2020-2022 Ford F250/F350 4WD Gas BDS 5 inch Radius Arm Lift Kit w/ FOX 2.5 Elite Shocks | 1990FPE

F250/F350 4WD Gas BDS 5 inch Radius Arm Lift Kit Features:

• Fits F250 and F350 4WD Gas models
• Provides 5 inches of front suspension lift
• Clears up to 37 inch tires
• Includes gas-specific Pro-Ride coil springs
• Heavy-duty tubular radius arms with caster adjustment
• Forged drop pitman arm for steering correction
• Heavy-duty track bar relocation bracket included
• FOX 2.5 Performance Elite shocks with DSC adjusters
• External reservoirs improve shock cooling and control
• High-strength fabricated rear lift blocks
• Easy bolt-on installation, no cutting required
• Designed for on and off-road performance

More Stance and More Clearance for your Super Duty

If you’re ready to give your 2020-2022 Ford F250 or F350 Gas Super Duty a major boost in both capability and attitude, the BDS 5-Inch Radius Arm Lift Kit with FOX 2.5 Elite Shocks delivers in all the right ways. Designed specifically for gas engine trucks, this kit provides enough lift to comfortably clear 37-inch tires while maintaining proper handling and drivability on the road. Whether you’re looking for a more aggressive stance or you simply need the clearance to take on bigger obstacles off-road, this system has you covered. From daily driving to serious work and weekend adventures, this kit makes sure your truck looks the part and performs even better.

FOX 2.5 Performance Elite Shocks: Maximum Control and Comfort

While this kit can be paired with BDS’s standard NX2 Nitro or FOX 2.0 Performance Series shocks, the real performance advantage comes from stepping up to the FOX 2.5 Performance Elite Shocks. These larger-bodied, aluminum shocks are equipped with external reservoirs to manage heat and maintain consistent damping under extreme conditions. What really makes them shine is the Dual Speed Compression (DSC) adjusters, giving you the ability to fine-tune both low-speed and high-speed compression for your exact driving style, load, or terrain. Compared to the FOX 2.0s or Nitros, the 2.5 Elites deliver noticeably better control and ride quality, especially when pushing your truck off-road or towing heavy loads. You’ll feel the difference immediately in both small bump compliance and big hit control, making your Super Duty more capable in every situation.

Complete Radius Arm System for Real-World Performance

BDS rounds out this package with a pair of heavy-duty tubular radius arms, designed to correct caster and improve durability over the factory stamped arms. Up front, gas-specific Pro-Ride coil springs provide the correct lift and a smoother ride across any surface. To keep your steering geometry in check, BDS includes a forged drop pitman arm and track bar relocation bracket, ensuring your truck tracks straight and handles properly at the new height. Out back, the kit uses fabricated steel lift blocks and longer u-bolts to bring the rear up to match the front, keeping your stance level and your load capacity intact. Everything bolts on using the included hardware, making it a straightforward upgrade that transforms your truck into a taller, stronger, and more capable machine.

Vehicle Fitment: 2020, 2021, 2022 Ford F250/F350 4WD Gas Models

Application Notes:

1. Replace pitman arm nut after each removal
2. Overload spacer block UBT4027 required for overload springs
3. Front exhaust modification may be required on gas models
4. Use small puller to remove drag link and stabilizer taper
5. Carrier Bearing Drop Kit BDS123402 may be required for 2-piece driveshaft
6. Tremor models will not achieve full advertised lift
7. Stock wheels not recommended with larger tires
8. Trimming may be needed for 37x12.50 tire clearance
9. Installation requires torque wrench rated to 405 ft-lbs
10. Address Ford Recall 21S31 before installing lift
11. Fits Single Rear Wheel (SRW) models only