Recon Pro-Performance 10,500lb Winch (Waterproof) 264100PPW

Water-Proof, All-Weather Design

A winch for any application, climate, and terrain is probably more important than it's overall pulling ability, especially for avid off-road fanatics. Recon's Pro-Series winch may not have the outright pulling power of their BRUTE FORCE series system, but it makes up for it by being completely waterproof with the ability to pull up 10,500lbs -- more than enough to get most vehicles out of tough spots out on the trail or out in the wilderness. The Pro-Series comes equipped with 88ft of high-strength synthetic rope that won't get weakened by extremely wet conditions.

Fast Line Speed and Heavy-Duty Construction

The Pro Performance Series winch is based on a 6.5 horsepower electric motor that uses a 3-stage planetary gear train with a 218:1 drive ratio that gives this winch extremely fast 28 feet per minute line speed. The winch comes standard with a sliding ring gear clutch and an automatic in-the-drum brake. The solenoid has a IP67 water resistance to handle practically any climate or off-road condition. The 2.5" drum feeds the winch line through a heavy-duty aluminum hawse fairlead that minimizes wear on the fibers.

Includes Battery Wiring and Hardware

Each of the Recon Pro Performance winches feature a fairly standard 4.5"x10" bolt pattern that allows it bolt up to most winch mounts, aftermarket off-road bumpers, and optional factory mounts without serious fabrication or modification. The winch comes with 2-gauge battery leads and runs off 12-volt DC sources. Recon recommends using at least a 650CCA for winch operation alone, and higher if you're running other electricity-hungry hardware. The winch comes with hardware and instructions.