2009-2018 Ford F150 & Raptor Alcon 4-Piston Rear Big Brake Kit | Part# BKR5059D07

Highlights:

• Vast improvement in stopping power and fade resistance
• Large 4-piston calipers with 13/6" rotors
• Ductile iron calipers with corrosion-resistant finish
• Pistons with motorsports-grade high-temp seals
• Compatible with factory wheels and tires
• Require newer parking brake assembly on 2009-2011 F150s

Adds Huge Stopping Power and Reduces Fade Over Stock

When it comes to adding utterly massive stopping power to your 2009-2018 F150 or Raptor, you can trust Alcon's 4-Piston Rear Big Brake Kit to get the job done. Alcon's brake kit comes with massive, heavy-duty calipers loaded with four pistons that provide huge levels of clamping force. Helping the calipers bring your ferocious truck to a quick stop are 360x32mm (14.17x1.26") rotors with a unique slot design that provide a significant drop in fade while helping to improve stopping power and braking consistency over stock. Best of all, the calipers feature a low-profile design, which allows them to fit behind the factory 17" wheels of 2010-2017 Raptors, as well as stock 18" and 20" wheels of standard F150s. Alcon's rear 4-piston brake kit is a great choice for getting the stopping power your aggressive truck deserves.

Powerful Ductile Iron Calipers with High-Temp Seals

Alcon's 4-Piston Calipers were carefully designed to provide excellent fitment, while producing the enormous stopping power that aggressive trucks need both on and off-road. Unlike a lot of their competition, Alcon manufactures their calipers out of heavy-duty ductile iron which is less prone to deflection when under high heat and load than aluminum calipers. Alcon uses an acid zinc finish and epoxy acrylic paint over the entire caliper to prevent corrosion and give each caliper a great look. All four pistons of each caliper are fitted with motorsport-grade high-temperature seals, as well as a wiper seal to help prevent debris and dust from entering the piston shafts. Alcon's calipers come fitted with high-friction brake pads that are designed specifically for Alcon's calipers. The calipers work with the stock brake lines and stock-replacement brake line kits. Alcon's rotors feature a one-piece design and have a higher thermal mass than stock to help reduce fade when under load. Their unique u-shaped slots help clear away dust and debris for improved consistency.

2009-2011 F150 Fitment:Standard (non-Raptor) 2009, 2010, 2011 F150s will require OEM 2015, 2016, 2017 F150 parking brake assemblies for proper fitment of this kit. The part numbers required are CL3Z-2210-C and CL3Z-2209-C, which can be found at your local Ford dealer.

Wheel Fitment: this brake kit will fit factory wheels and wheels with similar spoke designs and backspacing. The calipers will not clear wheels with low or extreme negative offsets. Please download and use Alcon's Clearance Guide to ensure your wheels will work with Alcon's brake kit.