2009-2014 F150 2WD Max Trac MaxPro 4" Lift Kit with Max Trac Shocks K883442

Awesome 4" Lift Kit that's Perfect for Budget Builds

Getting your 2WD F150 an aggressive 4" suspension lift and the ability to clear 35x12.50" tires with the right offset wheels doesn't have to break your bank. Max Trac's MaxPro 4" Lift Kit gives you and your truck all the baseline hardware you need to get your 2WD F150 higher in the air at a great price so that you can save your hard-earned cash for aggressive wheels, tires, or other modifications. The Max Trac MaxPro Kit adds 4" of lift to the front of your truck and 2" to the rear so that your 2WD F150 gets a clean, even stance at a taller ride height for an amazing and tough look. The MaxPro 4" lift kit is a great way to get your F150 lifted while keeping your budget under control.

Taller Front Knuckles Made from Heavy-Duty Iron

The MaxTrac MaxPro 4" Lift Kit adds a full four inches of lift to your F150's ride height, which gives your truck an awesome look and the clearance to mount up big wheel and tire combinations. The kit gives your truck extra lift via a pair of lifted knuckles with taller spindles that are paired with longer brake lines so that your factory lines aren't stretched beyond their specs. The knuckles are made out of high-strength ductile cast iron that's strong enough to handle just about any application that you have in mind for your F150 build. The brake lines included in the front kit are DOT-approved and keep near-OEM performance so that your braking doesn't suffer.

2" Rear Blocks with U-Bolts and Longer Max Trac Shocks

The MaxTrac Lift Kit also includes a full set of rear lift hardware that gets your F150's back end level with the front while maintaining good ride quality. Each MaxPro 4" lift kit comes with 2" rear blocks that add 2" of ride height to your truck and come complete with high-quality U-bolts and U-bolt nuts that firmly hold the blocks to your truck's rear axle no matter how much horsepower and torque it's throwing down. The kit comes standard with a pair of Max Trac hydraulic shocks that are long enough to handle the extra rear lift height and give your F150 good ride quality both on and off the road.

Track Width: the front knuckles increase your truck's track width by .5" on each side.

Wheel Fitment: the front knuckles require 17" or larger wheels with a maximum of a 5.75" backspace to clear 12.50" wide tires.

2WD F150s Only: this kit will only fit 2WD F150s and will not fit 4WD models. This was designed for F150s that do not have factory rear blocks. A kit for trucks that have stock rear blocks is also available.