2024-2025 Toyota Tacoma ICON 1.25-3 inch Stage 9 Suspension System w/ Billet UCAs & Rear Springs | Part# K53299S

Tacoma ICON 1.25-3 inch Stage 9 Suspension System Features:

• 1.25–3" adjustable front lift height
• Billet UCAs improve strength and alignment
• Triple-rate rear springs enhance ride quality
• CDXS shocks with dual-speed compression tuning
• Remote reservoirs boost cooling and performance
• Delta Joint PRO allows full suspension travel
• Billet rear links with on-vehicle adjustability
• ICON coil springs tuned for each axle
• Improves control on- and off-road
• Precision CNC-machined aluminum components
• Built for performance, comfort, and durability

Stage 9 Suspension System with CDXS Shock Technology

If you’re ready to take your 2024 Tacoma to the next level in terms of both performance and ride quality, the ICON Stage 9 Suspension System with Billet Upper Control Arms and Rear Springs is a package you need. This is as fully engineered, premium-grade suspension system designed from the ground up for serious 4WD performance. At the center of this setup are ICON’s 2.5 Series coilovers and rear shocks, both equipped with CDXS (Compression Damping – Dual Speed) technology. These aren’t your typical bolt-on dampers; they’re high-performance monotube shocks with external reservoirs and fully adjustable compression valving. What makes CDXS stand out is the ability to independently adjust both high-speed and low-speed compression. That means you can fine-tune how your truck handles sharp hits like rocks or potholes (high-speed) versus slower body movements like cornering or braking (low-speed). The result is a suspension that feels planted, responsive, and totally dialed for your driving style and terrain. Better yet, the remote reservoirs help keep temperatures in check during extended off-road use, which means more consistent performance over time and fewer issues with shock fade.

High-Quality Billet UCAs and Triple Rate Rear Springs

Up front, the adjustable coilovers provide 1.25 to 3 inches of lift, which gives you room for larger tires and added clearance without compromising alignment or steering geometry. To keep everything in check, the kit includes ICON’s billet aluminum upper control arms, and these are a real highlight. Compared to standard tubular arms, the billet UCAs offer greater strength, better heat resistance, and tighter tolerances. They're CNC-machined from 6061 aluminum and come loaded with the Delta Joint PRO, a high-articulation ball joint that offers smooth, bind-free movement through the full range of suspension travel. These joints are also serviceable and rebuildable, making them a smart long-term investment if you’re planning to keep your truck for the long haul. Around back, ICON includes triple-rate rear coil springs that strike a perfect balance between ride comfort and load support. The initial spring rate helps absorb smaller bumps and daily road chatter, while the firmer second and third stages come into play when the truck is loaded or working through rougher terrain. It’s a huge step up from the factory setup, which often feels either too soft or too stiff depending on what you’re doing.

High-Quality Hardware with Straightforward Install

To round things out, the kit features billet rear lower links with on-vehicle adjustability, high-quality dual-durometer bushings, and FK rod ends that allow for full articulation while minimizing road noise and harshness. Every component in this kit is built with longevity in mind–from the CAD-plated shock bodies that resist corrosion to the CNC-machined aluminum parts that hold up against trail abuse and tough climates. Installation is straightforward for a high-end system like this. It’s designed to bolt into factory locations, and all necessary hardware is included. If you’ve done suspension work before or you’re working with a reputable shop, getting this kit installed and dialed in is a smooth and straightforward process.

Vehicle Fitment: 2024 Toyota Tacoma

Application Notes:

• An adjustable track bar is recommended to realign the axle but not required
• Shocks are fully serviceable. Lift heights indicated are for a stock equipped vehicle.
• Advertised lift height ranges are for a stock equipped vehicle. Increasing weight of vehicle due to accessories will alter lift range.
• Will not fit Tacoma submodels equipped with rear leaf springs
• 4WD models require front differential drop part # 55160
• Included rear shocks are compatible with 0-1" of rear lift over stock
• This kit is configured for fitment on 4WD models. If installing onto a 2WD 2024 Toyota Tacoma SR5 or TRD Sport, front differential drop kit part number 55160 is not needed and the other suspension system components can be ordered individually with full system functionality. 2WD specific kits are coming soon!

Wheel and Tire Fitment:

• OEM Wheels & Tires Fitment: Yes
• Recommended Aftermarket Wheels: ICON Alloys - 17x8.5 with 5.75” Backspace / 25mm Offset
• Recommended Aftermarket Wheels: ICON Alloys - 18x9 with 6.00” Backspace / 25mm Offset
• Recommended Aftermarket Tires: 33" x 11.50" (Larger tires may fit but fender trimming and modifications will be required.)