2009-2014 Ford F150 & Ford Raptor Recon LED 3rd Brake Light (Smoked) | 264111BK

Easy install and good fit. I did have to refer to a video on YouTube for the correct wiring however. Black goes to OEM black, white to OEM white and red to OEM red. The blue stripe wire is not used. Hope this is helpful!! GREAT PRODUCT

Great product. Took 10 minutes to install and made a huge difference changing up the look. LEDs a lot more visible than factory bulbs.

This was one of the easiest upgrades to put on. Looks great too. The only down side is it should come with wire connectors and some shrink to put over the cuts.

I was little on the fence buying this, but very glad I did. Budget be damned! By the time I found my Phillips head, unpackaged the light, and a new package of silicon, oh, and had to find some scissors to cut the silicon applicator, I had about 30 minutes total for the install. As most have said, you have to cut, splice, tape, crimp, solder, yada yada. I used three of these little gems on Amazon: They don't allow links on here, so go to Amazon and search Non-stripped Wire Connectors for Cable, Wire Joint without Stripping and Soldering, Suitable for Various Wires, Splitting T Type 1 Pin, Pack of 10 Cost about $6 for a 10 pack with Prime shipping. These let you tee off right before the light socket and joins to the wires of your new light. Just put in the wires and squeeze. That's it! If you are feeling a little weak that day and your squeezing power is low, grab some pliers like I did! If you love these as much as I do, you'll name your next child after me! Seriously, they should offer these at Stage 3, or Recon should put some in the box. If you ever need to go back to stock, you'll still have your stock light sockets fully functional, and re-coupe your expensive light to sell, or move to another F150. Now my opinion on the light itself. I looooooove it! As some have said, the cargo lighting isn't great. Well, that is true, but in the dark it's better than nothing. The stock one wasn't that stupendous anyway. If you really want your bed lit up, invest in a LED bed lighting kit. It's on my truck todo list. Most of us that bought this light, bought it mainly because it looks badass! It does just that, especially on my black truck. I even got a friendly toot toot of a train horn from a lifted Chevy on the road. I'm sure that was train-speak for Hey man, badass truck!. Man, now I need a train horn.....

Easy install and really brings the back of the truck together when paired with the recon tail lights. LED's are bright and it doesn't get moisture inside. Great fit and finish and is well worth it's price. Took me about 15 minutes to install is all.

Excellent quality, shipped fast, simple install and looks so good I went back and got the Recon tail lights. Thanks S3M!

Install is easy... Does not fit flush like original. Lights are dim. Leaks worse than original which is why I got it. Frustrated...

Fit good. The foam seal is much harder then the factory one so it sits a little higher off of the cab sheet metal surface. Hardly notaceable. Snug the bolts a week later after the foam seal settles.

Very easy install! Literally took 10 minutes. For those first time modders that might be nervous about cutting the factory wires, my truck did not have a white wire - I had red, black and blue. Still connect red to red and black to black and just connect the blue factory wire to the white wire for the light. And as stated before, I would strongly recommend shrink wraps to put around the connections. Good luck!!

Excellent product! Easy to install. Instructions r correct even though it says they r for F150 2009-2012. If u install this 3rd brake light on a Raptor the instructions r different, but it is explained at the bottom of the instruction page. Light works great and looks awesome on the truck!

Shipping took about a week which wasn't that bad. The install took maybe 10 min, super easy! The fit on this is why I gave it 2 stars. There is a small gap between the light and the truck. I don't know if the gasket was to big, or what. It's supposed to rain today so hopefully it doesnt leak! I'm going to look into using the old gasket from my stock light, or get some silicon. For $84 you would think they would make it fit flush!

Fitment was way off. I had to sand at least 1/2 of extra plastic off of the back to make it sit flush. The supplied gasket was also too thick to use, substituted with silicone. Looks good but could definitely be brighter.

Pricey and doesn't include splicers or crimp connectors. foam is way to thick, so the light doesn't sit flush. I plan to replace the foam with clear silicone

Easy install, make sure you wire right. Being that it does not have the led running lights, make sure you grab the right wires to splice into. I have a black f150 raptor truck and this is the perfect fit.

Stock third brake light was leaking. I tried to clean it and use Butyl tape to seal it up. While cleaning the chrome inside the light flaked off and glittered the red brake area of the light. It sealed fine but looked like garbage. New OEM light was around $120. This light looks better. I already had LEDS and these are just as good. I used wire taps and folded the wire from the Recon light to ensure connection. Took all of 10 minutes to swap out. So far no leaks and it looks/functions well.

Super easy install, love the smoked lens, lights are not that bright but it's OK. Highly recommend.

It will do. The box indicates 2009 to 2012 F150 but installed fine. The lens is not flush with the opening and sticks out about 1/4 inch further then stock but seems to be sealed ok.

Great product, easy to install. Not near as bright as I had hoped for

Cool addition to my truck. The smoked lens blends in well with my black truck. Installing the light was easy enough, as mentioned though, it would be great if it came with some shrink wrap since you have to splice some wires. I ordered this light because my stock 3rd brake light assembly cracked. This light was less expensive than a stock replacement from the dealership (and looks better, in my opinion)!

great looking third brake light. Kit comes with easy to follow wiring instructions, but doesn't come with any wire connectors which I found odd. Easy install, you'll need some wire strippers.

Excellent quality and looks. Lights not as bright as I had hoped.

Lights look great! But expected them to be lighter. Easy to install, but expected them to be lighter. Over all I'm ok with them but expected them to be lighter!

Looks better than the stock lens and matches the black accents on my truck better too. Not as bright as the factory if that matters to you. Nice!

The rear light looks great and easy ti install. Had my shop do it. The only thing it didn't fit good. There is a small gap open between the light and the body. For the rest I'm quite happy.

Quality item. Easy install, suggest soldering connections instead of quick splices or butt connectors. If you expect the cargo lights to throw enough light to light the cargo area, you'll likely be disappointed. They are prety dim. In my case, it didn't matter, I remove the light bulbs anyways from all my stock lights.

Love the look coupled with my new HD/Raptor tail lights. Changed the look of my sterling gray for the better and the L.E.D.'s look great!

Looks and works great, thanks.

Nice addition to the overall look of the truck. Pros: Easy installation, fast service after order placed. Cons: Smoked light protrudes about 1/4 from the actual truck surface, not flush as original light, no heat shrink provided for making connections.

Looks great, lights are very bright, easy installation.

Took about 10 minutes to install. I think they fixed the wiring issue because mine was straightforward. Have not been out in the rain yet so we will see about the new gasket. I may still go get some black silicone to cover it. I painted my screwheads black to match. Looks good!

Recon has really done it, they charge a premium price for a 'made in china' quality product. The circuit board is cheap, and the LEDs used are unimpressive to say the least. Ironically, on the box it states No Splicing Plugs into factory connectors , neither of which is true for the F150 application. All that being said, it sure looks a lot better than the factory chrome/red unit on my Green Gem paint.

Great if you are trying to black everything out and yet the lights are very bright when engaged...great product

Looks good, functions well, and install is really straight forward. The gasket for the light is much better than the oem light and gasket. It does not sit flustered but it still looks great.

This brake light looks perfect on my black truck, the shop that installed it said it was a little tricky but it looks and works great. Awesome upgrade that has a nice bright light that illuminates the truck bed when needed.

nice add on to my vehicle easy install and compliments every day on how good it looks

Easy install, looks clean and i always get compliments. Stage 3 has great customer service as well, always answered questions

Fast shipping, easy to install. Took about 15 minutes. LEDs are much better than stock light. Definitely getting the recon tailights to go with this.

fast shipping, easy install, had to have could'nt stand that ford put a chrome 3rd brake light on a fx4 that all other lights are black housing this makes a huge difference to me on giving a much cleaner look

easy to install. Soldered the wires together and heat shrinked them. Laid a line of silicone around the gasket for extra protections. Looks great.

Great service from stage 3, fast shipping. As for the 3rd brake light goes easy install took less than 10mins followed their directions and put RTV silicone around the gasket. Looks great preforms as expected. I'm waiting to see how bright the cargo lamps are at night. Thank you stage 3 for the great service and fast shipping. I would definitely recommend this product.

These smoked lights truly are more for looks than function. they're bright enough to see from far away just not enough to light up the bed. It looks great though and very simple install using quick splices. the only issue is the gauge of wire for the recon light is much smaller than that of the oem harness so i had to double up the wire to make good contact in the quick splice. other than that its pretty straight forward and took me less than 15 minutes to complete. thanks!

Great tailights. Look awesome on any colour truck. Fit perfectly and something to add to ur truck. Thanx stage three

this is a great product, easy install, and looks great, huge upgrade over factory

Install time is short but it is not plug and play and the middle cargo light is not as bright as I wanted and it doesn't shine into the truck bed like it should.

Love this thing!! It installed so easily in no time at all and looks fantastic.

Another outstanding RECON product. Easy install and looks amazing when paired with smoked tail lights.

Install was quick and product looks awesome, so much so I bought smoked HD tails to match better. However, the seal wasn't great. This was to replace a leaking factory light, but there was a large gap at the bottom. I used 3m strip caulk and things seem to be good so far. Nervous about the auto car wash still. Will see how it holds up.

Seals well and looks great

Great light, took about 15 min to install. Super easy, would recomend painting screws black when changing light to complete the look.

Straightforward wiring, just read the instructions for the Raptor as you have to connect BLACK to WHITE which is not usually the case. Great product...installed in about 10 mins.

High quality, easy to install. Looks good. My only suggestion is the product should include the mounting screws.

Looks good. We'll have to see how water tight the fit is. Just in case, I sealed the edges with silicone. I'm tired of the rain ruining the back leather seats.

Great quality party great fit highly recommended it.

Item was shipped fast and I was able to install it within 10 minutes. If you have a raptor, pay attention to the instructions as the wiring is backwards and not obvious or laid out in a practical way. Things you will need: wire strippers, shrink wrap, heat gun and either a ferrel or some type of simple air tight insulator to go over the bare wires. If I remember correctly, the wires are 20 guage, so simply take wire strippers and score the wire with the 22 guage part about 1/8"-1/4" and strip with 20 guage section, then trim as needed. On the truck side, remove power, then cut wires leading to bulb housing and attach them to new LED housing in accordance with the sheet provided by Stage 3 Motorsports. Turn your vehicle on and if you see the white LEDs come on, you installed it correctly! Thanks S3M!

Got this for my son for Christmas. He absolutely loves it

So I purchased the Recon 3rd Brake Light on Monday; it arrived Tuesday and I installed it myself on Wednesday. The light looks great and the LEDs are def better than the OEM fixture. However, the install was a nightmare. If you have a 2010-2012 raptor, you gotta make sure you read the instructions completely and look up additional instructions online on one of the many Raptor specific forums. Splicing the wires is important, but more important is where you splice them. Cut the OEM bulb wires completely as they are not needed. As others have noted, the Recon is NOT flush with the OEM fixture point, BUT its not a huge deal. It sits nicely and honestly unless you know what to look for, no one will notice.

Totally awesome!

Easy install. Looks great and gets rid of the white look on the back.

Perfect fit, easy install, simple instructions. Be careful pulling out the OEM light, the back edge is sharp (I have the paper cut to prove it)!

Still waiting for it to arrive because of the winter storm here in western New York.