- Huge improvement in stopping power and fade resistance
- Features four zinc-plated drilled & slotted rotors and full set of pads
- Slotted surface clears dust a debris for consistent braking
- Drilled holes allow heat to escape the rotor surface
- Low-dust brake pads with more stopping power than stock
- Drop-in replacements for stock
Complete Performance Braking Overhaul
The stock brake rotors and pads on your 2007-2010 F250 or F350 were never much to write home about, so why not replace them with StopTech's Select Sport Axle-Pack and give your Super Duty the stopping power it really needs and deserves. This total brake system overhaul replaces all four of your factory blank brake rotors with StopTech Select Sport Drilled & Slotted Rotors and pairs them up with a full set of their Select Street performance brake pads which work together to provide your F250 or F350 with more bite, less fade, and more consistent braking performance, even when you're towing or hauling heavy loads. The StopTech Select Sport Axle-Pack Kit is your truck's one-stop shop for a wonderful braking overhaul.
Drilled & Slotted Select Sport Series Rotors with E-Coated Hats, Vanes, and Sides
The heart of StopTech's Street Axle-Pack Kit is its Sport Drilled & Slotted Rotors. Each premium rotor casting is finished in a zinc plating for corrosion-resistance and dependability, and are mill-balanced for smooth, consistent stopping. The contact patch of each rotor features precisely machined slots that help clear away brake dust, gasses, and other debris away from the pads so that your truck gets consistent braking under practically any condition. The drilled holes allow heat to escape down into the rotor's vanes, allowing for vastly improved dissipation over stock blanks.
Full Set of StopTech Street Pads for Low-Dust Performance
Further improving stopping power is a full set of StopTech Street Select brake pads. StopTech's Street Select pads were carefully designed to improve braking performance on street-driven trucks, all while being easy on your rotors and generating extremely low levels of brake dust. StopTech's pads drop right into your F250 or F350's factory brake calipers and come installed with premium multi-layer shims, plus other high-quality hardware for consistently quiet operation. The pads feature a positive molded design and chamfered edges that provide excellent braking consistency and linear engagement with the rotor's contact patch. The pads are thermal-scorched to make bedding them in that much easier, and come with everything you need for installation in your truck's stock calipers. Fitment
- 2007-2010 Ford F250 Super Duty 4WD
- 2007-2010 Ford F350 Super Duty 4WD - Single Rear Wheel Axle Only
Rotor Size: Factory stock 13.66" front and 13.39" rear replacements.
Bed-In Note: the rotors and pads will require bedding in before general use. Please follow StopTech's bed-in instructions included with your brake kit.