2015-2020 Ford F150 2WD/RWD Eibach Pro-Lift Front Coil Springs | Part# E30-35-035-05-20

2015-2020 F150 2WD Eibach Pro-Lift Front Springs

We price match! Call 623-434-5277!

Part#:

E30-35-035-05-20

0 Review(s) Write a Review

6 Customer Q&A(s)

$245.00

3 in stock: Ships in 1 Business Day

You will earn

Reward Points with this Purchase.

Product Features
6 Q&A(s)

Adds Even More Ride Height without Effecting Ride Quality

Eibach's Pro-Truck Front Struts are already a potent upgrade for your 2015-2020 F150 with 2WD/RWD, but you can take them to the next level of ride height and performance with these Eibach Pro-Lift Front Coil Springs. Eibach's Pro-Lift Springs replace your F150's factory coil springs in your Eibach Pro-Truck Sport Front Struts and get you up to 2.75" of front lift/leveling when used on the Pro-Truck Struts' lowest perch setting. Eibach's Pro-Lift Coil Springs are the perfect way to squeeze out some extra ride height to fit on big wheel and tire combinations, all without compromising your F150's ride quality or handling performance.

Pair of 525in-lb Springs with Silver Powder Coat Finish

Eibach's Pro-Lift Front Coil Springs were specifically designed to fit 2015-2020 F150s equipped with Eibach Pro-Truck front leveling struts in order to extend their rated maximum ride height of 2.10" to 2.75" all without causing ride quality issues. Eibach's Pro-Lift Coil Springs are rated at 525in-lbs, which helps maintain a clean ride on and off the road, even at their maximum 2.75" of ride height. The springs feature a silver powder coat finish to help them resist corrosion in practically any climate or application. The Pro-Lift Coil Springs come backed by a Eibach Limited-Lifetime Warranty, and Eibach includes installation instructions.

Fitment: 2015, 2016, 2017, 2018, 2019, 2020 F150 2WD/RWD.

For Eibach Pro-Truck Front Struts Only: Eibach's Pro-Lift Coil Springs are only compatible with Eibach Pro-Truck Front Struts, and are not guaranteed to work with any other strut system.

Lowest Perch Setting Only: Eibach's Pro-Lift Springs can only be used on the lowest perch setting of the Pro-Truck Strut Assemblies.

Spring Compressor Recommendation: we strongly recommend using a floor-mounted or wall-mounted spring compressor rated for full-size truck springs to install the Eibach Pro-Lift Coil Springs to avoid possible injury or death.

If the springs are for a 2.7 inch lift with the bilstein 5100s at the lowest perch would it work if it was at the number 1 perch setting for an increase inch

Asked by: Matt - 6/6/2022

We do not recommend it. You should not take a 2015-2020 F150 beyond 3" of front leveling, even on a 2WD/RWD model without CVs. You'll compromise your tie rod, UCA, and LCA angles pretty badly. If you want to go that high, your better bet would be a complete 4" suspension lift kit.