2011-2016 Ford F250/F350 4WD 6.7L w/o Rear Overload Zone Offroad 4 inch Lift Kit w/ FOX 2.0 Shocks | F16F

F250/F350 4WD 6.7L Zone Offroad 4 inch Lift Kit Features:

• For trucks without rear overload springs
• 4 inch lift clears 35 inch tires
• Full-length coil springs maintain ride quality
• Radius arm brackets correct axle positioning
• Heavy-duty track bar recenters front axle
• Rear lift blocks and U-bolts included
• FOX 2.0 shocks improve ride and control
• Race-developed piston design for performance
• Durable clear anodized shock finish

A Confident Stance Without Compromising Ride Quality

If you're looking to give your 2011–2016 F250 or F350 4WD with the 6.7L Power Stroke a proper lift without factory rear overload springs, this 4 inch kit from Zone Offroad is a solid upgrade. It brings your Super Duty up just enough to clear 35 inch tires with the space needed to flex off-road or cruise around town with confidence. The full-length coil springs up front are tuned specifically to preserve ride quality while adding real clearance, not just looks. Radius arm drop brackets help keep your factory arms in the right geometry, and a heavy-duty track bar ensures your front axle stays properly centered. Out back, the rear lift is handled with a block and U-bolt system that's tailored for trucks without the factory overload leaf, keeping things level without stiffening up the ride.

FOX Performance Shocks and Trail-Ready Construction

Where this kit really shines is in the ride control department. The FOX 2.0 Adventure Series shocks bring a serious performance edge over the standard twin-tube option. With a monotube design, internal floating piston, and race-inspired valving, they respond better over uneven surfaces and resist fade over long drives. These shocks aren’t just about handling bumps, they help your truck stay planted whether you’re towing, trail riding, or just handling daily duty. The entire kit is built to handle regular use, with high-quality components designed to bolt into factory mounting points without the need for cutting or complicated modifications. If you’re building a Super Duty that looks good, rides right, and holds up to real-world use, this kit delivers exactly what you need with the clean install and ride refinement you’d expect.

Vehicle Fitment: 2011, 2012, 2013, 2014, 2015, 2016 Ford F250/F350 4WD Diesel without Factory Overload

Important Notes:

1. Although extremely rare, front and/or rear drive-line vibration may occur and require drive-line modification.
2. Factory wheels fit when paired with factory / original equipment tire size.
3. This lift will require replacing your truck's factory rear block to achieve a level stance; total height gained will vary depending on the size of the factory block.
4. Exhaust modification may be required to clear the front driveshaft on gas models. See installation instructions for more information.
5. Two-piece rear drive shaft? Add a carrier bearing drop kit to reduce post-lift driveline angles and avoid / eliminate driveshaft vibration.