2014 F150 4WD ICON Stage 2 Suspension Package with Tubular UCAs K93062T

2014 F150 4WD ICON Stage 2 Package with Tubular UCAs

We price match! Call 623-434-5277!

Part#:

K93062T

0 Review(s) Write a Review

12 Customer Q&A(s)

$2,759.80

Retail Price:$2,897.79

Your Savings:$137.99(5%)

0 in stock: Ships From Manufacturer. Average Time To Ship Is 3-4 Weeks

You will earn

Reward Points with this Purchase.

Product Features
12 Q&A(s)

Aggressive Suspension Kit that Also Lifts your Truck

ICON's Stage 2 Suspension System for the 2014 F150s gives your truck extremely impressive off-road performance and will definitely help you keep up with the mighty SVT Raptors when the pavement ends. The Stage 2 kit comes with the same front ICON coilovers and rear shocks as their Stage 1 system, but also includes a pair of Delta Joint upper control arms that improve articulation and performance when combined with the kit coilovers. The Stage 2 F150 Suspension system is even adjustable between stock ride height and 2.63" of lift to allow you to add big wheel and tire combinations to give you the perfect start to a brutal off-road build.

Fully Adjustable Performance Coilovers

ICON's coilovers are all vehicle-specific and were carefully designed and tuned to give your F150 the best performance possible. Each coilover kit consists of an ICON 2.5" aluminum shock body surrounded by an Eibach performance coil spring that work together to provide increased wheel travel and articulation distance without compromising your truck's smooth street ride quality. The coilovers can be adjusted from stock ride height to an extra 3" of lift which allows you to use up to 34" tires on your truck without trimming. The large diameter of the shock body gives these coilovers a huge oil volume that keeps fade down to a minimum and prevents overheating.

Includes ICON 2.0 Aluminum Shocks

For the rear of your truck, ICON throws in a pair of their perfectly excellent 2.0 Aluminum Body shock absorbers. These shocks can even handle up to 2" of lift from a suitable rear block or add-a-leaf kit to make your truck sit evenly or even slightly above the coilovers also included in this package. These nitrogen-charged monotube shocks feature one-piece linear/digressive pistons and 5/8" nitro-steel shafts that provide excellent ride quality, performance, and reliability even under extreme conditions. The shocks are topped off 6061 aluminum rod ends with polyurethane bushings that are strong and reliable enough for practically any application.

Strong Delta Joint Upper Control Arms with improved Articulation

To further improve front suspension articulation and give your truck even better off-road suspension performance, ICON throws in a set of their excellent Delta Joint upper control arms. These extremely strong and versatile tubular control arms work perfectly with the front coilovers included in this package and even help correct their castor angle for better performance. These control arms are made out of CNC mandrel-bent 1026 tubular steel and come standard with high-quality ICON Stage 2 bushings that make them extremely strong and responsive. The control arms feature ICON's unique Delta Joint, which combines the deflection and travel of a traditional uniball with the long-term reliability of a traditional balljoint.

Uniball Caps Included: we here at Stage 3 include a pair of uniball caps for the upper control arms at no additional charge to keep your ICON UCAs working at their best!

2009 to 2013 F150 Fitment: this kit will not have proper, bolt-on fitment to a 2009 to 2013 F150. A Stage 2 kit for the 2009 to 2013 F150s are available here. Call 623-434-5277 for more information.

I have 2 bolts that go down to my lower a arm from my struts on my 2014 F150 XLT 5.0. Do I change my a arms for this?

Asked by: James Akavak - 1/4/2015

No. This kit will fit your truck without swapping your LCAs out for those on older trucks. The Icon coilovers included in this package were specifically designed for use with the par-and-pin mount found on the 2014 F150s, which is why this is a 2014 model year specific kit.

Was this answer helpful? 5 of 5 Found Helpful.

Answer provided by: Jason@Stage3 (1/5/2015)

Submit an answer

Would like to put a 2.5"/3" inch leveling kit on the front and 3" rear blocks on back of my 2015 F150 Crewcab, will this system work? Would 35/12.5/R20 tires mounted on my factory 20" rims fit, or would there be issues? Other choice maybe being 285/65/R20 's? The truck will be used for hunting on rough logging roads but mostly will be my daily driver, will this system sacrifice the ride at all? Thanks

Asked by: Brad - 2/14/2015

There's a few issues with installing this system on a 2015: first, the UCAs will not fit. ICON does have a set of 2015 F150 specific UCAs available, however. Secondly, the coilovers will physically bolt-on and fit your truck, however, they're designed and valved for a 2014 F150, which is a couple of hundred pounds heavier than your 2015. This is a problem, because the valving is already extremely stiff and results in a very firm (though solid) ride on the 2014 F150s, which means the ride on your lighter truck will be even more stiff and firm. If this is your daily-driven truck, we would strongly recommend either waiting for ICON to release their 2015-specific coilovers or going with another coilover option entirely. You can give us a call directly at 1-877-578-2433 to get a few other options.

Was this answer helpful? 3 of 3 Found Helpful.

Answer provided by: Jason@Stage3 (2/16/2015)

Submit an answer

Is there a longer rear shock available? I would like to run an add a leaf/new leaf pack and have an overall rear lift height of 2". While these shocks would keep stock travel with new springs, I was looking for increased down travel for maximum articulation since I am planning to add a locker to the rear dif.

Asked by: Jon - 2/28/2016

Unfortunately, ICON doesn't offer longer rear shocks as standard, though these shocks should be able to handle up an extra 1.5" to a maximum of 2" without too much issue, though if you are going to look into doing a full leaf pack, you may want to figure out total articulation, as some aftermarket leaf packs will pull factory-replacement shocks (like the 2.0s in this kit) out of their valving, regardless of their rated ride height capability.

Was this answer helpful? 3 of 3 Found Helpful.

Answer provided by: Jason@Stage3 (2/29/2016)

Submit an answer

I have a 2014 fx4, I pull a 28' camper and I have air bags on my truck. I want to level the back with the front. Will I still be able to use my air bags with this kit?

Asked by: Tre - 12/7/2015

Yep. As long as you keep the stock rear block, you can use your rear air bags or helper springs with this system, though you may want to get ICON's optional spanner wrench with this kit, so you can dial in the ride height of the coilovers to be level with the rear.

Was this answer helpful? 2 of 2 Found Helpful.

Answer provided by: Jason@Stage3 (12/8/2015)

Submit an answer

Hi, will this fit on the 2013 F-150 with the max payload package? I have the 7 bolt wheels.

Asked by: Terry, 2013 F-150 - 5/14/2014

First off, the package you'd need for your truck is this kit for the 2009-2013 F150s. Secondly, ICON said everything would work as far as coilovers and shocks. What we aren't sure on is whether or not the upper control arms will clear the 7-lug wheels on your truck, given that we don't know their offsets and backspacing. You could play it safe and just grab the Stage 1 Kit, or you can go with the Stage 2 kit and just be prepared to get a set of wheel spacers or aftermarket wheels.