2002-2003 Ford F250 & F350 7.3L Automatic Transmisson Edge Revolver CTS3 Performance Kit | Part# 14108-3

2002-2003 F250 & F350 7.3L Edge Revolver CTS3 Performance Kit Features:

• Shift-on-the-fly power levels with the Insight CTS3
• Vehicle Specific Calibrations
• Revolver chips are loaded with standard or custom tunes
• Includes LED Module With Easy To Read Display
• Easy installation

Upgrade Your Truck's Performance With Specific Calibrated Tunes

Add a serious performance upgrade to your 2002-2003 F250 & F350 7.3L with this Edge Revolver CTS3 Performance Kit. Utilizing the touchscreen on the Insight CTS3 you can change the power levels of your chip on an easy to see and use product. The chip itself offers adjustable performance that helps to provide up to 140 horsepower and 250 lb-ft of torque. This system offers calibrations that is extremely vehicle specific. Be sure to check out the list below so you are getting the exact one that you need for your truck. Edge includes up to six options for performance and other various modes. The chips are loaded with standard or custom tunes and offers extremely easy installation so you can get going faster. It is integral that the performance chip itself works with your specific 7.3L box code. The list directly below this paragraph lays out all of the possible tune chip levels that you can choose from with this kit.

Edge Revolver Chip Tune Levels:

• Level 1: Stock Tune
• Level 2: High Idle
• Level 3: 50 Horsepower & 100 lb-ft
• Level 4: 75 Horsepower & 150 lb-ft
• Level 5: 100 Horsepower & 200 lb-ft
• Level 6: 140 Horsepower & 250 lb-ft

Finding Your ECU Code To Ensure Proper Fitment

As previously mentioned the fitment for this product is very specific. So prior to buying you will need some info from your Super Duty. The first thing you need to find is the ECU code. Your ECU is located behind the driver's side kick panel where there is a plug that will have a sticker on the plug that shows you the ECU plug. If that sticker is not there, then you can take a look in the engine compartment where the main harness connects directly to the ECU. Sometimes you can actually put your smart phone or some sort of camera down near it to snap a picture of the code. If after all that you still can't find it, then you may need to remove the ECU. There will be a large 4 digit code there that are three letters and one number. Beneath this paragraph is a basic overview about how to install this chip. The product itself includes more specific instructions so here is a basic overview.

Overview Of Chip Installation Process:

1. Make sure you do not have your truck?s key in the ignition
2. Find your ECU in your truck
3. Open the ?J? port which is on the side of your ECM
4. Use the included Scrubby pad/alcohol wipe to clean any goo or dust off the port (Make it REALLY clean)
5. Hook your chip?s switch up to the chip itself
6. Insert the chip over the exposed electronics port
7. Run the switch wire off to the side
8. Cover the port with the 4?4 sticker to make sure the ECM does not get additional dust in it
9. Run your switch to the desired location and mount it
10. Enjoy your performance tunes!

Fitment:

• 2002, 2003 F250 & F350 Super Duty 7.3L Powerstroke
• Automatic Transmissions With Master Box Code VDH4 ONLY
• Will work with one of the following ECU Codes:BXE KEK NWM PBY PRW TMA VDH VDU QLJ