2005-2026 Ford F250 & F350 Method 18x9 inch 317 Titanium 18mm Offset | MR31789087818

F250 & F350 Method 317 Standard Titanium 18x9” Wheel (18mm Offset) Features:

• Gloss Titanium Finish
• Load Rating of 3,640lbs
• Street-Loc V.3 lip with Weight Savings Pockets
• Tough, Aggressive Design
• Lifetime Structural Warranty

Aggressive Design With Gloss Titanium Finish

Add these aggressive Method 317 Standard wheels to your F250 or F350. These wheels feature a tough 9 spoke design. The lip undercut simulates a true beadlock wheel and has replaceable lip bolts. This one has a sharp Gloss Titanium finish that goes really well with black or smoked accessories.

Strong Construction With Vehicle Specific Fit

Installation of this wheel is similar to any other wheel. Method created this 317 Standard wheel to be 18x9in in size with a 8x170 bolt pattern. The wheel is also 35.7lbs with a hub bore of 130.81mm. It is important to note that this particular wheel features a strong 3,640lb load rating. Method created this wheel with a solid A356 aluminum with T6 heat treatment construction. Method also backs this wheel with a lifetime structural warranty.

Specifications:

• Wheel Size: 18x9”
• Offset: 18mm
• Hub Bore: 130.81mm
• Bolt Pattern: 8x170
• Backside Spacing: 5.75”
• Max Load: 3,640 lbs.

Application Note: Fitment applies to Single Rear Wheel (SRW) models only. Be sure to verify offset, backspacing, and brake clearance before purchasing: especially on lifted trucks or those with larger brake packages. Have questions? Call our team at 623-434-5277 and we’ll help you find the perfect fitment for your build.

14-Bolt Rear End Fitment: this wheel's center caps will not fit 2017+ Super Duty Models equipped with 14-bolt rear ends. Cap risers will be required for dual-drilled wheels and Raised Center Caps will be required for single-drilled wheels.

TPMS Disclaimer: If your truck has TPMS sensors, you must transfer them to the new wheels or install new compatible sensors. Failure to do so will result in a TPMS warning light.