Aeroforce Interceptor Ford CNF Series Dual Digital Gauge Kit CNF202

Aeroforce Interceptor Ford CNF Dual Gauge

We price match! Call 623-434-5277!

Part#:

AF-DUAL-CNF

3 Review(s) Write a Review

11 Customer Q&A(s)

$389.00

Ships From Manufacturer. Average Time To Ship Is 5-7 Business Days

Display Color *

Bezel Options *

OBD-II Cable *

Product Features
3 Customer Review(s)
11 Q&A(s)

Powerful Digital Gauges that can Replace your Dash Monitor

Getting a set of gauges is pretty awesome, and can add an aggressive look to your vehicle of choice, but with each gauge only showing one small piece of data, they're only so handy. Likewise, a dash monitor shows a ton of data, but looks clunky in your interior. The perfect balance between the two options is Aeroforce's Interceptor digital gauges. These awesome gauges tap into your car or truck's OBD-II port and can display two different sets of data on its fairly large display area which comes in your choice of color scheme. The gauges can pull and display practically any data output through your vehicle's OBD-II port and even been set to cycle through up to 8 parameters so that you get a complete view of your engine's running condition. Each Aeroforce Interceptor gauge comes with everything you need to get the gauge set up and running, and it will even fit in most standard gauge pods for an even cleaner look in your car or truck.

Reads and Displays Practically any OBD-II PID Ouput

While this pair of gauges gives the outward appearance of being a fairly basic digital gauge, the low key exterior shields an incredibly complex gauge system that's perfect for practically any vehicle or application. The Interceptor Single Gauge kit comes with the gauges themselves as well as a complete OBD-II Y-splitter cable that pulls both information and power from your truck's PCM and wiring for both of the gauges in this kit. The Aeroforce Interceptor Dual Gauges can pull and display a huge amount of information about your vehicle's engine, and certain parameters can even be set to trigger the display at certain points to help alert you to issues with your motor before they become complete disasters. The Aeroforce Interceptors can even read, display, and clear DTCs which make them extremely handy for troubleshooting maintenance issues. The gauges even have analog inputs on its rear that can accept expandable sensors for parameters that your vehicle doesn't output through its OBD-II, making it easy to tailor the gauges to your application. The Aeroforce Interceptors also have performance estimations for your vehicle's 0-60, 1/8 mile, and 1/4 mile times to give you an idea of what your car or truck is capable of.

Several Options for Gauge Look and Cable Length

The gauges feature a standard gauge diameter of 2-1/16" (52mm), which allows it to fit into most aftermarket gauge pods or gauge adapters without modifications. The gauges come with a black face preinstalled, as well as white face included in the box. The standard bezel color for this gauge is black with a silver center ring. Full black, polished silver, and anodized silver bezels are also available at additional cost. Each one of Aeroforce's Interceptor gauges comes standard with a 5-foot OBD-II cable which can be upgraded to a 9-foot cable at additional cost. Please select all of your gauge options from our drop-down menu above before ordering.

Dual Gauges: the price is for two Aeroforce Interceptor Gauges. A kit with a single gauge is also available.

Fitment: 2011-2020 Ford Vehicles

These should read boost on the Ecoboost F150's right?

Asked by: Steven Simmons - 12/19/2014

Yes, indeedy. The EcoBoost F150s output boost pressure through the OBD-II, which can be read by the aeroforce.

Was this answer helpful? 6 of 6 Found Helpful.

Answer provided by: [email protected] (12/22/2014)

Submit an answer

Do these gauges remember a peak for the things being monitored? I'd like to be able to go back and check what my peak boost was after the fact rather than try to watch the gauge while trying to make peak boost.

Asked by: James - 1/2/2015

Unfortunately, the Interceptor does not have a Peak Recall function.

Was this answer helpful? 5 of 5 Found Helpful.

Answer provided by: [email protected] (1/5/2015)

Submit an answer

What info will this gauge show?

Asked by: will400 - 3/5/2015

First off, this is not a single gauge. You get two gauges and an ODB-II Y-splitter in this kit. What the gauges display varies by vehicle, but they can display pretty much any information output by your car or truck's OBD-II port. If you want to get more specific, give us a call directly at 1-877-578-2433.

Was this answer helpful? 3 of 3 Found Helpful.

Answer provided by: [email protected] (3/6/2015)

Submit an answer

Will this guage read oil pressure and water temp through the obd on a 2013 ecoboost ?

Asked by: Paul - 1/10/2015

It can read coolant temperature, but not oil pressure, unfortunately.

Was this answer helpful? 2 of 2 Found Helpful.

Answer provided by: [email protected] (1/12/2015)

Submit an answer

I have a 2015 police interceptor with ecoboost 3.5. I'm interested in the dual aeroforce gauges, programmer for 89 performance, and cold air. Maybe tyre throttle spacer too. Will these all work on mine which is basically like a sport? Does the dual gauge kit come with the mounting pod? I'llhave a cat back exhaust 3" done locally. Thanks! Btw, we get free gas with work and it's only 89 octane I must use.

Asked by: steven erler - 5/1/2015

The dual gauges will work fine in your application, however, we don't currently have any sort of gauge pod available for the 2015 Explorers as of yet. 5-Star should be able to get you tunes, however, you may want to consider calling us directly at 1-877-578-2433 so we can verify your Interceptor's PCM strategy code or box code and make sure SCT has tuning unlocked.

Was this answer helpful? 1 of 1 Found Helpful.

Answer provided by: [email protected] (5/4/2015)

Submit an answer

Why do i need two gauge instead of one? Now does these gauge ck exhaust turbo temp? Last is since my 2011 ford ecoboost has two turbo how will i know which turbo is boosting or do i need to buy two gauges one for ea turbo how does this work i would like to buy this but base on your answer i cam decide what to get thx u

Asked by: john clear - 5/26/2016

You don't necessarily need two gauges, however, getting two gauges allows you to display more information at a time than just a single gauge. Boost pressure is measured for the entire intake system at the intake manifold, and you do not need to measure boost pressure per turbocharger.

Was this answer helpful? 1 of 1 Found Helpful.

Answer provided by: [email protected] (5/27/2016)

Submit an answer

Does one gauge display two kinds of info?

Asked by: Ddugg - 9/15/2016

They can. It just depends on how you set them up, since there's a ton of different adjustable options with the Aeroforce gauges.