2023-2025 Ford F250/F350 4WD 6.7L w/o Rear Overload BDS 5 inch Radius Arm Lift Kit w/ NX2 Shocks & 5 inch Blocks | 2242H

F250/F350 4WD 6.7L BDS 5 inch Radius Arm Lift Kit Features:

• 5-inch front and rear lift height
• Heavy-duty tubular radius arms included
• Diesel-specific Pro-Ride coil springs
• Corrects caster and steering geometry
• Forged drop pitman arm included
• High-strength 5-inch rear lift blocks
• Extended brake line relocation brackets
• Standard NX2 Nitro gas shocks included
• 10-stage velocity-sensitive shock valving
• Clearance for up to 37-inch tires
• Easy, 100% bolt-on installation
• Compatible with 2-leaf main trucks

Level Up Your Super Duty’s Stance and Capability

If you're looking to raise your 2023-2025 Ford F250 or F350 Super Duty diesel without compromising ride quality, this BDS 5-inch Radius Arm Lift Kit with NX2 Shocks delivers a complete solution. Designed specifically for trucks without rear overload leaf springs, this kit gives you the clearance to fit up to 37-inch tires while improving both appearance and performance. Up front, you get diesel-specific Pro-Ride coil springs paired with heavy-duty tubular radius arms. These arms replace the thin factory stamped units, offering superior strength while maintaining proper caster alignment for stable handling. Combined with the included forged drop pitman arm and track bar relocation bracket, your steering geometry stays dialed in to handle the increased lift height, giving you smooth control on the highway and predictable tracking on rougher roads.

Proven Performance with BDS NX2 Nitro Series Shocks

While other kits on the market might leave you guessing about shock quality, this system includes BDS NX2 Nitro Series shocks built specifically for your truck’s weight and suspension travel. These nitrogen-charged, twin-tube shocks feature 10-stage velocity-sensitive valving that reacts quickly to changes in terrain, giving you the confidence to take on backroads, job sites, or daily commutes without sacrificing ride quality. The large 1-3/8-inch piston and durable construction ensure lasting performance under load, while the silver powder-coated finish keeps them looking sharp for the long haul. Whether you're towing, hauling, or just enjoying the new stance of your Super Duty, the NX2 shocks offer reliable control without the price tag of premium reservoir shocks.

Rear Lift with Heavy-Duty 5-Inch Block Kit

To complete the lift, this kit includes a high-strength fabricated 5-inch rear block designed to level the stance of your truck from front to back. The longer u-bolts and brake line relocation brackets make installation straightforward, but it’s important to note that this system is designed for trucks equipped with a 2-leaf main rear spring pack and does not fit trucks with factory overload leaf springs. Be sure to confirm your truck’s rear spring setup before ordering. Like the rest of the kit, these components are designed for a direct bolt-on installation, making it easier to get your truck back on the road or trail with minimal downtime. Built with premium materials and tested for long-term durability, this lift kit from BDS is the perfect choice for Super Duty owners who want a balanced mix of capability, comfort, and performance.

Vehicle Fitment: 2023, 2024, 2025 Ford F250/F350 Super Duty 4WD 6.7L Diesel without Rear Overload Springs

Application Notes:

1. Vehicles with radius arm mounted ride height sensors will require BDS123303.
2. Ford recommends the replacement of the pitman arm nut after each time it has been removed.
3. Use a small pitman arm puller to remove the drag link joint and steering stabilizer taper.
4. If your truck is equipped with a 2-piece rear driveshaft, a Carrier Bearing Drop Kit may be required: BDS123402.
5. Due to the taller factory ride height, Tremor models will not net full advertised lift height. Final ride height will be the same as standard models.
6. Larger tires on stock wheel are not recommended due to interference with brake line, radius arm and sway bar. Use recommended specs listed in wheel and tire fitment section.
7. Minor trimming may be necessary for clearance of 37x12.50 tires on certain wheel setups.
8. Installation requires a torque wrench capable of 406 ft-lbs.
9. Vehicles with leaf spring ride height sensors must select a kit with rear blocks.
10. Fits SRW models only.
11. Recalibration of your vehicles Advanced Driver Assistance System (ADAS) cameras, radars, light detection and ranging (LiDAR), and other sensors may be necessary by your local dealership or ADAS service center. This will ensure proper functionality of the vehicle features such as lane keeping, lane departure, parking assistance, blind-spot detection, adaptive cruise control systems, and other functions as they did prior to installation. Please connect with your local dealership or ADAS service center. Similar to a wheel alignment, all charges and expenses that may occur from dealership calibrations and adjustments are the sole responsibility of the vehicle owner.