Menu
Toggle navigation
Items 0
Cart

2015-2020 Ford F150 4WD SuperLift 4.5 inch Suspension Lift Kit with Superide Shocks K102

2015-2020 F150 4WD SuperLift 4.5 inch Lift Kit - Superide Shocks - 2015-2020 F150 4WD SuperLift 4.5 inch Lift Kit - Superide Shocks
2015-2020 F150 4WD SuperLift 4.5 inch Lift Kit - Superide Shocks
SKU K126
1 Review(s)
$1,559.99
0 in stock Ships from Manufacturer in 10-15 business days
Free shipping included
60-day returns on most items
Earn reward points with this purchase
11 Customer Q&A(s)
Write a Review
Please hold for video...
Write a Review
Average Rating
2015 F150 XLT Supercrew 4x4
I compared this lift to other lifts before I bought it. The next higher priced lift (about 200 more) is from Rough Country. The main difference between the two is that the Rough Country has metal cut out of the cross-members to make it lighter and it has possibly more ground clearance in the front cross-member. I also compared it the Rancho lift which is about 500 more, depending on where you purchase it. That lift has metal tubes connecting the crossmembers which make it stronger. Other than that these three kits really all are extremely similar. They all use strut spacers in the front, lift blocks in the rear, lower crossmembers and new knuckles. I purchased this kit because it was the most affordable and had the same components of higher priced kits. This is my daily driver and I have a Jeep TJ that I use for offroadin, so I knew I wouldn't be doing any extreme offroading in this vehicle. If I had plans on that I probably would've gotten a lift with coilovers. The parts of this kit are beefy and well made. It took me and a friend about 16hrs to install, in my driveway with hand tools and jack stands. It is a two person job because the front differential is very heavy for one person to drop. The instructions are very clear. There is one step where cutting is required, I had to cut several times and put the front differential on and off to check for clearance. Other than that part everything was straight forward. The only other hard part is putting the driveshaft back in the knuckle. You have to be careful with that because if it isn't seated you will crush the 4x4 actuator. It took a few tries to get it seated perfectly. After the install the camber was extremely off and I drove it very slowly to an alignment shop. After alignment it drives smoothly at 75. In fact it drives much better than when I had a leveling kit. I would recommend this kit over the 6 kit because the 6 kit uses the same knuckles as the 4.5 kit and it will change angle of the the upper control arm and pitman arm, to be like if it had a leveling kit. I am running 295/70r18 on aftermarket wheels. I highly recommend this kit.
Did you find this helpful?  30 of 31  Found Helpful
Reviewed by:  (Verified Buyer)  from Edinburg on 1/12/2017
5
Load More

Customer Question On your 4.5 lift for the 2020 xlt crew cab sport does it need any cutting or trimming to installed ?

Asked by: Joseph - 7/13/2021
Customer Answer This lift kit will fit a 2020 F150 XLT SuperCrew with 4WD. The lift kit absolutely requires subframe cutting, trimming, and drilling for installation.
Was this answer helpful?  0 of 0  Found Helpful.
Answer provided by: Jason@Stage3 (7/13/2021)
Submit an answer

Customer Question I am looking into purchasing the super lift 4.5 kit for my 2020 F-150 4x4. My question is how does this kit do towing. I have a 7000 lb camper I tow.

Asked by: Todd - 10/25/2020
Customer Answer This kit does not technically impact your truck's rated payload, GVWR, or GCWR (other than the additional weight of the kit and what wheels and tires you're using). The only real issue is that this kit does tend to put your truck near-level, which would result in some rear squat when towing, so you may want to consider some kind of load-leveling system and you'll need some sort of dropped hitch to compensate for the rear lift.
Was this answer helpful?  0 of 0  Found Helpful.
Answer provided by: Jason@Stage3 (10/26/2020)
Submit an answer

Customer Question With this kit can I run a 20x9 with a +01mm offset and a true 35x12.5 tire?

Asked by: Bryan - 6/21/2019
Customer Answer Yep. A 20x9" wheel with an 01mm has 5" of backspace, which exceeds this kit's 5.50" maximum backspace requirement to clear a 12.50" wide tire.
Was this answer helpful?  1 of 1  Found Helpful.
Answer provided by: Jason@Stage3 (6/24/2019)
Submit an answer

Customer Question Would this lift work with an add a leaf kit? Because to my knowledge this kit levels your vehicle. But I use my trunk and hitch on a daily basis. I want that extra inch up in the trunk.

Asked by: Moustapha Harajli - 1/31/2018
Customer Answer You can add an add-a-leaf kit to this lift kit, though we'd recommend grabbing a set of longer shocks while you're at like the BDS Fox 2.0s for 6" lifts.
Was this answer helpful?  1 of 1  Found Helpful.
Answer provided by: Jason@Stage3 (2/5/2018)
Submit an answer

Customer Question can I get a credit for this kit w/o the rear shocks and w/o the front strut spacers, as I would like to get the fox 2.0 struts and already bought the icon rear shocks. Right now my truck sits 1.5" higher in the rear w/1.5 lift on the front and air bags on the rear for towing a boat w/only 5 psi in the bags. My thinking is I could use my frt lift w/the fox shocks and cut the rear spacers to 1" to make the truck be perfectly level and the rear Icon shocks will still be within their travel limits. Also, could I run this kit at only 3.5" of lift in the front, seems better to be 1/2" low than 1.5" high up front for the shafts and travel?

Asked by: Thomas Richter - 11/19/2017
Customer Answer To custom order this kit, please give us a call directly at 623-434-5277. This kit does not come with a rear spacer, just a rear block. In order to get the ride height you want you'd simply substitute a smaller rear block into the kit. The kit is designed for 4.5" of lift, and we don't really recommend running it at 3.5", since that amount of extra up-travel could cause an issue. If you'd like to use a lower amount of lift, your better bet would be to use a true 4" lift and slightly decrease your height from there.
Was this answer helpful?  0 of 0  Found Helpful.
Answer provided by: Jason@Stage3 (11/21/2017)
Submit an answer

Customer Question Can I run 17x8 0 offset wheels with this lift?

Asked by: Bo - 10/12/2017
Customer Answer Unfortunately, Superlift can only guarantee the fitment of 18" wheels.
Was this answer helpful?  0 of 1  Found Helpful.
Answer provided by: Jason@Stage3 (10/12/2017)
Submit an answer

Customer Question Is there any cutting of existing parts or welding needed?

Asked by: Dave - 3/17/2017
Customer Answer This kit does require cutting and drilling your F150's subframe for installation. No welding is required.
Was this answer helpful?  0 of 0  Found Helpful.
Answer provided by: Jason@Stage3 (3/20/2017)
Submit an answer

Customer Question Will this particular kit fit a 2wd xlt supercrew?

Asked by: Jose - 2/13/2017
Customer Answer It will not. This kit only fits models with 4WD.
Was this answer helpful?  0 of 0  Found Helpful.
Answer provided by: Jason@Stage3 (2/15/2017)
Submit an answer

Customer Question 20x10 -24 offset 4.56 backspacing and 35x12.50s rub with this lift kit?

Asked by: gage - 11/17/2016
Customer Answer That wheel and tire combination should be able to clear with this lift kit.
Was this answer helpful?  0 of 0  Found Helpful.
Answer provided by: Jason@Stage3 (11/18/2016)
Submit an answer

Customer Question Will a 20x12 and 35s fit this kit with 4.75" back spacing?

Asked by: Gage Mcclain - 11/15/2016
Customer Answer You'd likely get some rub on your valance when turning or turning while articulating due to the fact that the high negative offset of 20x12" wheel with 4.75" of backspace pushes the apex of the tire out to where the wheel well starts to curve back into the truck. Especially considering that you'd have to run at least a 12.50" wide tire on those wheels, if not wider.
Was this answer helpful?  0 of 0  Found Helpful.
Answer provided by: Jason@Stage3 (11/16/2016)
Submit an answer

Customer Question What size rear block comes with this kit? I assume this kit will make the truck sit level.

Asked by: Josh - 11/2/2016
Customer Answer This kit includes 3.25" rear block, which will bring the truck close to level since the front adds 4.5" of ride height and the rear is already 2.5" higher than the front from the factory.
Was this answer helpful?  1 of 1  Found Helpful.
Answer provided by: Jason@Stage3 (11/3/2016)
Submit an answer
Have Questions?
Load More
Earn reward points
on this product

Stage 3 Rewards is our free customer loyalty program. Earn points on every order and redeem for cash off your next purchase.

  • 100 bonus points just for signing up ($2 to start)
  • 1 point per dollar spent on every order (2% back)
  • Bonus points for reviews, birthdays, and social shares
  • Redeem for $10, $20, $30, $50, or $100 off coupons
See full program details

WARNING: Cancer and Reproductive Harm

This product can expose you to chemicals including those known to the State of California to cause cancer and birth defects or other reproductive harm.

For more information, visit [www.p65warnings.ca.gov](https://www.p65warnings.ca.gov).

Pick Up Where You Left Off

Similar Products & Categories

Logo