2004-2008 F150 4WD Baja Kits Long Travel Front Race Kit F12R04 3.0

Add Massive Levels of Travel and Widen your F150's Stance

Transforming your 2004 to 2008 F150 with 4WD into a hyper-aggressive off-road machine means you're going to need to maximize the suspension travel of your front wheels, and our friends over at Baja Kits put everything you need to make it happen all in one convenient package. The Baja Kits Front Long Travel Race Kit for the 2004 to 2008 F150s gives your truck 18" of wheel travel, widens your stance by 5", and helps add 4" to 6" of lift, depending on what coilover you're using with the system and its ride height settings. Baja Kits carefully designed their long-travel system to be the ultimate front suspension kit for your F150 and was carefully CAD designed and built with heavy duty boxed steel components that allow the system to handle just about any terrain or application that you see fit for your hyper-aggressive off-road F150 build.

Includes New UCAs, LCAs, Spindle, Tie Rods, and Supporting Hardware

All of the components included in the Baja Kits Long-Travel Race System were all carefully designed to maximize your F150's off-road ability and travel while fitting up to 37" tires on wheels with 5" of backspace and taller fiberglass fenders. The Long-Travel Race Kit includes Baja Kits Uniball Upper Control Arms, Boxed Uniball Lower Control Arms, Custom Fabricated Spindles, new long-travel axles, heavy-duty steering kit that includes strong tie rods with heim joints, limit straps, braided steel brake lines, tabs for relocating the wiper fluid reservoir and battery, and all the necessary hardware for each of the components. The UCAs, LCAs, and Spindles are all made out of boxed steel that's expertly welded together by Baja Kits to give each component extreme levels of strength to handle just about any off-road challenge. The LCAs and UCAs feature uniball joints instead of a standard ball joint which resist binding and provide much greater travel than stock. The new tie rods can handle the increase travel brought on by the other components and are much stronger than stock. Baja Kits' limit straps keep the system from articulating too far and pulling apart your coilover of choice.

Coilovers required: this system does not come with coilovers, and new coilovers will be required for proper installation and operation of this system. Baja Kits recommends 2.5x10" stroke coilovers with a collapsed length of 18.375" and an extended length of 28.375" for proper operation. Please call Stage 3 directly at 1-877-578-2433 for possible coilover options.

4" Flared fenders may be required to clear the maximum up-travel of this kit with certain tire options.

This kit requires drilling, grinding, and welding for proper installation, and a professional install by a competent fabrication shop is highly recommended.