2017-2018 GM Colorado & Canyon 4WD BDS 5.5" Suspension Lift Kit 722H

Highlights:

• Big, tough look for your Colorado or Canyon
• Clearance to mount big tires
• True 5.5" suspension lift kit
• Includes new crossmembers, knuckles, and hardware
• 4" rear block with choice of shocks
• Backed by BDS limited lifetime warranty
• Requires trimming, drilling, and minor welding

Provides Clearance for Big Tires and Adds a Big, Aggressive Look

The Chevy Colorados and GMC Canyons are some of the most capable mid-size trucks on the road, but you can turn your own GM Colorado or Canyon into an aggressive monster both on and off the road with the right lift kit. BDS's 5.5" Lift Kit for the Chevy Colorado and GMC Canyons adds some serious ride height to your truck and gives you the clearance to fit up to 34.5" tires on wheels with the correct backspacing and offsets. The combination of lift height and tires can give your Canyon or Colorado the ground clearance it needs to tackle nearly any terrain and give your truck an awesome and aggressive look that is sure to turn heads both on and off the road. The BDS lift kit adds 5.5" of front ride height to your Colorado or Canyon along with an increase in rear ride height from a larger rear block and comes with new crossmembers, knuckles, and other hardware to correct your truck's front suspension geometry so that you get full travel and articulation at your new ride height.

True 5.5" Suspension Lift with Dropped Crossmembers, Extended Spindle Steering Knuckles, and other Hardware

The BDS 5.5" Lift Kit for the GM Canyons and Colorados adds a true 5.5" front lift to your truck and comes with everything you and your truck need to get that towering, new ride height. BDS's lift kit adds its ride height through a set of strut extensions that install on top of your Colorado's or Canyon's factory coilover assemblies. BDS includes fabricated crossmembers made from extremely thick and gusseted steel that can survive just about anything you can throw at your Colorado or Canyon to correct your LCAs. To fix your UCA and tie rod angles, BDS includes CNC machined ductile iron steering knuckles with extended spindles and raised tie rod mounts. BDS includes new MOOG tie rod ends to prevent having to clearance your factory tie rod ends. Each BDS kit comes with differential drop brackets and a skid plate than spans the front and rear crossmembers to help keep your front differential protected at its lowered height.

4" Rear Lift Block with your Choice of BDS NX2 or Fox 2.0 Rear Shocks

Adding rear lift to the rear of Canyon or Colorado is a larger rear block that's paired up your choice of BDS or Fox shocks to handle the new lift height. Each one of these kits comes with a 4" rear block and new U-bolts that replaces your factory block adds just enough rear lift to get your Colorado or Canyon to a nearly level stance. The rear block is paired up with your choice of either BDS's NX2 shocks or a set of awesome Fox 2.0 monotube rear shocks that give your Colorado or Canyon excellent on-road handling and off-road performance. To help correct driveshaft angle, BDS includes a transfer case indexing ring and all its required hardware. BDS backs their entire kit with their "No BS" limited lifetime warranty and includes all necessary installation hardware and instructions.

Fitment:

• 2017-2018 Chevy Colorado 4WD
• 2017-2018 GMC Canyon 4WD

ZR2 and Diesel Fitment: this lift kit will not fit ZR2 models or models with diesel engines.

Requires trimming and drilling: this kit requires trimming your factory subframe and inner fenders and drilling in several locations for proper fitment.

Backspace requirements: this lift kit will not fit the factory 17" or 18" wheels. Aftermarket 17" or 18" wheels with a maximum of a 4.5" backspace are required to clear a 295 wide tire. Aftermarket 20" wheels with a maximum backspace of 5.25" are required to clear a 305 wide tire.

Weld-on steering stops: 17" and 18" wheels with larger than recommended tires will require the use of BDS's included steering stops, which must be welded on to the factory UCAs.

Exhaust fitment: this lift requires clearancing of your factory crossover pipe for proper fitment and may not be compatible with aftermarket exhaust components with larger tubing than stock.