2020-2022 Ford F250/F350 4WD 6.7L BDS 5 inch Radius Arm Lift Kit w/ FOX 2.5 Elite Coilovers & 2.0 Shocks | 1551FPE

F250/F350 4WD 6.7L BDS 5 inch Radius Arm Lift Kit Features:

• FOX 2.5 Elite front coilovers with DSC
• FOX 2.0 rear shocks for balanced control
• Heavy-duty tubular radius arms with caster
• 37” tire clearance for aggressive stance
• Forged drop pitman arm for steering correction
• Track bar bracket recenters front axle
• Fabricated lift blocks maintain rear ride height
• Coilovers mount in factory coil bucket
• Remote reservoirs keep shocks running cool
• DSC adjusters fine-tune compression settings
• Eibach springs smooth out rough terrain
• Direct bolt-on design, no cutting required

Built for Serious Drivers Who Demand Only the Best

If you're running a 2020-2022 Super Duty 6.7L and you're ready to upgrade more than just looks, the BDS 5-inch Radius Arm Lift Kit with FOX 2.5 Elite Coilovers and FOX 2.0 rear shocks is the kind of system that transforms the way your truck handles the road and the trail. This kit isn't for the casual cruiser. It's made for owners who haul, tow, explore rough country, or just want more control and capability from their truck. With clearance for up to 37-inch tires, it instantly gives your F-250 or F-350 a more aggressive stance while adding the kind of travel and articulation you need when terrain gets unpredictable. Whether you're towing a trailer through the mountains or hitting uneven jobsite access roads, you'll feel the difference behind the wheel.

Next-Level Control with FOX Coilovers and Shocks

At the heart of this kit are the diesel-tuned FOX 2.5 Performance Elite coilovers up front and FOX 2.0 Performance shocks in the rear. The coilovers replace your factory coils and drop directly into the stock buckets, making for a clean and strong install that’s ready to work. They include external reservoirs to handle heat better and stay consistent on long hauls or back-to-back hits off-road. The real magic is in the DSC adjusters, which let you fine-tune both high- and low-speed compression with just a twist of the knobs. Out back, the FOX 2.0 shocks balance out the ride with race-developed internals and aluminum bodies that hold up to corrosion, hard use, and heavy loads. This setup gives you a suspension that's smooth on the road but doesn’t flinch when the trail gets rough.

Heavy-Duty Components That Work as Hard as You Do

BDS didn't cut corners on strength or reliability with this kit. Up front, it comes with high-strength tubular radius arms that mount into the factory locations and include built-in caster correction to keep your alignment on point. These arms offer improved ground clearance and feature OE-style rubber bushings at the frame for quiet, maintenance-free operation. To keep your steering dialed in, the kit includes a forged drop pitman arm and a heavy-duty track bar relocation bracket that maintains proper angles and keeps the axle centered throughout travel. Out back, the system uses a set of fabricated lift blocks and longer U-bolts to maintain a level stance and handle heavy payloads without sagging. Add in brake line brackets and sway bar relocation components, and you've got a full kit that installs cleanly, looks sharp, and performs far beyond stock.

Vehicle Fitment: 2020, 2021, 2022 Ford F250/F350 4WD Diesel

Application Notes:

• Ford recommends replacing pitman arm nut after removal.
• Overload spacer block required if truck has top overload spring.
• Use small pitman arm puller to remove drag link and stabilizer taper.
• Carrier Bearing Drop Kit may be needed for 2-piece driveshaft: BDS123402.
• Tremor models will not achieve full advertised lift height.
• Stock wheels with larger tires may cause brake line clearance issues.
• Minor trimming may be needed for 37x12.50 tire fitment.
• Installation requires torque wrench capable of 405 ft-lbs.
• Rear driveline vibration may relate to Ford Safety Recall 21S31.
• Recommended to complete recall work before installing lift kit.
• Fits SRW (Single Rear Wheel) models only.

Recommended Wheel and Tire Fitment:

• 37 x 12.5 with 17 x 9 and 5 in. Backspace
• 37 x 12.5 with 18 x 9 and 5 in. Backspace
• 37 x 12.5 with 20 x 9 and 5 in. Backspace