2011-2018 F150 3.5L EcoBoost Full Race Throttle Body Spacer w/ Ports FR-TBS-ECO

11-18 F150 3.5L EcoBoost Full Race Throttle Body Spacer

We price match! Call 623-434-5277!

Part#:

TBS-ECO

2 Review(s) Write a Review

10 Customer Q&A(s)

$142.99

Not for Sale

You will earn

Reward Points with this Purchase.

Product Features
2 Customer Review(s)
10 Q&A(s)

Discontinued

Provides More Options for Custom BOV Setups

Custom blow-off valve setups or easily running a boost gauge aren't exactly the simplest things to do on the 2011 to 2018 F150 EcoBoosts, making it difficult to put together an aggressive custom build and adequately monitor your truck's performance. Full Race came up with a clever solution to both problems with this throttle body spacer. The spacer features two boost ports with high-quality fittings that allow you to easily install an aftermarket remote blow-off valve and/or boost gauge for improved performance and accurate readings. The Full Race EcoBoost throttle body spacer easily installs right between your truck's factory throttle body and intake manifold, and doesn't require tuning or other upgrades.

Very Easy Install and Operation

The Full Race Throttle Body Spacer comes with everything you need for installation, including longer bolts, vacuum fittings, and new O-ring. The spacer's fittings can accept practically any gauge or blow-off valve on the market, but Full Race does highly recommend using a dedicated vacuum line with no T-fittings on mechanical BOVs. The kit drops into place in minutes with no modifications to your truck's throttle body or intake manifold.

Charge Pipe Fitment: the Full Race Throttle Body Spacer is not compatible with aFe's Bladerunner Charge Pipe or any other aftermarket charge pipe, except for the piping included with the Full Race F150 EcoBoost Intercooler.

What is the ports for ? and if the ecoboost is sprayed can the ports be used for meth,and nos....what are all the uses If the Eco is sprayed ,what happens to the spacer ? normally nos kits come with a TB ring for the jets

Asked by: mark - 8/16/2014

The most common use is pulling vacuum when using an aftermarket BOV in place of the eBOVs on 2013 to 2014 F150 EcoBoosts. They can also be used for water-methanol and nitrous kits, especially on baseline systems that don't come with a post-throttle injection ring.

Was this answer helpful? 6 of 7 Found Helpful.

Answer provided by: [email protected] (8/18/2014)

Submit an answer

I have the 73mm aftermarket throttle body on 2016 3.5 ocoboost will this work?

Asked by: r.valentin - 6/6/2018

Yep. This throttle body space will work just fine with a Bk 73mm throttle body.

Was this answer helpful? 3 of 3 Found Helpful.

Answer provided by: [email protected] (6/7/2018)

Submit an answer

if i get this throttle body spacer with the ports will i be able to put the turbosmart bov for 2011 to 2012 on this even though it wont fit a 2013 ?

Asked by: kyle allman 2013 f150ecoboost 3.5 - 3/17/2014

That type of setup would not work. The fittings are capable of fitting an air line that can be used for a custom BOV setup, but there is no place on this throttle body spacer to mount up the Turbosmart Kompacts at all.

Was this answer helpful? 2 of 2 Found Helpful.

Answer provided by: [email protected] (3/17/2014)

Submit an answer

Will this spacer work on a 2017 F150 3.5 Ecoboost? What are the benefits other than the ports?

Asked by: Clint Hays - 9/27/2017

None, really. The entire purpose of this spacer is to provide NPT ports for boost reference and/or water-methanol injection.

Was this answer helpful? 1 of 1 Found Helpful.

Answer provided by: [email protected] (9/28/2017)

Submit an answer

If I have turbosmart bov already installed can I still install this spacer strictly for a boost gauge??

Asked by: F150trucker621 - 3/20/2015

Yup, absolutely. However, the spacer may be overkill if your boost gauge of choice comes with line/tapping hardware for a vacuum/boost source. That being said, the spacer is still an excellent choice if you're going to add a water-meth kit down the road.

Was this answer helpful? 0 of 0 Found Helpful.

Answer provided by: [email protected] (3/23/2015)

Submit an answer

If I buy the Turbo Smart BOV for the 2013 F150 will buying this make the install easier? I don't plan on doing a meth kit down the road only a catch can.

Asked by: Luke - 5/8/2015

It really wouldn't. The install of the SuperSonic SP kit would still be more or less the same, with or without the spacer.

Was this answer helpful? 0 of 1 Found Helpful.

Answer provided by: [email protected] (5/11/2015)

Submit an answer

We just purchased a service contract for our 2013 f 150 eco boost and wondered why the contract does not cover the throttle body? Is there a high failure rate?

Asked by: Robert Yeager - 9/15/2015

Honestly, I couldn't tell ya. I've only heard of a couple of folks who've had to replace their throttle bodies over the years (and most of those were on heavily-modified trucks), so it's definitely not a widespread issue.

Was this answer helpful? 0 of 0 Found Helpful.

Answer provided by: [email protected] (9/16/2015)

Submit an answer

Can the boost ports be used as the dedicated vacuum lines on a 2011 ecoboost with Turbosmart BOVs?

Asked by: Thomas - 10/11/2017

The 2011 F150s do not require additional vacuum lines, since their factory BPVs are mechanical.

Was this answer helpful? 0 of 0 Found Helpful.

Answer provided by: [email protected] (10/11/2017)

Submit an answer

Will this work on an afe magnum force cai?

Asked by: Tim Emery - 5/8/2020

This spacer is not effected by cold air intakes. The EcoBoost F150s connect at the throttle body with the intercooler cold side tube/charge pipe.

Was this answer helpful? 0 of 0 Found Helpful.

Answer provided by: [email protected] (5/11/2020)

Submit an answer

Will this fit 2020 f150 3.5 lariat

Asked by: Rick Rutkowski - 7/17/2021

Full-Race has only confirmed fitment and function up to the 2018 F150 model year.

Was this answer helpful? 0 of 0 Found Helpful.

Answer provided by: [email protected] (7/19/2021)

Submit an answer

Have Questions?

2011-2018 F150 3.5L EcoBoost Full Race Throttle Body Spacer w/ Ports FR-TBS-ECO

TBS-ECO

Discontinued

Provides More Options for Custom BOV Setups

Very Easy Install and Operation

What is the ports for ? and if the ecoboost is sprayed can the ports be used for meth,and nos....what are all the uses If the Eco is sprayed ,what happens to the spacer ? normally nos kits come with a TB ring for the jets

I have the 73mm aftermarket throttle body on 2016 3.5 ocoboost will this work?

if i get this throttle body spacer with the ports will i be able to put the turbosmart bov for 2011 to 2012 on this even though it wont fit a 2013 ?

Will this spacer work on a 2017 F150 3.5 Ecoboost? What are the benefits other than the ports?

If I have turbosmart bov already installed can I still install this spacer strictly for a boost gauge??

If I buy the Turbo Smart BOV for the 2013 F150 will buying this make the install easier? I don't plan on doing a meth kit down the road only a catch can.

We just purchased a service contract for our 2013 f 150 eco boost and wondered why the contract does not cover the throttle body? Is there a high failure rate?

Can the boost ports be used as the dedicated vacuum lines on a 2011 ecoboost with Turbosmart BOVs?

Will this work on an afe magnum force cai?

Will this fit 2020 f150 3.5 lariat

Mailing List