2009-2013 Ford F150 4WD Bilstein 6112 Stage 1 Suspension Package BIL61120913S1

Highlights:

• Big-time handling and performance improvement
• Great for both on and off-road handling
• Pair of front Bilstein 6112s and rear 5100s
• Gas-charged monotube internal designs
• High-strength steel bodies with corrosion-resistant finish
• Front assemblies feature adjustable ride height with up to 2" of leveling
• Drop-in replacements for stock
• Not recommended for 3.7L V6 F150s

Huge Improvement in Off-Road Performance and On-Road Handling at a Low Cost

Getting awesome handling ans suspension performance both on and off-road doesn't mean you have to drop a huge chunk of change on a true coilover kit. All you really need is our very own Bilstein 6112 Stage 1 Suspension Package. This awesome package includes a pair of 6112 front coilover assemblies that are capable of adding up to 2" of ride height to your truck, as well as a pair of Bilstein 5100 rear shocks that improve rear end handling and control while being able to handle about 1" of ride height over stock. The 6112 Suspension package is a great way to make your 2009-2013 F150 into an off-road ready without blowing your entire budget on suspension.

Pair of 60mm Strut Assemblies with Adjustable Ride Height and New Coil Spring

The Bilstein 6112 coilover assemblies offer up excellent levels of performance in a package that's far less expensive than a true coilover kit. The 6112s feature a large-diameter shock body with a gas-charged monotube internal design with with digressive valving that allows them to absorb large and violent impacts that you find off the beaten path. The large 60mm diameter (2.36") shock body holds a huge reservoir of oil that helps these shock assemblies resist fade even during aggressive and consistent articulation. The 6112s come standard with a new Bilstein coil spring and a billet lower perch. The 6112s reuse your truck's stock upper mounts and hardware to help provide them with a perfect fit. The 6112s have an adjustable snap ring for adjusting ride height and have 0", .5", 1", 1.5", or 2" ride height settings.

Two Bilstein 5100 Monotube Shocks for Big Handling and Performance Gains on your Truck's Rear

The two Bilstein 5100 rear shocks included in this package serve as awesome general-purpose upgrades over the factory rear shocks. The 5100 rear shocks clean up your F150's rear handling both on the road and off, helping prevent bounce and jounce after bumps in the road while also being able to handle more violent impacts off-road. The 5100s feature a gas-charged monotube internal design with self-adjusting deflective disc valving that gives them a great ride and excellent all-around performance. The 5100s are built out of heavy-duty steel and come with a zinc plated and Triple-C finish to help prevent corrosion. Each shocks comes with a black boot and OE-style rubber bushings.

Fitment: 2009, 2010, 2011, 2012, 2013 F150 4WD

Not recommended for 3.7L F150s: this kit is not recommended for use on 2011, 2012, 2013 F150s with a 3.7L V6, due to their lighter curb weight and the ride height they gain from the front 6112s.

Kit Returns: unfortunately, we will no longer be accepting partial returns of this package except in cases of damaged or defective parts. Please be aware of the installation requirements of this kit and plan accordingly. Please give us a call directly at 623-434-5277 if you need more information.