6R/CPB 14"/13" Brake Package 140-9117-10158

Comprehensive Brake Kit

Wilwood Engineering combines their massive six piston front brake kits with their combination rear brakes to create a complete performance brake system to completely overhaul your Mustang's factory setup to take on the toughest challenges found on the street or track.

Classic Wilwood Design

Wilwood has over 30 years of experience in designing brake systems for performance enthusiasts, and their complete Superlite brake kit exemplifies their dedication. These brakes are designed as replacement components for 1994 to 2004 GT Mustangs, SVT Cobras, Bullitts and Mach 1 Mustangs.

Customized Rotors

The two front brakes included with this kit are based around 14" rotors that can come either slotted or drilled and slotted, the options for both being available from our drop-down menu. Each rotor comes standard with a black electro-coating to optimize corrosion resistance. The specialized drilling patterns and vane designs reduce heat buildup while the slots aid in expelling pad gasses for minimized fade under heavy use. Wilwood's rotors have a 1.25" width, giving them just enough surface area to make full contact with the pads and pistons keep their overall weights low.

Powerful Calipers

Wilwood's calipers are machined from billet aluminum and contain six stainless steel pistons with over four squared inches of surface area. Each radially-mounted caliper has a closed-bridge design with five bolts that provide the structural strength needed to stand up to the toughest road and track conditions. Wilwood's calipers come in a choice of red or black powder coating that is available from our drop-down menu.

These front brakes require at least an 18-inch wheel.

Package Summary:

Front:
Spindle Type:	Disc
Mount Type:	Radial
Caliper Type:	6 Piston; Red or Black Powder Coat
Rotor Diameter:	14 Inch
Min. Wheel Diameter:	18 Inch
Rear:
Rear End Axle:	8.8 Ford 94-up
Axle Offset:	3.25
Mount Type:	Radial
Caliper Type:	1 Piston; Red or Black Powder Coat
Rotor Diameter:	12.88 Inch
Min. Wheel Diameter:	17 Inch

Lightweight Efficiency

The rear brakes feature 13 inch rotors that utilize the same design principles as the front with lighter, more efficient construction than stock blanks that also more adequately vent heat and brake gasses over stock blanks.

Dual-Function Rear Brakes

The real story behind the real brakes is Wilwood's unique caliper design. Each caliper is actually a dual-purpose parking and standard braking protocols integrated into a single system. The rear caliper uses a mechanical parking brake along with standard hydraulic braking mechanisms for normal operation. The radial-mounted caliper constantly maintains a perfect position over the rotor to ensure accurate braking at all times. The calipers come in a choice of black or red powder coats from our drop-down menu.

Available Options:

Part #	Calipers	Rotors	Brake Line Kits
WIL-140-9117-10158DR	Red	Drilled, Slotted	Front: WIL-220-6458; Rear: WIL-220-12201 or WIL-220-12202
WIL-140-9117-10158R	Red	Slotted Only (-$200)	Front: WIL-220-6458; Rear: WIL-220-12201 or WIL-220-12202
WIL-140-9117-10158D	Black	Drilled, Slotted (-$140)	Front: WIL-220-6458; Rear: WIL-220-12201 or WIL-220-12202
WIL-140-9117-10158	Black	Slotted Only (-$340)	Front: WIL-220-6458; Rear: WIL-220-12201

Brake Testing:

Wilwood strongly recommends following their brake testing procedures to ensure optimum braking performance.

Brake Lines and Parking Brake Cable: the front and rear calipers of this kit will require Wilwood's Flexline Brake Lines, while the rear CPB calipers will require a Wilwood parking brake cable kit, unless sourced elsewhere or you're willing to make heavy modifications to your factory brake lines or brake cable. Please select your brake line and parking brake options from the drop-down menu above. Call 623-434-5277 for more information.