2019-2025 Ford Ranger Auto Spring Rear Add-a-Leaf Kit | RAAL

Name: 2019-2025 Ranger Auto Spring Rear Add-a-Leaf Kit
Brand: Auto Spring
SKU: RAAL
Price: 350.00 USD
Availability: InStock

2019-2025 Ranger Auto Spring Rear Add-a-Leaf Kit

SKU RAAL

5 Review(s)

$350.00

0 in stock Ships From Manufacturer. Average Time To Ship Is 2-3 Business Days

Free shipping included

60-day returns on most items

Earn reward points with this purchase

7 Customer Q&A(s)

Write a Review

Highlights:

Add rear ride height and improve carrying capacity
Includes two high-strength steel leafs with adapter pins
Adds 1.5" to 2" of rear ride height after settling
Great for towing applications on leveled or lifted trucks
Drop right into the factory leaf packs
Can reuse stock U-bolts

Increase Rear Ride Height and Towing Capacity for your Ranger

Are you sick of seeing your 2019-2025 Ford Ranger sag in the rear after you put in that fancy new leveling kit in the front? This isn't going to help if you plan on towing and Auto Spring has the solution with their high-quality Add-a-Leaf kit for the Ranger. This pair of leaf springs install directly into your truck's stock leaf pack without any drilling, cutting or trimming, and add up to 750lbs of load capacity to your truck. The Ranger Auto Spring Add-a-Leafs are also capable of increasing rear ride height by up to 1.5" to 2", giving your truck an aggressive look while helping keep your Ranger level when you're towing or hauling all of your gear. The Auto Spring Add-a-Leaf Kit are perfect compliments to 2" leveling kits or coilovers, giving your Ford a mean look while letting you fit on proper-sized off-road tires.

High-Strength Leaf Springs That Reuse the Stock U-Bolts

Each one Auto Spring's Ranger Add-a-Leaf Kits comes with a pair of high-quality leaf springs, new pins, and installation instructions. The springs are manufactured out of extremely strong, US-sourced 5160 tempered spring steel that allows them to hold up to just about any application that you have in mind. The springs also have Teflon pads on each end which reduce NVH and help prevent squeaking during break-in. The springs install directly into your truck's factory leaf pack and are completely compatible with your Ranger's factory U-bolts and rear shocks for most applications. Auto Spring includes a set of four new Grade 5 adapter pins for installation.

Write a Review

2020 Ford Ranger

Easy install, only needing some hand tools (though an impact helps reduce time). Provided a much needed rear lift after Icon Stage 2 Coilover install.

2019-2025 Ranger Auto Spring Rear Add-a-Leaf Kit Review Image!

Did you find this helpful? 11 of 11 Found Helpful

Reviewed by: (Verified Buyer) Christopher T Tillman from Aurora on 6/10/2020

2020 Ford Ranger

The springs are of good quality, and easy install. The only downfall of these springs is they don't have the alignment hole. Instructions say to remove the factory alignment pin. The result is the spring twists once driving. I purchased brackets to fix this.

Did you find this helpful? 3 of 3 Found Helpful

Reviewed by: ALAN D FERNANDEZ from Richlands on 1/28/2021

2019 ranger fx4

Easy install, however, I did need longer u bolts

Did you find this helpful? 2 of 2 Found Helpful

Reviewed by: William Jacobs from Las Vegas on 1/29/2021

2019 Ford Ranger XLT

With the canopy, and the bed loaded fully, and the trailer loaded fully (about 4000 lbs and about 300 lb or so tongue weight) The frame was on the axle. With this leaf, it now has a little room before it even hits the overload.

Did you find this helpful?

Reviewed by: Mark from Beaverton on 7/27/2022

2019 Ford Ranger FX4

Easy to install however, I did need longer u bolts

Did you find this helpful?

Reviewed by: William from Las vegas on 1/27/2021

Will these work with the Ranger Tremor?

Asked by: Steve - 4/13/2024

Yes, this add a leaf will work on the Tremor trimmed Ranger as well.

Was this answer helpful? 1 of 1 Found Helpful.

Answer provided by: Joel Galaz (4/15/2024)

Submit an answer

There seem to be some different answers and customer reviews related to u-bolts and the center pin. Do these come with everything you need to install, or do you need additional hardware? Also, will they work with the Ranger Tremor model?

Asked by: Kevin - 4/27/2023

These come with a set of longer alignment pins and do allow you to reuse the factory u-bolts if you choose not to replace them.

Was this answer helpful? 0 of 0 Found Helpful.

Answer provided by: Joel Galaz (10/11/2023)

Submit an answer

Will this make the rear a really stiff ride

Asked by: John - 8/17/2021

In general, add-a-leafs do add a bit of stiffness to rear end ride quality, though a lot of that can be mitigated with aftermarket rear shocks. That being said, if you are concerned about maintaining your truck's ride quality, you may want to go with another method of lifting your truck's rear end or getting load support. Your best bet would be to call us directly at 623-434-5277 or email us at [email protected].

Was this answer helpful? 1 of 1 Found Helpful.

Answer provided by: Jason@Stage3 (8/18/2021)

Submit an answer

Do these add any height?

Asked by: damon magenau - 3/29/2021

These add-a-leafs add 1.5" to 2" of ride height after settling depending on the condition of the stock leaf packs and rear suspension in general.

Was this answer helpful? 1 of 1 Found Helpful.

Answer provided by: Jason@Stage3 (3/30/2021)

Submit an answer

Will these address the driver side lean that these tracks inherently have?

Asked by: MontanaPilot - 3/7/2021

They'll help to some extent, since they handle load better than stock, but the real issue is that the Rangers just have a lot of their weight on the driver's side, especially with the fuel tank over there.

Was this answer helpful? 1 of 1 Found Helpful.

Answer provided by: Jason@Stage3 (3/8/2021)

Submit an answer

Since this ships directly from Auto Spring, will things work out if I specify the 1-1 1/2" spring rather than the advertised 1 1/2-2" spring in the comments of my order? I want to beef up the back in terms of load offset (600 lbs) but not add much more lift

Asked by: ProtonDeday - 12/7/2020

This particular part number is only meant for the 1.5" to 2" springs. In general, it's tough to get an add-a-leaf to set your truck at a specific ride height, but if you want to custom order an add-a-leaf or looking into possibly doing a complete leaf pack, give us a call directly at 623-434-5277 or email us at [email protected].

Was this answer helpful? 2 of 2 Found Helpful.

Answer provided by: Jason@Stage3 (12/8/2020)

Submit an answer

My 2020 Ford Ranger XLT SPORTS PAK ; payload1585; IM GOING to PUT A TRAVEL LITE TRUCK CAMPER ON IT (1185 lbs) . To get a couple hundred pounds extra payload for gear and supplies. Adds up quick!! Is the Ranger equipped to fit additional springs ?

Asked by: Joe - 11/29/2020

The add-a-leaf kit won't increase your truck's stated/rated payload, GVWR, or GCWR capacities, but they will help you support more load without the rear end squatting to the point where you get drivability issues. The Rangers accept this add-a-leaf kit and reuse the factory U-bolts.

Was this answer helpful? 3 of 3 Found Helpful.

Answer provided by: Jason@Stage3 (11/30/2020)

Submit an answer

Have Questions?

Stage 3 Rewards is our free customer loyalty program. Earn points on every order and redeem for cash off your next purchase.

100 bonus points just for signing up ($2 to start)
1 point per dollar spent on every order (2% back)
Bonus points for reviews, birthdays, and social shares
Redeem for $10, $20, $30, $50, or $100 off coupons

See full program details

WARNING: Cancer and Reproductive Harm

This product can expose you to chemicals including those known to the State of California to cause cancer and birth defects or other reproductive harm.

For more information, visit [www.p65warnings.ca.gov](https://www.p65warnings.ca.gov).

2019-2025 Ford Ranger Auto Spring Rear Add-a-Leaf Kit | RAAL

Increase Rear Ride Height and Towing Capacity for your Ranger

High-Strength Leaf Springs That Reuse the Stock U-Bolts

Will these work with the Ranger Tremor?

There seem to be some different answers and customer reviews related to u-bolts and the center pin. Do these come with everything you need to install, or do you need additional hardware? Also, will they work with the Ranger Tremor model?

Will this make the rear a really stiff ride

Do these add any height?

Will these address the driver side lean that these tracks inherently have?

Since this ships directly from Auto Spring, will things work out if I specify the 1-1 1/2" spring rather than the advertised 1 1/2-2" spring in the comments of my order? I want to beef up the back in terms of load offset (600 lbs) but not add much more lift

My 2020 Ford Ranger XLT SPORTS PAK ; payload1585; IM GOING to PUT A TRAVEL LITE TRUCK CAMPER ON IT (1185 lbs) . To get a couple hundred pounds extra payload for gear and supplies. Adds up quick!! Is the Ranger equipped to fit additional springs ?

Pick Up Where You Left Off