2017-2019 Ford F250 & F350 3-Leaf 6.7L 4WD BDS 4 inch 4-Link Coil-Over Suspension Lift Kit (FOX DSC) | 1538FDSC

Highlights:

• Clear up to 37" Tires
• Vastly Improved Off-Road Performance
• Heavy-Duty 4-Link Control Arms
• Featuring Fox 2.5 Coilovers
• DSC Adjuster Technology
• Backed by BDS' Lifetime Warranty

High-End Coilover Conversion Suspension System

If you're going for a well-rounded and comprehensive 4" lift for your 6.7L diesel Super Duty, BDS Suspension's Coilover Suspension Lift is one of the best options out there. This impressive lift kit offers customization options to meet your needs and each component is built so durably that the kit comes with a "No BS" Limited Lifetime Warranty. If you're looking for a great lift that will allow you to throw on a set of rugged 37" off-road tires and custom wheels, BDS' 4" Coilover Suspension Lift Kit is for you. The real star of the show here are Fox's 2.5 Remote Coilovers, which provide your Super Duty the ultimate in off-road capability and ride handling. The coilovers mount using a pair of upper and lower brackets the key off the factory coil buckets and axle mount for easy installation. Along with high-end Fox coilovers, this awesome lift comes with a complete set of front and rear Fox 2.5 IFP performance gas shocks to round out your high-end, off-road ready suspension setup. Each coilover also comes equipped with FOX's DSC Adjuster Technology that allows you to fine tune the compression and rebound of the shocks for the ultimate ride both on and off-road.

Features Heavy-Duty 4-Link System

The BDS 4" lift kit uses a 4-Link System to provide your F250 or F350 with maximum control in the steering wheel over rough terrain. The stability in the steering wheel is even noticeable under normal driving conditions on streets and highways. The links are made from high-quality and extremely thick steel that's expertly welded together to provide maximum suspension support. The 4-link brackets are built from 1/4" steel and key off the factory frame bracket and transmission crossmember for extra strength while improving stability and caster control during wheel travel. Further improving stability is a single BDS NX2 Series stabilizer. The kit also comes with front anti-sway bar drop brackets, a dropped pitman arm for steering angle correction, a track bar relocation bracket to properly center your axle, brake line relocation brackets, and bump stop extensions.

Fitment: 2017-2019 F250/F350 4WD Diesel Only (3-Leaf Main Pack Trucks Only)

Wheel & Tire Fitment:

• 37 x 12.50 w/17 x 9 and 4.5" - 5" back spacing
• 37 x 12.50 w/18 x 9 and 4.5" - 5" back spacing
• 37 x 12.50 w/20 x 9 and 4.5" - 5" back spacing

Fitment Notes:

• Removal of the factory leaf spring block is required for installation.
• Net rear lift will vary depending on height of factory block, but will result in a level stance.
• If equipped with a 2-piece rear driveshaft, a Carrier Bearing Drop Kit will need to be added to your order for proper fitment.
• If your truck is equipped with a factory rear sway bar, you'll need to add the BDS Rear Anti-Sway Bar Link Kit to your order.