High-Performance 3.5L F150 EcoBoost Package
After years of real-life Research and Development, Dyno-Testing, and trials on the track, the folks at Banks Power know what it takes to get every extra ounce of horsepower and torque that's possible out of the F-150 EcoBoost's 3.5L engine in order to get it running at its full potential. Whether you need improved performance for towing, hauling, off-road action or improved fuel economy, the Banks Stinger System adds
gains of up to +27 hp/+29 lb-ft of torque at the rear wheels of your F150. This complete package of high-quality components will not only improve performance of your truck but improves its looks and sound as well. The Banks Stinger System includes a Banks Ram-Air® Intake System, Banks AutoMind® Handheld Programmer and a stainless steel Banks Monster® Single Exhaust with a polished chrome tip.
Incredibly Powerful Handheld F150 AutoMind Programmer
While the Stinger System from Banks does not require a custom tune, any time you're adding multiple high-performance components to your F150 at the same time, it's always a good idea to communicate all of these new modifications to your engine's system to maximize all of this newly added power. The foundation for all of this increased power is the AutoMind Programmer which is a complete PCM tuning device that ties directly into your truck's OBD-II port and gives you the ability to instantly upload one of (3) pre-programmed performance tunes to your EcoBoost's PCM, giving you improved horsepower, excellent torque gains, increased fuel economy, and improved drivability thanks to finely-tuned transmission programming. Each tune is broken down into different fuel-octane specific performance levels to maximize their power outputs for any application (Towing, Sport, Fuel Economy) or back to stock settings if necessary. You'll also have the ability to view/clear DTC codes, remove your speed limiter, adjust your rev limiter, change your shift points, and several other settings to get your F150 running just how you like it.
Banks Power Monster® Exhaust System
Banks knows that one of the best ways to improve the performance of your 3.5L engine is to swap out your restrictive factory exhaust system with high-performance components. Their powerful Monster Cat-Back Exhaust Systems instantly give your F150 a rumbling roar to match its aggressive looks as well as an overall improvement in horsepower, torque, throttle response and fuel economy. Engineered out of 409 Stainless Steel, the exhaust features 3" mandrel-bent tubing with a 3.5" tailpipe and a beautifully polished 5"x6" Chrome tip. The tailpipe exits to the rear passenger side, behind the tire. Each exhaust system kit comes with all the necessary installation hardware and detailed instructions.
Banks RAM Cold Air Intake
On its own, Banks Power's RAM Cold Air Intake pulls some serious power out of your tough F150 and together with the Stinger System, this intake greatly enhances your overall performance and is
64.6% less restrictive than stock at 600 CFM. By replacing your restrictive factory air box and tubing with this RAM Cold Air Intake you instantly get improved airflow for increased horsepower, torque, better gas mileage and lower EGTs. The Banks Ram Air Intake Kit is a bolt-on system that drops right in place of your factory air box and provides your engine with a larger volume of charge air at cooler temperatures and higher velocities than your stock intake components. This intake is built around a large diameter Banks Lifetime Filter that can be washed and re-used as many times as you need for the life of your truck, saving you money down the road versus buying disposable filters at regular maintenance schedules. The Banks Ram Air Kit comes with a full set of high-quality hardware and installation instructions.
Fitment:
- 2011-2014 Ford F150 EcoBoost - 3.5L ONLY
- Regular Cab - Short Bed
- Crew Cab - Short Bed
- Crew Cab - Long Bed