2011-2016 Ford F250 & F350 6.7L 4WD BDS 8 inch Coilover 4-Link Lift (DSC) | 1500FDSC

Highlights:

• Designed to Drastically Improve Off-Road Performance
• Clear up to 38" Off-Road Tires
• Heavy-Duty Five-Leaf Rear Spring Pack
• Highly Versatile System
• Includes Fox 2.5 Factory Series Remote Coilovers
• DSC Adjuster Technology

Improved Performance and Makes Room for 38" Tires

If you're going for a towering stance for your 6.7L Super Duty build, you can never go wrong with a kit from BDS Suspension - especially when it's this performance-oriented Coilover Conversion 4-Link Suspension Kit. This kit comes with four heavy duty control arms as well as new four-link frame mounting brackets to replace your stock mounting system. The full replacement 4-link frame brackets bolt into factory holes and create a solid mounting location for the massive tubular 4-link arms. This high-performance lift kit utilizes powdercoated control arms to optimize front suspension geometry for control and handling through the most rugged off-road terrain as well as highways and roads. The front portion of the lift system also includes a forged drop pitman arm and front track bar relocation bracket to correct steering and track bar angles as well as to center the axle under the vehicle. Front bump stop extensions, sway bar drops, and brake line relocation brackets round out the front of this system, while full replacement BDS Glideride leaf springs level the rear with the front. The heavy-duty leaf springs springs utilize a five-leaf design with a built-in overload leaf to assist with heavy loads.

Includes High-Performance Fox 2.5 Factory Series Remote Coilovers

This all-terrain 4-Link Coilover System provides your F250 or F350 an 8" lifted platform to allow for 38" tires and fine-tunes your suspension system for maximum control no matter the terrain. The increased stability in the steering wheel is noticeable under normal driving conditions on streets and highways as well as on bumpy and uneven off-road trails. The links are made from high-quality and extremely thick steel that's expertly welded together in BDS' Michigan facilities. This kit centers around a pair of Fox Factory Series 8" travel coilovers that allow for easy compression adjustment and performance geared toward any application. The coilovers are paired with black anodized machined 6061-T6 billet aluminum mounts. Rounding out this awesome kit is a set of front and rear Fox 2.0 Series shocks for unparalleled on and off-road performance. Each shock comes equipped with FOX's DSC Adjuster Technology that allows you to fine tune the compression and rebound of the shocks, giving you a serious improvement in both on and off-road capabilities.

Fitment Notes:

• Exhaust modification may be required to clear front driveshaft (gas only).
• Front bumper spacer kit may be required to run 38"x15.50" tires.
• If equipped with two-piece rear driveshaft, you'll need the Carrier Bearing Drop.
• Front driveshaft u-joints may max out at full droop. If so, a new front shaft will be required.
• U-bolts will not work on dually.
• Front auxiliary shocks can be omitted from kit - system can be used with C/O installed alone.