2017-2022 Ford F250 4WD Mcgaughys 6 inch Lift Kit S/S Black | 57290

F250 4WD Mcgaughys 6" Lift Kit Features:

• Provides 6" of overall lift
• Delivers a commanding stance
• Radius arms for controlled suspension movement
• Billet face plates for front radius arms
• Sway bar drops and brake line brackets improve clearance
• Does not compromise factory ride quality
• Accommodates larger tire/wheel combinations
• Powder-coated black components for durability
• Built with high-quality materials

Improve the Strength and Performance of your Truck's Suspension

One of the easiest and most common upgrades made to the 2017-2022 F-250 Platform is the addition of a premium lift kit. While there's a ton of lifting solutions on the aftermarket for Super Dutys, not all offer the heavy-duty components found in the McGaughys 6" Lift System! At the heart of this kit lies a pair of heavy-duty front radius arms which work to compensate for the massive increase in ride height, all while ensuring proper suspension articulation and geometry. The radius arms also provide lateral support and vibration reduction to ensure a comfortable ride each time you get behind the wheel. What's more, this system is equipped with billet face plates for the radius arms to add even more strength to your truck's suspension while allowing for better alignment to provide a more controlled and responsive ride. You'll also receive a complete set of front and rear shocks which work to improve ride quality beyond your truck's stock suspension setup. Better yet, this kit permits you to throw on massive tire/wheel combinations to fully transform your ride into a formidable off-road machine.

Boost Your Rig's Drive Quality and Comfort

Aside from the performance and strength gains your truck's suspension will receive, McGaugys has thrown in a ton of other various suspension components to ensure your truck is equipped for any adventure you have in mind. Components like the sway bar drop brackets, brake line brackets, and steering shock drop work to provide more clearance for the suspension, accommodating for the overall increase in ride height. The pitman arm and track bar bracket are designed to improve suspension articulation and geometry, ensuring your ride still maintains the same levels of quality and comfort that you felt from the factory. Best of all, many of these components come complete with a black powder-coating finish to help combat the damaging effects of both rust and corrosion, offering up a lasting appeal you'll be sure to appreciate. For a complete catalog of everything that comes equipped in this kit, be sure to check out the list down below.

Vehicle Fitment: 2017-2022 Ford F250 4WD

Kit Components:

• (2) Radius Arms
• (2) Billet Face Plates for Radius Arms
• (2) U-bolt Retainers
• (2) Lift Blocks w/ U-bolts & Hardware
• (2) Sway Bar Drops
• (1) Track Bar Drop Bracket
• (2) Front Bump Stops
• (1) Steering Shock Drop
• (1) Drop Pitman Arm
• (2) Front Brake Line Brackets
• (1) Rear Brake Line Bracket
• (2) Coil Springs
• (2) Front Shocks
• (2) Rear Shocks

Important Notes:

• Gas model trucks will require exhaust modification
• If your vehicle is equiped with a two-piece drine line, then you will also need McGaughys carrier bearing shim kit (#57203). Sold separately.
• Over-sized tires and heavier wheels can cause premature wear on factory and aftermarket components like ball joints, bushings, tie-rod ends, wheel bearings, idlers arms, drive-lines, etc… You may need to replace / install new components sooner than factory recommendations based on the wheels and tires you choose. Please note that the heavier and wider wheels and tires combined with aggressive driving (off-road and on highways) will cause more wear on ALL moving parts, factory and aftermarket. Especially when vehicle is in 4wd or Auto-4wd / AWD modes.