2023 Ford F250 & F350 4WD Diesel BDS Rear 5 inch Lift Kit NX2 Shocks Leaf Springs with Radius Arm | Part# BDS2208H

• Heavy-duty while maximizing ground clearance
• Pro-ride dual rate coil springs for any terrain
• Heavy-duty tubular steel radius arms for maximizes ground clearance
• Easy bolt-on installation
• Vehicle-specific valving for better control
• Maximum performance for on or off-road

Upgrade To Get Smoother Drives

Improves Your Rig's Power and Performance

Tire and Wheel Note:

• 37 x 12.5 with 17 x 9 and 5 in. Backspace
• 37 x 12.5 with 18 x 9 and 5 in. Backspace
• 37 x 12.5 with 20 x 9 and 5 in. Backspace

Specs:

• Front Lift: Coil Spring
• Rear Lift: Leaf Spring
• Shocks Included: Yes
• Front Lift Height: 5 inch
• Rear Lift Height: 4 inch

NX2 Nitro Series Features:

• Nitrogen-charged
• Twin-tube design
• 10-stage velocity-sensitive valving
• Dual-welded ends for increased strength
• 1-3/8-inch high-flow piston
• Self-lubricating seals
• Silver powder coat finish

Vehicle Fitment: 2023 Ford F250/F350 SuperDuty 4WD

Note: This kit is not compatible with trucks equipped with radius arm mounted ride height sensors.

Note: Ford recommends the replacement of the pitman arm nut after each time it has been removed.

Note: Use a small pitman arm puller to remove the drag link joint and steering stabilizer taper.

Note: If your truck is equipped with a 2-piece rear driveshaft, a Carrier Bearing Drop Kit may be required: BDS123402.

Note: Larger tires on stock wheel are not recommended due to interference with brake line, radius arm and sway bar. Use recommended specs listed in wheel and tire note section.

Note: Due to the taller factory ride height, Tremor models will not net full advertised lift height. Final ride height will be the same as standard models.

Note: Installation requires a torque wrench capable of 406 ft-lbs.

Note: Trucks without top mounted overload springs will require (4) UBT4028.