2015-2020 Ford F150 4WD BDS 4 inch Suspension Lift Kit with Fox 2.0 Rear Shocks | 1533FS

2015-2020 F150 4WD BDS 4 inch FOX 2.0 Lift Kit - 2015-2020 F150 4WD BDS 4 inch FOX 2.0 Lift Kit
2015-2020 F150 4WD BDS 4 inch FOX 2.0 Lift Kit
SKU 1533FS
2 Review(s)
$2,343.60
0 in stock Ships From Manufacturer in 3-5 Days
Free shipping included
60-day returns on most items
Earn reward points with this purchase
Write a Review
Average Rating
2015 F150 Lariat
Bought this lift kit about a month ago and installed it on my 2015 F150 lariat. If you have the Auto 4WD you need this kit, not the 2015-2016. Anyways, the kit is awesome. The parts are high quality and everything arrived quickly. I upgraded to the rear Fox 2.0 shocks and up front used Bilstein 5100s with the spacers included with the lift. I set the Bilsteins @ 1.25" of lift and the truck is dead level. The ride is nice and I get compliments daily! It is a great kit, and the guys at Stage 3 are great to deal with. I called them up and spoke to Lou McBee who was a pleasure to deal with! Will be buying from these guys again!
Did you find this helpful?  15 of 15  Found Helpful
Reviewed by:  from Miami, FL on 9/1/2019
5
Average Rating
2018 F150
Stage3 representative was awesome. Shipping was fast. BDS lift was installed with Bilstein 5100 on the front and Fox 2.0 on the rear. I installed the Bilstein at stock height and netted exactly 4” on the front and 2.75 on the rear. Tires are 295/60R20 (34x11.5) Truck has a 3.55 rear end. Truck drives almost exactly like OEM with just the slightest change in firmness of ride. I imagine this can be attributed more to the change in tires than the lift. ( I went from a P rated to a 10 ply LT tire.)
Did you find this helpful?  10 of 10  Found Helpful
Reviewed by:  from TX on 10/14/2019
5
Load More

Customer Question Does this kit come with the shims for the carrier bearing if you have a long bed truck?

Asked by: Noah - 10/5/2021
Was this answer helpful?  0 of 0  Found Helpful.
Answer provided by: Jason@Stage3 (10/7/2021)

Customer Question I’m interested in this lift kit along with 35x12.5 tires… what set of wheel ma would fit this lift and desired tires?

Asked by: Andres - 10/3/2021
Customer Answer Any 18" or larger wheel with a maximum backspace of 5.50" will allow a 12.50" wide tire to fit with this lift kit. There are a TON of wheels that fit that mark. Your best bet would be to give us a call directly at 623-434-5277 or email us at [email protected] so we can get more specific about the wheels you'd prefer.
Was this answer helpful?  0 of 0  Found Helpful.
Answer provided by: Jason@Stage3 (10/5/2021)

Customer Question 2018 f150 stx 4x4 supercrew. Would 35x12.5 tires on 20x10 -25 offset 4.52 backspacing wheel and tire work with this bds lift I'm not sure about the backspacing and tire width??

Asked by: Kole - 1/6/2021
Customer Answer You'll clear the kit's knuckles with that wheel and tire combination just fine.
Was this answer helpful?  0 of 0  Found Helpful.
Answer provided by: Jason@Stage3 (1/7/2021)

Customer Question Does this kit require to trim or remove the front crash bars? hoping to fit a 35x20x11.5 with a 12 offset and 5.50 backspacing. may throw in a wheel spacer to help offset.

Asked by: SteveR - 10/24/2020
Customer Answer This kit does not require removing the crash bars on its own. A set or 35x11.50R20 tires should not require trimming the crash bars.
Was this answer helpful?  0 of 0  Found Helpful.
Answer provided by: Jason@Stage3 (10/26/2020)

Customer Question I want to get this kit with the Fox Coilover DSC however currently on a budget. Would I be able to buy and install this kit then install the FOX 2.5 DSC Coilovers for 4" inch lifts down the road? Also the intention is to build an Overland build would this kit work well for moderate off road trails (or would I need to get those Fox coilovers asap?)

Asked by: Rahman - 7/14/2020
Customer Answer Yep. There's no reason why you couldn't get the DSC's down the road and install them at a later date. The base kit is adequate for light to moderate off-road applications. The NX2 rear shocks are pretty decent. Your only real weakness is the stock coilover assembly, though even that will survive some amount of off-roading. You'll just get jarred around a bit out in the dirt.
Was this answer helpful?  2 of 2  Found Helpful.
Answer provided by: Jason@Stage3 (7/15/2020)

Customer Question should i be able to squeeze a method 17x8.5 0 offset 4.75 backspace on this lift? i really dont want to go with a 18 but want a 4 inch lift

Asked by: Jason Opel - 7/13/2020
Customer Answer Unfortunately, BDS cannot guarantee the fitment of any 17" wheel with this kit, and we haven't tried any personally ourselves.
Was this answer helpful?  0 of 0  Found Helpful.
Answer provided by: Jason@Stage3 (7/14/2020)

Customer Question 2018 F150 supercab. I see the the max tire size on the stock 20's is 305/60-20. Will a 33x12.50/20 fit without rubbing the coil as its not as high? Assuming its tire to coil spring clearance issues.

Asked by: Chris - 7/17/2019
Customer Answer A 12.50" wide tire will not fit on the factory wheels. Tire height is not the issue, solely width. The problem is that stock wheels have too much backspacing for a 12.50" wide tire to clear the kit's larger steering knuckles For stock wheels, you'd need to use a narrower tire, though you could stay in the 35" tall range.
Was this answer helpful?  3 of 3  Found Helpful.
Answer provided by: Jason@Stage3 (7/17/2019)

Customer Question What’s the difference between this years lift vs 2015- 2016 bds lift?

Asked by: Marc - 7/16/2019
Customer Answer There were minor changes in the mounting and positioning of the front IFS axle and the transfer case that resulted in BDS needing to make a couple of changes due to how their crossmembers tuck against the frame.
Was this answer helpful?  0 of 0  Found Helpful.
Answer provided by: Jason@Stage3 (7/17/2019)

Customer Question Will my fox 2.0 Coilovers work well with this BDS 4” suspension lift?

Asked by: Mike Jones - 4/14/2019
Customer Answer As long as you reuse the strut spacers that are included with this kit. We do recommend setting the coilovers to a 0" stock ride height before you install them with a lift kit.
Was this answer helpful?  2 of 2  Found Helpful.
Answer provided by: Jason@Stage3 (4/15/2019)

Customer Question Can I run a 35x12.5r17 with a 17x8.5 0 offset?

Asked by: Jr - 12/17/2018
Customer Answer This lift kit is not guaranteed to fit a 17" wheel at all, regardless of offset and backspacing. Please call us directly at 623-434-5277 for other possible options.
Was this answer helpful?  0 of 0  Found Helpful.
Answer provided by: Jason@Stage3 (12/18/2018)

Customer Question I bought this kit with the Fox shocks. After installing the kit on my truck. I wasn’t to hype about the look. So my question is, what do I need to bring it up to 6inchs? Thank you.

Asked by: Eduardo Pena - 5/22/2018
Customer Answer To get extra front lift, you'd either need to grab an adjustable stock-replacement coilover, a full-length coilover for 6" lift kits, or a 6" lift strut spacer to drop into place of your truck's current strut spacers. For the rear, you'd either need a larger rear block or an add-a-leaf kit depending on what kind of stance you're looking for.
Was this answer helpful?  1 of 1  Found Helpful.
Answer provided by: Jason@Stage3 (5/23/2018)

Customer Question Would you be able to use this kit with Bilstein 5100s in the front in place of the strut spacers and in the back in place of the BDS shock absorbers?

Asked by: Murph - 1/23/2018
Customer Answer You would not. The Bilstein 5100s are not long enough to work in a standalone application with either the front or the rear of this lift kit. For the rear, you would need either the Fox 2.0 Rear shock for 4" Lifts, or the Bilstein 5125 Rear Shock for 4" Lifts. Your only real option for the front is the BDS Fox 2.5 Coilover Kit for 4" Lifts.
Was this answer helpful?  1 of 1  Found Helpful.
Answer provided by: Jason@Stage3 (1/24/2018)

Customer Question The description talks about wheel specs for 18" rims. Would this kit work with 20x9 wheels (20mm offset) with 35x12.5 tires? thanks

Asked by: Seth - 12/6/2017
Customer Answer This kit requires a minimum of an 18" wheel to clear the knuckles, so a 20x9" wheel would work. However, you will not be able to fit a 20x9" wheel with a +20mm offset with a 12.50" wide tire on this kit. This kit requires a maximum backspacing 5.50" to clear a 12.50" wide tire. Since a +20mm offset on a 9" wide wheel puts you at 5.8" of backspace, the maximum tire you should use is a 305 wide (12" wide). You would need a 20x9" wheel with a maximum offset of +12mm to clear a 12.50" wide tire.
Was this answer helpful?  2 of 2  Found Helpful.
Answer provided by: Jason@Stage3 (12/7/2017)

Customer Question 2017 F140 Super Crew 4x4. Does this kit make the truck sit dead level or still higher in the rear?

Asked by: Scott - 11/22/2017
Customer Answer This particular kit tends to leave a smidge of rake, though not very much.
Was this answer helpful?  2 of 2  Found Helpful.
Answer provided by: Jason@Stage3 (11/24/2017)
Load More
Earn reward points
on this product

Stage 3 Rewards is our free customer loyalty program. Earn points on every order and redeem for cash off your next purchase.

  • 100 bonus points just for signing up ($2 to start)
  • 1 point per dollar spent on every order (2% back)
  • Bonus points for reviews, birthdays, and social shares
  • Redeem for $10, $20, $30, $50, or $100 off coupons
See full program details

WARNING: Cancer and Reproductive Harm

This product can expose you to chemicals including those known to the State of California to cause cancer and birth defects or other reproductive harm.

For more information, visit [www.p65warnings.ca.gov](https://www.p65warnings.ca.gov).

Pick Up Where You Left Off

Logo