Airaid Filter Tune-up Kit with Aerosol Oil (Red) | 790-550

Complete Cleaning Kit for Oiled Filters

AIRAID Cleaning Solution is uniquely formulated to clean without damaging the gauze filter media. AIRAID Performance Oil forms an additional line of defense against dirt without limiting airflow. Clean your AIRAID filter every 30,000 to 50,000 miles for normal driving, or more often for off-road and heavy dust conditions. For SynthaFlow (oiled) filters, you should oil your filter after each cleaning to maintain proper filtration. AIRAID Performance Oil was formulated specifically for AIRAID Performance Filters.

Step 1: Clean

Gently shake off your filter and brush away excess dirt. Spray on AIRAID Cleaning Solution so that the filter is fully saturated, and let soak for 10 minutes. Rinse filter from the inside out until the water comes through clear. Use only low pressure from a tap or garden hose.

Step 2: Dry

Allow filter to air dry. A fan may be used to speed up the process. DO NOT use heated air blowers, compressed air, or open flame.

Step 3: Apply Oil (for SynthFlow filters only)

Make one careful application of AIRAID Performance Oil to each filter pleat on the outside of the filter only. Allow oil to seep into filter for 20 minutes. Lightly re-oil any areas that still appear dry.

For those of you with blue filters, see our AIRAID Filter Tune Up Kit w/ Blue Oil.

Important Notes:

• Never use gasoline, detergents, steam cleaning, or parts solvent to clean your filter.
• Never use transmission fluid, motor oil, diesel fuel, or light weight oils to oil your filter.