2024-2025 Toyota Tacoma ReadyLift 1 inch Rear Spacer Kit | Part# 26-54100

Tacoma ReadyLift 1 inch Rear Spacer Kit Features:

• Adds 1 inch of rear lift
• OEM-style design for a factory-like fit
• Improves stance with extra rear rake
• No modifications required for installation
• Compatible with factory rear coil springs
• Enhances clearance for larger tires
• Maintains factory ride quality and handling
• Sold as a pair for both rear springs
• Not tested on TRD Pro or Hybrid models

Add Rear Ride Height for a More Aggressive Stance

If you've noticed the rear of your 2024-2025 Toyota Tacoma sitting a little too low, whether from added weight, towing, or just the way your truck sits after a front-end lift, the ReadyLift 1-Inch Rear Spacer Kit offers a simple and effective fix. It gives the rear suspension a slight lift, adding an extra inch of height without compromising ride quality or requiring major modifications. Whether you're looking to restore some factory rake for hauling gear, compensate for a front lift, or just improve the stance of your truck, this kit gets the job done. One of the main reasons to install rear spacers is to help with towing and hauling. If you regularly carry a heavy load–whether it's a trailer, a bed full of tools, or a weekend's worth of camping gear–you might notice the back end squatting lower than you'd like. By adding a little extra lift, these spacers help maintain a more level stance and reduce sag when the truck is under load. Even if you don;t haul heavy, that extra height can prevent excessive rear-end droop over time. Another common reason for this upgrade is balancing out a front-end lift. If you've installed a leveling or lift kit that raises the front of your Tacoma, you might find that the rear looks too low in comparison. This kit is actually the same rear spacer used in ReadyLift's 2.5-inch SST lift kit, but now you can buy it separately to fine-tune your truck's stance.

Direct-Fit Installation

Installation is straightforward with no cutting or modifications required. These spacers are designed to fit right onto your factory rear coil springs, so you don’t have to replace or adjust any other suspension components. It's a simple bolt-on solution that works seamlessly with your truck's stock suspension while providing a little extra height where it counts. If you're looking for an easy way to improve rear suspension performance, maintain better load balance, or match a front-end lift, the ReadyLift 1-Inch Rear Spacer Kit is a smart and reliable upgrade. It's a quick fix that makes a noticeable difference, whether you're towing, hauling, or just want your truck to sit right.

Vehicle Fitment: 2024, 2025 Toyota Tacoma

Fitment has not been tested on TRD Pro or Hybrid models