2011-2014 F150 4WD Rough Country 6" Suspension Lift Kit with N3 Shocks 57530

11-14 F150 4WD Rough Country 6' Lift Kit with N3 Shocks

We price match! Call 623-434-5277!

Part#:

57530

3 Review(s) Write a Review

9 Customer Q&A(s)

$1,093.28

1 in stock:

You will earn

Reward Points with this Purchase.

Product Features
3 Customer Review(s)
9 Q&A(s)

Highlights:

Adds 6" of front ride height while raising the rear
Built around front strut spacers and rear blocks
Includes crossmembers, drop brackets, and knuckles
Comes with N3 rear shocks
Requires cutting and drilling
Instructions and hardware included

Complete 6" Lift Kit for a Great Look and More Capability

Despite their substantial overhaul on the looks department, the 2011-2014 F150s still look at their absolute best when fitted with a big lift kit and standing on larger and more aggressive wheel and tire options. Our friends over at Rough Country have an excellent way to make it all happen with this awesome 6" Suspension Lift Kit for the 2011-2014 F150s with 4WD. Each one of these kits adds up to 6" of ride height to your truck and allows you to fit on 35x12.50" tires when using at least 18" wheels with 4.50" of backspace. The Rough Country 6" Lift Kit comes with a full set of front and rear lift hardware that work together to give your truck an aggressive new stance, improved ground clearance, and one of the best looks that you'll find on the street or the trail.

Features Strut Spacers and Crossmembers with Differential Skid Plate

Each one of Rough Country's 2011-2014 F150 6" Lift Kits features strong lift components and high-quality hardware. The front ride height increase is provided by a pair of front strut spacers that install right on top of your factory struts and bolt into your F150's body mount. The strut spacers are paired with lifted knuckles with long spindles that keep your F150's factory upper control arms near OEM angles and specs. The front end lift components also include a front and rear crossmember and differential drop brackets that adjust your F150's lower control arm angles and CV angles back to OEM specs to prevent wear, keep near-OEM ride quality, and to maintain proper travel. The front lift components come with all the hardware you need to get them installed on your aggressive 2011-2014 F150 build.

Fabricated Rear Blocks with N3 Rear Shocks

For the rear of your truck, Rough Country uses pair of specially-designed rear blocks to add ride height, and they come with a full set of installation and supporting hardware to give your 2011-2014 F150 a great ride. Each of the rear blocks are fabricated, instead of cast, and feature an anti-wrap design that helps prevent axle wrap in extreme applications or on F150's churning out more power than stock. The blocks come with longer U-bolts and install right in place of stock in a very simple, drop-in installation. Each kit comes with a pair of Rough Country's N3 rear shocks that feature a gas-charged internal design with velocity-sensitive valving that provides excellent handling and ride quality across a variety of applications.

Fitment: 2011-2014 F150.

Wheel Fitment: This kit requires at least 18" wheels with 4.50" of backspace to a clear a 12.50" wide tire.

Stock 18" Wheel Note: Stock 18" wheels can be used with this kit, but are limited to a maximum of an 11.5" wide tire.

Would it be possible to add coil overs to this kit?

Asked by: Nate - 6/1/2016

You could add coilovers to this system fairly easily. Since the lift uses a strut spacer, you could technically use any stock-replacement coilover kit meant for the 2011 to 2013 F150s. However, you'd likely want to get a spanner wrench to lower their out-of-the-box ride height down so you're not pushing your lift too high. If you want a full-length coilover to replace both your stock coilover assembly and the kit's strut spacer, then take a look at the BDS Fox 2.5 Coilover Kit for 6" Lift Kits.

Was this answer helpful? 1 of 1 Found Helpful.

Answer provided by: [email protected] (6/2/2016)

Submit an answer

Hi, I got 2013 f150 fx4 4wd installed with roughcountry 6 inch lift. Will the raptor oe fox front shocks will fit this kit? if not what choice do I have to replace the front shock? thx

Asked by: Sam Gao - 7/10/2015

They technically will, assuming you reuse the strut spacers that are included in this kit. With the strut spacers in place, you can technically run any aftermarket strut or coilover that's meant for an F150 at stock ride height. If your goal is to get rid of the spacers, then you'd need BDS's Fox 2.5 Front Coilovers for a 6" Lift.