2020-2022 F350 6.7L Dually 4WD BDS 4in 4-Link Lift Kit | 1565H

20-22 F350 6.7L DRW 4WD BDS 4in 4-Link Lift Kit Features:

• Trucks With Dual Rear Wheels (DRW) Only
• Can Fit 37in tires With Minor Trimming
• Full length 4" ProRide Coil Diesel Springs
• FOX 2.0 Series Shocks on Front and Rear
• Requires cutting, trimming, and drilling
• No BS Hardcore Lifetime Warranty

Strong Radius Arms Included To Provide Stability

Take your 2020-2022 F350 Dual Rear Wheel Super Duty to new heights with this kit from BDS. This kit is designed specifically to work with your truck to not only give it a lift but also make sure it performs well at said lift. Part of the reason it performs better is because of the 4-link that comes as a part of the kit. The 4-link brackets are built from 1/4in steel and utilize heavy wall 2" OD DOM control arms to correctly position the front axle. The brackets themselves key off of the factory frame bracket and transmission cross member for extra strength. In addition to that, one of the stars of this kit are the full length 4" ProRide Coil Diesel Springs. These coil springs are pre-tuned for optimal performance on diesel trucks.

FOX Racing Shocks For Optimal Performance

The previously mentioned, FOX shocks to help it perform better than stock at it's new height. The FOX 2.0 Shock bolts into your Super Duty, and the reservoir can be mounted nearly anywhere that's convenient while adding a huge bump in suspension performance for your rear end. The shocks themselves are 2" in diameter with an aluminum body that improves cooling capability over the majority of steel-body shock on the market. Each shock has a 5/8" chrome-hardened shaft and valving that's been finely tuned to offer your truck excellent off-road performance with making your street ride too harsh. This kit has these particular shocks along the front and rear and is paired with a special black high strength u-bolt that is created to match with the specific axle for a more secure fit.

All-Inclusive Kit That Thinks of Everything

So the shocks, coil springs, and radius arms that are included in this kit are absolutely important, however what makes this kit really worth it is the smaller pieces that are vehicle specific which help the kit perform at it's best. One example is that BDS includes a forged drop Pittman arm and heavy duty track bar relocation brackets that come in and recenter the front axle and correct odd steering angles. BDS also made sure to add front bump stop extensions which limit suspension compression, sway bar drop brackets which correct positioning, and brake line relocation brackets. In addition, the kit includes a special transmission cross member and even rear lift blocks that help level out the stance.

Fitment:

• 2020, 2021, 2022 F350 6.7L 4WD DRW Super Duty
• For Trucks With Dual Rear Wheels ONLY
• For Diesel Trucks ONLY

Tremor Fitment Note: Due to taller factory ride height, Tremor models will not net full advertised lift height. Final right height will be the same as standard models.

37in Tire Note: 37 x 12.50 tires may require minor trimming.

Factory Leaf Spring Note:Removal of the factory leaf spring block required. Net rear lift will vary depending on height of factory block, but will result in a level stance.

Install Note: Torque wrench capable of 405 ft-lbs required for installation.

Two-Piece Driveshaft Note: Super Dutys with a two-piece driveshaft will require BDS's carrier bearing shim kit. Please ensure your F250 or F350's driveshaft type before ordering.