2015-2020 Ford F150 4WD BDS 6 inch Suspension Lift Kit with Fox Snap Ring Struts & 2.0 Rear Shocks | 1532FSR

15-20 F150 BDS 6" Fox Snap Ring Lift Kit Features:

• Heavy-duty and high-performance BDS lift kit
• Clears up to 37" Tires
• Comes with full-length Fox 2.0 Snap Ring Struts
• Won't Interfere With Stability or Traction Control Systems
• Includes CNC-Machined Lifted Steering Knuckles
• Features Fox 2.0 rear shocks for improved performance
• Won't fit 3.0L Powerstrokes models

Durable, Tough F150 Lift Kit From BDS Suspension

When it comes to sheer strength and quality in the world of 2015-2020 F150 suspension lift kits, no one manages to hit the mark like our friends over at BDS Suspension. The BDS complete 6" Fox Snap Ring Lift Kit for the 2015-2020 F150s gives your truck a towering ride height, the ability to fit on up to 37" tires, and unprecedented strength to hold up to just about any application, terrain, and climate. The BDS F150 6" Lift Kit is backed by BDS' insane "No Fine Print" warranty that will replace any part of the lift kit if there is a failure. These 6" suspension lift kits are even FMVSS-126 compliant and won't interfere or impede your truck's traction control or stability control systems even after installation. The kit comes with everything you need for installation for the ultimate off-road capability. This version of BDS's lift kit comes with full-length Fox 2.0 Snap Ring strut assemblies, as well as Fox 2.0 rear shocks so that your F150 gets an excellent ride and handling performance, even at its new ride height.

Includes Fox 2.0 Snap Ring Strut Assemblies with Crossmembers and Drop Brackets

The 2015-2020 F150 6" lift kit from BDS includes a complete set of front-end lift kit hardware that brings up your front ride height while correcting your suspension and drivetrain hardware for a proper ride and performance. Each of these kits provides its extra ride height by using a pair of Fox 2.0 Snap Ring Strut Assemblies with a full-length, 6" lifted height and accept your factory spring and upper mounts. The Fox 2.0 Snap Ring assemblies provide a clean, stable ride and have just enough off-road performance to handle forest roads and trails. The lift kit comes with a pair of CNC machined, ductile iron steering knuckles with lifted spindles that correct your truck's upper control arm angles while helping to adjust your CV axle angles. The kit also comes with front and rear crossmembers, as well as differential drop brackets that relocate your truck's lower control arms and CV axles to a proper position. The crossmembers are bridged by a skid plate which helps keep your differential protected from damage. The crossmembers, skid plate, and drop brackets are each made out of 1/4" thick steel that's then powder coated to help resist corrosion.

Includes 5" Rear Block and Set of Fox 2.0 Rear Shocls

To lift the rear of your truck, BDS includes a new rear block, U-bolts, and nuts that are paired up with longer rear shocks to keep everything running perfectly. BDS' rear blocks completely replace the factory rear blocks and feature an offset pin design that helps to recenter the axle after the lift for improved drivability and wheel and tire fitment. The BDS 5" rear blocks preserve some of your F150's front rake so that you don't end up nose-high when towing or hauling heavy loads. The kit comes standard with a pair of Fox 2.0 rear shocks that provide vastly improved handling and off-road capability than the stock shocks thanks to their gas-charged monotube internal design and all-aluminum bodies. Each of these kits also includes a new driveshaft spacer, installation instructions, and all of the hardware that you'll need for installation.

Carrier Bearing Bracket: F150s with a two-piece driveshaft will require BDS's Carrier Bearing Drop Bracket here.

Wheel Fitment: This BDS lift kit is not compatible with stock 17" or 18" wheels and will require at least an 18x9" wheel with a maximum of 5.50" to 5" of backspace for proper fitment. Factory 20" FX4 or Platinum wheels can be used, but will be limited to a 305/60R20 tire.

Some cutting required: this kit requires some cutting of your truck's subframe for installation.

Will not fit 2018, 2019, 2020 F150 3.0L Powerstrokes: this lift kit will not fit 2018, 2019, 2020 F150s with a 3.0L Powerstroke diesel due to clearance issues with the rear crossmember. Please call us directly at 623-434-5277 for other lift kit options.