2010-2011 F150 StopTech Front & Rear Drilled & Slotted Street Axle-Pack Brake Kit 935.65043

Highlights:

• Huge improvement in stopping power and fade resistance
• Features four drilled & slotted rotors and full set of pads
• High-density cast iron rotors with e-coated hubs and vanes
• Slotted surface clears dust a debris for consistent braking
• Drilled holes allow heat to escape the rotor surface
• Low-dust brake pads with more stopping power than stock
• Drop-in replacements for stock

Performance Overhaul of your F150's Wearable Braking Components

The stock brake rotors and pads on your 2010-2011 F150 were never much to write home about, so why not replace them with StopTech's Complete Front & Rear Drilled & Slotted Street Axle-Pack Kit and give your F150 the stopping power it really deserves. This total brake system overhaul replaces all four of your factory blank brake rotors with StopTech Sport Drilled & Slotted Rotors and pairs them up with a full set of their Street performance brake pads which work together to provide your F150 with more bite, less fade, and more consistent braking performance, even when you're towing or hauling heavy loads. The StopTech Street Axle-Pack Kit is your F150's one-stop-shop for a wonderful braking overhaul.

Drilled & Slotted Sport Series Rotors with E-Coated Hats, Vanes, and Sides

The heart of StopTech's Street Axle-Pack Kit is its Sport Drilled & Slotted Rotors. Each rotor is made out of a special cast iron blend with high levels of carbon and molybdenum that's cooled for a specific rate during production to get excellent levels of tensile strength and hardness. The contact patch of each rotor features precisely machined slots that help clear away brake dust, gasses, and other debris away from the pads so that your truck gets consistent braking under practically any condition. The drilled holes allow heat to escape down into the rotor's vanes, allowing for vastly improved dissipation over stock blanks. The hat, sides, and vanes of each rotor feature a black e-coat finish that helps the entire rotor resist corrosion much better than stock blanks or other raw iron rotors. The E-coat finish can withstand up to 400 hours of salt water immersion, making them perfect for use in areas with heavy road salt.

Full Set of StopTech Street Pads for Low-Dust Performance

Further improving stopping power is a full set of StopTech Street brake pads. StopTech's Street Pads were carefully designed to improve braking performance on street-driven trucks, all while being easy on your rotors and generating extremely low levels of brake dust. StopTech's pads drop right into your F150's factory brake calipers and come with new shims and other hardware so that you get quiet and consistent operation. The pads feature a positive molded design and chamfered edges that provide excellent braking consistency and linear engagement with the rotor's contact patch. The pads are thermal-scorched to make bedding them in that much easier, and come with everything you need for installation in your truck's stock calipers.

Fitment:

• 2010-2011 F150 6-Lug
• 2010-2011 SVT Raptor

Bed-In Note: the rotors and pads will require bedding in before general use. Please follow StopTech's bed-in instructions included with your brake kit.