- Smooths out ride and adds travel and strength
- Set of 11 progressive leaf springs in single packs
- Deletes rear block and adds 1" of ride height
- Diamond-cut ends, anti-friction pads, and military wrapped eyes
- Comes with U-bolts, bushings, and eye bolts
Adds Travel, Smooths Out Ride, and Can Handle Aggressive Off-Roading
The stock leaf springs on your 2010-2014 Raptor may be a tough off-road machine, but there's still plenty of room for improvement when it comes to both travel and strength. Deaver's complete 1" Lift Leaf Springs are built incredibly tough and increase rear suspension travel thanks to their progressive design. Deaver's leaf springs feature a pack of 11 leafs that are thinner than stock that generates a smoother spring rate and compression curve that helps smooth out ride quality both on and off the road. The springs use Military-wrapped eyelets for improved strength over stock, allowing you to use your Raptor to its full potential off-road. The springs delete your Raptor's factory rear block and install directly onto your Raptor's rear axle and add 1" of rear lift over stock that can help support bed racks or give you back some rake for towing and hauling after a level.
American Made 5160 Steel Leafs with Diamond-Cut Ends and Military Wrap Front Mount
Deaver's Raptor leaf springs are built incredibly strong and come with everything you need to get them installed on your Raptor. The springs are built out of American-Made 5160 spring steel with diamond-cut ends and anti-friction pads between the leafs. Each spring features a military wrap around each eye mount that provides much greater strength than the factory single-wrap setup. The leaf packs feature bolt-through retaining clops that hold the leaf springs together through even the most extreme off-road abuse. Each set of leaf springs comes with a complete U-bolt kit, high-quality bushings for the eyes, and new eye bolts that work together to allow for a seamless installation onto your Raptor without the need to hunt down custom hardware.
Eye Bolt Note:
- 2010-2014 SVT Raptor
- 2009-2014 F150
you will likely need to cut off the factory eye bolt on the driver's side in order to install these springs, due to its awkward positioning next to the fuel tank. Please use a cut-off wheel and not a torch for obvious reasons.
Standard F150 Fitment:
these leaf springs will bolt up to standard F150s without any issues. However, you will gain slightly more ride height than what these springs are rated for on the Raptors.
Many of high-quality performance parts and accessories require freight shipping due to their size, bulk, or manufacturer's preferences. Freight shipping is only available to the Continental United States (AK, HI, Puerto Rico, etc. are not able to order items that ship via freight service). It takes roughly one to three days for Stage 3 to process a freight order and carefully prepare your order for transit. After our freight carrier picks up the product, a Stage 3 representative will email you tracking information for your order.
Once your shipment has arrived in your general area, the freight carrier will contact you to schedule the actual delivery. Most freight companies can only schedule for a particular day and not a specific time, because of their volume of deliveries.
After your order is delivered, it is extremely important to completely inspect your package and items for damage before signing the Bill of Lading while the delivery personnel are still there. You are solely responsible for thoroughly inspecting your items before signing any documentation. Carefully note any damage to your items or anything unusual on the Bill of Lading. Keep a copy of your papers and contact Stage 3 immediately if there is any damage or irregularities. Damage caused by transportation qualifies you for a refund and/or replacement only if any and all damage is properly documented on the Bill of Lading.
Please keep all of the item's original packaging for up to 30 days in case your product needs to be returned. All damage claims will need to be processed by our Returns Department and require clear photographs of the damage to your parts.
Some of our products are so large that they require the use of a lift gate or dock to effectively unload. Unfortunately, we can only offer free shipping to business addresses with those products. All orders that contain products that require a business address for free shipping will be checked, and if a residential address has been selected as the shipping address, that order will be held until we contact you to either change the address or elicit further payment for delivery to a residential address.
Contact Stage 3 Motorsports or check out our standard shipping policy if you have any additional questions or concerns.