2004-2014 F150 4WD Timbren 14,000lb Front Suspension Enhancement System FF150F

Highlights:

• Reduces front sag in quality package
• Handles up to 14,000lbs of load
• Features specialized spring and bracket
• Easily installs onto your F150
• Comes with hardware and instructions
• Backed by a limited lifetime warranty

Reduces front Sag without Hurting Ride Quality

If your F150 is rocking a snow plow or heavy off-road bumper and winch combination, front-end sag can be issue. If you want to correct front sag caused by excessive loads without breaking your bank, you'll need the Timbren Front 14,000lb SES System. Timbren's front SES system consists of one of their unique Aeon® springs combined with a heavy-duty steel bracket to prop the front of your F150 up to a near-stock stance after you've added serious hardware and weight to your F150's front end. The SES system's spring, despite acting as a front end bump stop, still leaves your F150 a smooth ride so that you don't have to sacrifice ride quality for the gear you need. The Front SES Kit can handle up to 14,000lbs of load, allowing you to run your plow or big winch bumper without issues.

Unique Spring Design with Heavy-Duty, Bolt-On Bracket

The Timbren Front SES System for the F150 is fairly easy to install and comes with high-quality components that will last your F150 a lifetime. Each of Timbrens' Front SES Systems is built around one of their Aeon® springs that use a unique rubber compound and a hollow core to generate a progressive spring rate that can handle big loads and smooths out front-end bumps and jolts when you're rolling around with heavy gear. The springs are held fast by a pair of strong, laser-cut steel mounting brackets that place the Aeon® spring near your F150's LCA and come standard with a black powder coat finish to protect against corrosion. The entire kit bolts right onto your F150's frame using Timbren's supplied hardware and does not require drilling or permanent modifications. The Timbren SES Kit is backed by a limited lifetime warranty.

Fitment:

• 2004-2014 F150 4WD
• 2004-2008 F150 RWD/2WD

Not for Heritage or Raptors: this kit will not fit 2004 Heritage Editions or 2010-2014 SVT Raptors.

Will not fit with lift kits: the SES system will not fit with suspension lift kits with dropped crossmembers.