2021-2025 Ford Bronco 2.3L Injen EVOLUTION Cold Air Intake System with Red 8-Layer Oiled Cotton Gauze Air Filter | EVO9300C

2021-2024 Bronco 2.3L Injen EVOLUTION Cold Air Intake System - Oiled Features:

• Dyno Proven gains of up to 13 hp and 13 lb.-ft. of torque
• Massive intake tube that tapers down from 5in OD to 3.5in for increased airflow
• Large forward-facing inlet is twice the size of OE to maximize incoming cool air from behind the grille
• Secondary Inlet for additional airflow OR to adapt to Injen’s upcoming snorkel system
• No Tune Required - Designed to work seamless with the stock calibration
• Unlike the competition, the Injen intake tube goes all the way to the turbo
• Aggressive under hood appearance while maintaining an OE fit
• Utilizes our patented Twist-Lock Filter attachment system
• Durable XLPE Roto-Molded Polyethylene tube and housing
• Reinforced automotive grade silicone couplers
• Fully serviceable Injen Red 8-Layer Oiled Cotton gauze air filter
• Stainless steel band clamps with inner protective liner
• Aggressive under hood appearance while maintaining an OE fit
• Clear inspection badge allows you to quickly check the condition of your air filter while the red stripe enhances under hood appearances
• Injen Technology Limited Lifetime Warranty
• Fits Ford Bronco 4-Door & 2-Door w/ 2.3L Engine ONLY

The 2021-2024 Bronco 2.3L Injen EVOLUTION Cold Air Intake System Optimizes Airflow for Maximized Power and Performance

No matter how impressive you think the new 2021-2024 Ford Bronco is since its reintroduction, there is more power that can be pulled out of its 2.3L engine that can be extremely beneficial in off-road and towing applications. Using the 2021-2024 Bronco 2.3L Injen EVOLUTION Cold Air Intake System, you can get dyno-proven gains of up to 13HP of horsepower and 13 lb.-ft. of torque. This extra power comes from a more free-flowing design that allows for maximized airflow. It starts with the large forward-facing inlet that maximizes the amount of cool air coming in from behind the grille. Then there is the massive tubing that tapers down from 5" OD at the inlet to 3.5" at the turbo, which is optimal for increasing airflow. The overall volume of air is now greater, which increases power and performance across the entire RPM band. There is even a secondary inlet that brings additional airflow, while also allows for the incorporation of a snorkel system. There is no cold air intake that has more features to optimize airflow than this one from Injen.

Red 8-Layer Oiled Cotton Gauze Air Filter

The 2021-2024 Bronco 2.3L Injen EVOLUTION Cold Air Intake System features a 1-piece box design that showcases Injen's patented Twist Lock air filter attachment technology. This version of the intake features Injen's Red 8-Layer Oiled Cotton gauze air filter, which is designed for the overland warrior. It is larger than your average air filter to maximize air volume, which leads to more power gains. If you are doing some serious driving, then this air filter is going to be best for filtering out finer silt. The housing box on this intake is molded onto the larger ram air scoop which is twice the size of your stock unit. With this larger ram air scoop, you can capture tons more cool air to feed to your turbo. When it comes to incorporating this intake into your current 2.3L engine build, the integration is seamless with the custom design and dyno-tuning that creates a perfect fit with maximum power output. The installation process is quick and easy with all the quality hardware included like the stainless steel band clamps with inner protective liner and reinforced automotive grade silicone coupler. When you step back and see it on your build, you will notice how it makes your Bronco's appearance look more aggressive, while maintaining a stock fit.

Fitment:

• 2021, 2022, 2023, 2024 Ford Bronco 4-Door w/ 2.3L Engine
• 2021, 2022, 2023, 2024 Ford Bronco 2-Door w/ 2.3L Engine

Does Not Fit Ford Bronco Sport or Ford Bronco 4-Door & 2-Door w/ 2.7L Engine