2011-2024 Ford F150/Ford Mustang UPR Billet Adjustable Hi-Flo PCV Valve Fitting | Part# 5045-24

F150/Mustang UPR Billet Adjustable Hi-Flo PCV Valve Fitting Features:

• Reduces excessive crankcase pressure
• Allows for fine tuning of the PCV system with or without Catch Cans or Breather tanks
• Factory Cam Groove for an easy installation
• Exclusive Locking Set Screw System
• Show Quality Black Anodized finish
• Fully Adjustable design
• OEM O-ring Seal
• Allen Wrench

Adjustable PCV Valve Fitting by UPR

If you want to maintain optimal engine performance in your 2011-2024 F150 or Mustang, look no further than the UPR Billet Adjustable Hi-Flo PCV Valve Fitting! At its core, this product addresses a common but often overlooked issue in the F150 and Mustang platform: excessive crankcase pressure. In simpler terms, think of your vehicle's engine as a large air pump, continuously moving air and gases. Some of these gases escape into the crankcase, and if not properly managed, can lead to reduced efficiency and potential damage. Whether your vehicle is equipped with Catch Cans or Breather Tanks - devices designed to capture excess gases - this fitting can be adjusted to work seamlessly, ensuring only clean air is recirculated back into the engine. This not only helps in controlling oil consumption but also aids in improving combustion, making your engine run smoother and last longer.

High-Quality Construction with Adjustable Design

The UPR Billet PCV Valve Fitting comes with four interchangeable jets, allowing for precise control over the PCV system's flow, tailored to your vehicle's specific needs. Whether you're using a closed catch can system or a vent-to-atmosphere breather tank system, this fitting adapts to ensure your engine remains free from the adverse effects of oil consumption, excessive burning oil, or oil ingestion. What's more, installation is made simple and straightforward thanks to the included Factory Cam Groove and the Exclusive Locking Set Screw System. This allows you to secure the fitting without the need for any extensive modifications, thanks to the included Allen Wrench. All in all, the UPR Billet Adjustable Hi-Flo PCV Valve Fitting is not just an accessory but a vital component for maintaining the health and efficiency of your F150/Mustang's engine.

Vehicle Fitment:

• 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024 Ford Mustang 2.3L
• 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024 Ford Mustang 5.0L
• 2015, 2016, 2017, 2018, 2019, 2020 Ford Mustang Shelby GT350 5.2L
• 2020, 2021, 2022, 2023, 2024 Ford Mustang Shelby GT500 5.2L
• 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024 Ford F150 EcoBoost 2.7L/3.5L
• 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024 Ford F150 Raptor EcoBoost 3.5L
• 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024 Ford F150 5.0L
• 2021, 2022, 2023, 2024 Ford F150 Raptor R 5.2L
• 2011, 2012, 2013, 2014 Ford F150 SVT Raptor 6.2L

Installation Adjustable Versions:

• Installs in minutes. Simply remove your factory PCV fittings with a small pliers by turning them counterclockwise and then you just install the UPR Hi-Flo Billet PCV fitting and then you can gently tighten the set screws and connect your factory plug n play fitting and never look back. Includes 4 Jet sizes and application basics for Adjustable version are explained below:
• .100 Jet size is slightly more restrictive than the factory PCV fitting to allow you to restrict the PCV for vehicles ingesting too much oil through the PCV and wanting to reduce oil consumption.
• .125 Jet size is slightly less restrictive than the factory PCV fitting to allow you to adjust the pcv to increase flow a bit more than factory for vehicles that only need minor adjustments to eliminate vapor locking in the PCV system.
• .150 Jet size is even less restrictive for the boosted vehicles that tow and are driven harder to increase flow more than factory for vehicles that only need more adjustment to eliminate vapor locking in the PCV system.
• .175 Jet size is the least restrictive compared to the factory PCV fitting and allows for the largest adjustment of the jets for modified vehicles that generate a lot of blow-by / back pressure to eliminate vapor locking / flooding the clean side of the PCV system with oil.