2007-2014 Mustang GT500 RAM Force 10.5" Dual Disc 900-Series Clutch Kit 80-2220N

High-Performance RAM Clutch w/ 900-Series Disc

One of the best upgrades you can add to a high-performance GT500 Mustang that is generating a ton of extra torque and horsepower is an upgraded clutch. Depending on how much more torque and horsepower you've added is the real key though. You want to add on a clutch that can meet you at the right performance range or else you're not going to strike the right balance of control and power. Their metallic facings ensure smooth engagement on takeoff and a long service life. RAM Force 10.5 900 Series feature a street-friendly twin-plate clutch to provide better low-speed driveability. If you're bolting on a larger blower or turbo system, Force 10.5 900-Series twin-plate clutch kits might be the best choice for you. Ram's 10.5 Dual Disc Clutches instantly allow you to shift easier and provide an overall improvement of your drivetrain's ability to handle lots of power and perform reliably.

Holds An Increased Amount Of Torque For Increased Launching Off The Line

This Bad-Boy clutch from RAM is capable of holding up to 1300 ft./lb. of torque and comes with a metallic friction disc that easily shrugs off hard launches and high-rpm drops off the line. This RAM clutch uses a stand-driven floater plate, which provides higher torque capacity and negative load capacity for vehicles that see more use at the track. It uses a 2400 pound clamp load pressure plate for good holding power without excessive pedal effort, and features a 900-Series sprung hub top disc and solid hub bottom disc for smooth engagement.

Fits The Following Models: 2007-2014 Ford Mustang Shelby GT500.

Included In Kit:

• High Clamp Pressure Plate
• Dual-Disc Assembly
  
• Flywheel
  

Clutch Details:

• 10.5" Inch Diameter
• 26 Spline
• 1.125" Input Shaft Diameter
• 26-spline
• 8 Bolt
• 900 Series Disc

Recommended For The Following Driving Conditions:

• Drag Racing
• Drift
• Road Race
• Autocross
• Rally

This clutch kit will also REQUIRE RAM's Upgraded Throwout Bearing & Slave Cylinder Kit for proper operation.