2013-2018 Focus ST Hawk HPS Rear Brake Pads HB478F.605

Massive Stopping Power For Street Performance

These High Performance Street (HPS) Rear Brake Pads from Hawk Performance are ideal for Ford Focus ST's that need increased stopping power for aggressive braking situations. They feature a high-performance ceramic compound that can take the heat of street performance using the safety and quality of Aerospace and motorsports severe-duty friction technology to ensure they perform safely. The HPS Rear Brake Pads feature a unique Ferro-Carbon, high-tech friction material that was developed and manufactured for high-speed street driving. The High Performance Street compound offers a higher coefficient of friction over stock brake pads and can provide you 20-40% more stopping power and higher resistance to brake fade than most standard replacement pads. Less fade means you will have a highly durable brake pad with less brake dust.

Reliable Heavy Braking Performance

These aggressive street racing rear brake pads are constructed with a unique Ferro-Carbon formulation that provides high fade tolerance and a much wider temperature range than your stock pads. They were developed specifically for your Focus ST and will work perfectly upgraded aftermarket or factory stock rotors. With this set of new rear brake pads, you get a higher friction coefficient than what the stock brake pads provide, along with increased resistance to brake fade. Brake fading is one of the most detrimental issues associated with the high energy and heat produced from hard braking.

Fitment: 2013-2018 Ford Focus ST.

HPS Features:

• Increased Stopping Power
• High Friction/Torque - Hot or Cold
• Gentle On Rotors
• Extended Pad Life
• Extended Rotor Life
• Low Dust
• Virtually Noise-free
• Reduced Brake NVH
• Great For Street & Occasional Track Racing

Lifetime Warranty: All Hawk HPS Brake Pads provide a limited lifetime warranty, ensuring products to be free of defects from manufacturers workmanship and materials.

Important Notes: Hawk Performance burnishes its HPS Brake Pads as a final step in the factory, but all brake pads have to be bedded-in with the rotors (new or used) that they will be used against. Properly bedding-in new brake pads results in a transfer film being generated at the pad and rotor interface to maximize brake performance.