2015-2020 F150 4WD BDS 4" Fox 2.5 DSC Coilover Suspension Lift Kit 1533FDSC

F150 BDS Fox Coilover Lift Kit Features:

• Provides a huge lift and awesome suspension performance
• Features Fox 2.5 DSC front coilovers and Fox 2.0 rear shocks
• Provides clearance for up to 35x12.50" tires (with compatible wheel)
• Heavy-duty crossmembers, knuckles, and installation hardware
• 4" rear blocks with U-bolts and nuts
• 2.5 coilovers feature compression adjustment for fine-tuning
• Comes with all necessary components, hardware, and instructions
• Backed by BDS's Lifetime Warranty
• Requires subframe cutting and drilling for installation

Adds a Wicked Stance and Greatly Improves Your F150's Suspension Performance

There's hardly anything on the planet tougher than a BDS Lift Kit, and when you combine BDS's legendary durability with the raw off-road performance of Fox 2.5 Reservoir coilovers and 2.0 rear shocks, you get a combination that's practically unstoppable. Meet the BDS 4" Lift Kit with Fox 2.5 Reservoir Coilovers for the 2015-2020 F150s with 4WD. This powerful, complete suspension lift kit is the last word in suspension lift systems, and features extremely strong and durable lift hardware that can handle just about any terrain or application that you can throw at it. The lift components are combined with a pair of Fox 2.5 Remote Reservoir full-length coilovers for the front of the system and a pair of Fox 2.0 rear shocks long enough to handle the increased lift. The Fox dampers offer up extremely impressive off-road performance with greatly reduced fade over the factory shocks and struts to help your aggressive F150 conquer just about any terrain on the planet. The kit gives your F150 an impressive stance and allows you to fit 35x12.50" tires without trimming on 18x9" wheels with 5" of backspace.

Includes Full-Length Fox 2.5 Coilovers with Remote Reservoirs

BDS's lift kit hardware is designed for a perfect fit on your 2015-2020 F150, while being extremely strong and durable. Each one of BDS's 4" lift kits is built around a pair of front and rear crossmembers that are manufactured out of laser-cut, 1/4" thick steel and are each boxed and gusseted for extreme levels of strength. Every kit also includes a pair of ductile cast iron knuckles with lifted spindles that keep your F150's upper control arms near OEM angles and specs. The kit comes standard with a pair of differential drop brackets to correct your F150's CV angles, as well as a differential skid plate that installs between the two crossmembers to keep your front diff protected. The actual 4" of lift is provided by the Fox 2.5 DSC Remote Reservoir Coilovers which were specifically designed for use with BDS's 4" lift kit. The coilovers are built around a 2.5" shock body and stretch all the way from your F150's LCA to its strut mount, completely avoiding the need for spacers. The coilovers offer a huge reduction in fade over stock thanks to the combination of their remote reservoirs, larger internal oil capacity, and their aluminum designs. The coilovers are pre-set at 4" of lift out of the box, allowing them to drop right in with the rest of your components. The remote reservoirs are fitted with Fox's Dual Speed Compression (DSC) adjusters that allow you to fine-tune your F150's ride both on and off-road.

Features Powerful Fox 2.0 Rear Shocks and your Choice of Rear Block

The rear lift components combine your choice of a BDS rear block with new U-bolts and awesome Fox 2.0 shocks to give your truck the extra lift you want along with the damping performance you need to take your truck just about anywhere. The kit comes with a 4" rear block, which keeps some rake while increasing ride height over stock. Your choice of rear block comes standard with a new set of U-bolts and nuts that holds them firmly in place, even if your 2015-2020 F150 is running extra power from bolt-ons or tuning. The kit is rounded out by BDS's Fox 2.0 rear shocks, which were specifically designed by Fox for use with this kit. Each shock is 2" in diameter is has an aluminum body and large internal oil reservoir that greatly reduces heat buildup and fade over the factory shocks. The Fox 2.0s each have specialized valving that improves response and increases travel to help your rear suspension flex and absorb bumps much better than the factory shocks. BDS also provides an optional E-brake relocation bracket, which is required if your truck has factory power steps installed.

Carrier Bearing Drop Bracket: F150s with a two-piece driveshaft will require the optional Carrier Bearing Drop Bracket from our drop-down menu above.

E-Brake Relocation Bracket: The optional E-Brake relocation bracket will be required on F150s with factory-optional power steps. Please select your choice from our drop-down menu above.

Wheel Fitment: This kit is not compatible with factory 17" or 18" wheels, and 18x9" wheels with at most 5.50" to 5" of backspace will be required to clear a 12.50" wide tire. Factory 20" FX4 or Platinum wheels can be used with this system, however, they will be extremely limited in regards to tire size.

Some cutting required: this kit requires some cutting of your truck's subframe for installation, but no longer requires welding due to a design change made by BDS

Carrier Bearing Bracket: F150s with a two-piece driveshaft will require BDS's carrier bearing drop bracket here.