2015-2020 Ford F150 Husky Rear Wheel Well Guards (Pair) | 79121

Items shipped fast, i was impressed with the quality of the Husky liners. I normally would buy Ford oem liners but for the cost I decided to go with the Husky's. Easy install, there is no need to remove your wheels, I highly recommend! Thanks Stage3motorsports!

I don't leave many reviews but figured I could help some of you with the fit of these. It will save you a lot of cursing and a half an hour of wrestling each side trying to get them to fit and the holes to line up. My wife bought these for me as an early Christmas present. I don't Black Friday shop except online so I took the day to get these out of my living room. Starting on the driver's side, I wrestled it into the wheel well and for the life of me could not get the front or rear corners to fit the fender lip like they were supposed to. They were a bear trying to tuck in at all. Once I forced them somewhat into place, none of the holes lined up as I have read mentioned in some of the reviews here. After wrestling the corners back out, I found out why. Husky did an extremely poor job of removing the molding flash after demolding. Working in the plastics industry, I know all about this. As you can see in the pictures, there was well over 1/4 of thick flash remaining past the trim line on both liners. A quick look at the passenger side showed thick flash remaining on over 75% of the edge. If you do not take a utility knife and cut all of this off, your have next to no chance of these fitting correctly. The trim line is easy to see and the material trims away easily. You can see in the last photo just how much flash I had to trim from the passenger side. Once these are trimmed down to the shape that they are designed to be, they fit snugly and exactly as they are supposed to, with all screw holes lining up. They look very nice on the truck once installed. I only wish that I had noticed the terrible factory deflash job before having to fight the driver side in, try to make it fit as it came out of the box and then wrestle it back out to trim it down.

The Husky Liners Rear Wheel Well Guards came shipped as a pair with simple, easy to follow instructions. Installation was (1 person) easy and required will wrestling to line up the holes. Once installed, the look is much improved. Recommend hosing down the wheel wells prior to installation to remove any potential dirt or grit. Now, clean-up of the wheel wells simple require a quick blast from the hose or pressure washer. Definitely Jake Jacobs approved.

These wheel lines do the trick when after the pain of getting them in. If you have mud flaps installed then they must be removed first. Gettin the end to tuck in behind the fender lip and lined up is the biggest pain. When they are finally in all the mounting holes and hardware line up almost exactly. Very pleased with them, makes cleaning under the fenders much easier.

Decided on these over both the OEM and another popular competitor's brand after reading reviews, forums, and a couple of YouTube videos. They're definitely a solid piece of plastic, and I mean solid as in it would take some serious road debris to get through these. Pros **** 'I'd say easy installation, but definitely not effortless. 'Liked that I didn't have to remove my OE flare plastic push clips, and the use of four existing mounting points for the screws and retaining clips was more then enough to hold these in place. 'Great coverage of the entire wheel well including the frame EXCEPT for a bit of relief over the top of the wheel arch itself. 'Great, finished look to the back of the truck. Cons **** 'Sharp edges when you're pressing the wheel arch into the fender! Ouch! 'The liner doesn't cover about 1-1.5 of the wheel well over the wheel arch. I suspect this is just due to design and being able to make installation easier, but don't be shocked that you'll have a gap there between your liner and the fender aluminum. Other Notes *********** 'Pressing the edges of the liner onto the metal wheel arch was a PITA, especially at the bottoms where the attachment screws go. I found it easiest to get the fronts in by removing the 10mm bolt from the OE flare so I could flex the flare out of the way enough to jam the liner into place. 'Instructions only indicate to make sure the liner is pressed in over the metal lip of the wheel arch, but they don't specify if it should be in front of or behind the plastic push pins for the flares. Due to fitment in some places, I couldn't get the liners to stay pressed into the wheel arch unless I forced it behind those plastic pins. 'Might be because of the liner behind behind the plastic push pins, but the OE flares on both sides shifted about 1/16 rearward when I was done. 'Don't even screw in the first two inner well screws like the instructions state. Install the retaining clips, but leave all the screws out until you get the whole liner pressed properly into place. At that point you should be able to push on the liner at each mounting location and the holes should line up. Results my vary, but my liners were warped from storage/shipping just enough that putting in those first two screws and then trying to maneuver the rest of it would have been impossible.

I was impressed with the quality of this liners. The fit was great and the installation was straight forward and don't need to lift the vehicle.

pleased with this purchase. driver's side was a challenge and ended up poking a new hole, although i probably could have made it work with the existing holes.

Installation was smooth and quite easy. Fit was good and I had no issues getting the pre-drilled holes to line-up. Stage 3 Motorsports has some of the best prices around and are great to do business with!

The wheel liners and well built. I don't know why Ford doesn't install wheel liners from the factory. Solid structure, because of the rigidity they are all little tough to install by yourself. Have some lights handy so you can see what you are doing and you'll be fine, just have to get the holes to line up and be ready with your drill when they do. Should be very nice in the winter to prevent salt / snow / ice from building up along the truck bed. Very satisfied with my purchase.

Good quality product. Install was straight forward and fairly easy.

Great addition to complete a finished look to truck,As well as functional in keeping un-wanted road dirt and crud from under carriage of truck. Installation tip: In my opinion heat either solar or by heat gun, hair dryer etc. is self defeating. although it makes the material more pliable, the coefficient of expansion is greater than the truck body components. The fit on these liners by the way is excellent. a great product.

Talk about a simple installation to give your truck a front to back finished look. These things are great! Most everyone thinks the truck came from the factory like this. You won't regret buying them. I also need to give a shout out to Stage3Motorsports. From product availability/pricing to customer satisifaction, they are on top off their game. THANKS!

First the good. These look great and after a few snowfalls I am thankful I purchased them. Snow and slush falls right out of the wheel wells. Its also adds a nice finished look to the truck. Now the not so good. I watched several installation videos on this product. All made the install look simple. It was anything but. It took me quite some time bending and nudging these into place, it was very frustrating to say the least. On the drivers side all the mounting holes lined up fine once the guard was in place. On the passenger side only one hole lined up. The two frame screw holes were off by just enough that again my frustration was overwhelming. I did get them in though and its done. I would highly recommend the guards but caution that the install may not go as easy as it does in the videos. I have taken one star off for the less than easy install.

Fit issues with the holes lining up was a pain to deal with. Took a bunch of tugging and pulling to get the holes in the correct position. Took 1 hr for something which should take 15 minutes. Does look good once completed.

Passenger side fit poorly.Not enough liner to stay under fender lip. No way to move around to make it fit. Not happy.

It took me about 15 mins to install the wheel well guards. The instructions were simple to follow and the fitment was perfect. I did leave them in the truck bed for about 15 min in the sun while I read the instructions. This made them a bit more pliable and easy to manipulate when tucking them behind the quarter panel. I'm extremely satisfied with the purchase. They make a subtle difference in how the truck looks and I look forward to not rinsing mud out from under the truck bed and wheel wells.

Purchased Bilstein 5100 front and rear shocks. Never liked looking at rear, inside frame of truck. With new NITTO RIDGE GRAPPLERS and BLACK RHINO RIMS, Husky Rear Wheel Well Guards was a must! This was what I expected, and its looks finished! BEST PRICE! FREE SHIPPING! THANKS STAGE 3!

Quick install once I removed my weather tech mudflaps. Look great, cover alot. Put my mudflaps back on after, should be ready for a Pennsylvania winter now. And as always, super quick shipment from Stage 3 Motorsports

Easy install. Fit was good overall. No bolts came with it like in the video. I had some clips from a previous project I used to secure. Took one star off for not have bolts in box.

Quick shipping, easy to install - functional, clean looking, must have !!

Easy to install looks good

Wheel well guards shipped quickly. The installation only took a few minutes, and was fairly easy. Very pleased with the fit and look.

Good Fit, great price. Do what they are supposed to. Not sure why Ford doesnt do this automatically...or maybe I am sure, but Husky makes it easy and affordable to get it done.

Fit perfectly and installed in 15 mins. It takes a bit of effort to bend the outside edges to get them behind the fender, but once you manage it, install is simple. All holes lined up on my truck perfectly, and no trimming was required.

Glad I finally bought these, straightforward easy install. Takes a little effort popping them in, recommend getting the front pushed in first. Make the truck look so much better.

Fits perfectly, install was very quick and can be done by one person with basically a screw driver. Just take your time to line it up correctly. Clean the wheel well prior to installation.

Husky Liners are easy to install and make the truck look great. I highly recommend Husky products. Stage 3 Motor Sports had the best price and shipped the products free and fast. 5 Stars for the product and Stage 3!

I'm not sure what everyone was talking about, these installed in about 15 minutes with no issues. The holes lined up great. Ford should have included these from the factory. Highly recommend.

Great liners, e-z instalation, looks fantastic, keeps debris were it belong, out from under the bed. A best value for the price

Easy Install! All holes lined up well. Installed w/o removing my Husky Mud flaps. Upon receiving my truck I coated the fender-well with a rubberized coating that peeled off, should have done this. One day delivery from Stage 3!

Great product and quick, easy install. Took about 20 minutes with no drilling or modification needed.

Great product with lots of coverage. Installed both sides in less then 30 minutes. Stage 3 Motorsports has been my go to site for my new F150. Customer service has been second to none.

Awesome product, great fitment, installed with the wheels still on in under 20 minutes. Makes the back end of the truck look much better!

I was hesitant to purchase these after reading other reviews that said mounting holes did not line up correctly. Husky must have fixed that issue, because these fit my truck perfectly. They were easy to install and give the rear wheel wells a much cleaner look. Stage 3's pricing and shipping speed were also a plus.

Once you get them mounted the look and fit is super, they are just a bit hard to get the holes to like up, it defiantly takes some muscle to do, but it's worth the hassle

Perfect fit looks awesome easy to instal I recommend it highly!

Shipped fast, the install is kind of pain, it's not to bad, however, getting the edges and the bottom corners in are pretty tough but once theyre in I cant see them coming out for any reason. These should have been factory, they cover so much and are super easy to clean off, litterally just rinse them off and they trap so much crap from getting on the inside of the fenders. If you can get past the install (which really isnt that bad, just takes a little muscle and patience) then it'll be worth it. Great product that I will be buying for my other trucks, I would buy them again.

Definitely worth the purchase. Better then stock and a cleaner look.

Tight fit, but, went in as expected and look sharp, no issues with installation. Like the look.

These are great to give the truck a finished look. Took all of 5 mins per side to install. Not sure what difficulties some were having. I like these better than the Ford liners as these cover the small portion of frame and bed a bit better. These will cove the shock body some if you go with an aftermarket shock with boot on the bottom.

Product did not come with mounting hardware. I used one way clip retainers as fasteners that I already had. Bought that from amazon for 20$ and worth every penny. Used some basic hand tools to fight the liners into place. Install took about 25 minutes with trips to get tools. I was going to give 4 star because I didn’t get any hardware in my box, but I am really happy with the product. Very easy to clean. Looks nice compared to the uncovered wheel wells. Understand that your fingers are gonna get a work out. These are heavy duty liners. Happy with the results!

Great product. Install took 15 mins. Perfect fit! These clean uo the rear of the truck.....plus add protection. These are better than the Ford liners.

Great quality, easy to install and looks great on truck. These are what the manufacturer should have put on the truck. Very clean look.

Simple yet effective. That's these wheel well liners in 3 words. Really does make the truck look better, and makes it easier to clean up the mud/dirt/sand/whatever after the fun is done for the day. One minor bit of advice I have for those clip on "nuts" that are included. When you put the forward most ones on (in front of the tire, on the wheel arch) instead of sliding on from inside --> out, go outside --> in. It makes it a lot easier to line up the holes so you can get the screw started. That's literally the only thing I had a problem with and I didn't figure it out until I did the opposite side.

Very pleased with these liners. They are super easy to install and provide great coverage. I highly recommend this product.

They are very durable and I like how it covers the gap. Definitely recommend. There is no need to remove the wheels, even with larger tires. The only reason I didn't give it 5 stars is because after easily installing the driver side, I needed assistance on the passenger side. The holes on the well guard didn't match the holes on the truck. Still made it work and happy with the look.

Did not just slap in with ease as the videos had shown after fighting with it for over 30 minutes I trimmed 1/4 inch off the outer side of each and then they snapped right in, do your self a favor and remove the wheels first too.

Arrived fast and very simple install. Definitely looks better and cleans up much easier. Better protection now for the gravel roads up north.

Install of easy and they look great. They should come from the factory this way.

I had never heard of this product before I seen them here. Super simple install and awesome product, I will never have a truck without these going forward.

Look great! Easy install.

Husky wheel well liners are heavy duty, a bit tricky to install (requires a little patience and strong fingers), but the result is certainly worth the effort. Very good looking after install.

Easily installed in about 30 minutes and fits like a glove. 10mm socket is all you need and they look great. Very satisfied with purchase.