35x12.50R20LT Nitto Trail Grappler M/T Radial Tire NIT205-720

35x12.50R20LT Nitto Trail Grappler M/T Radial Tire - 35x12.50R20LT Nitto Trail Grappler M/T Radial Tire
35x12.50R20LT Nitto Trail Grappler M/T Radial Tire
SKU N205-720
0 Review(s)
$526.00
50 in stock Ships in 1 Business Day
Free shipping included
60-day returns on most items
Earn reward points with this purchase
Write a Review
Please hold for video...
Please hold for video...

Customer Question do you know if these will fit in the spare tire well underneath the bed of the truck? i am wanting a full size spare but not sure if they will fit.

Asked by: jeff - 9/25/2017
Customer Answer That's going to depend on what cat-back you currently have on your truck. You can likely fit this tire if you have a stock cat-back or a stock-replacement single-exit cat-back system. However, if you have a dual-exit cat-back kit installed, you will likely have issues fitting a tire this size under your truck's bed.
Was this answer helpful?  1 of 1  Found Helpful.
Answer provided by: Jason@Stage3 (9/26/2017)

Customer Question I have 2005 Ford Excurion and considering Sota wheel Novacaine 20x12 -19 offset. Will the Nitto Grappler M/T 35 12.50 20 work? And how about the noise? I won't be doing any off roading. I just like the look of the tire.

Asked by: Chris - 9/19/2017
Customer Answer Your truck will need to have at least a 2.5" leveling kit i order to clear a 35" tire, and even then, you may have to do some trimming to fit a 12.50" on wide wheel with a very low offset. The Trail Grapplers (like many M/Ts) do have pretty noticeable road noise and hum.
Was this answer helpful?  0 of 0  Found Helpful.
Answer provided by: Jason@Stage3 (9/20/2017)

Customer Question I have a stock 2015 ford f-250 diesel. I have 20 inch tires, to be exact LT275/65R20's.I would like to know the biggest tires I can go without a lift? Was thinking the trail grapplers', but don't know about rubbing. Thanks

Asked by: Danny - 8/25/2017
Customer Answer The 275/65R20s currently on your truck measure out to roughly 34.1x10.8". The R20 designation is what diameter wheel your tires fit. In general, you will not be able to fit a true 35x12.50" tire on a 2011-2016 Super Duty without at least a leveling kit. Maximum tire fitment at stock ride height it going to depend on the specs of your wheels, specifically their widths, offsets, and backspacing. Your best bet would be to call us directly at 623-434-5277 so we can get more specific about your truck.
Was this answer helpful?  0 of 0  Found Helpful.
Answer provided by: Jason@Stage3 (8/28/2017)

Customer Question Hi I purchased the zone 6 inch lift from you for my 2016 f150 crew cab. I also bought the XD Rockstar ii wheels in 20x9. Will this fit without rubbing? I know the xd is +18 offset.

Asked by: Jonathan Nguyen - 3/2/2017
Customer Answer They will not fit. Your wheel's backspacing is too large (5.75"), and Zone's kit requires a maximum backspacing of 5.50" to fit a true 12.50" wide tire. Your best bet would be to use something like a 305 or a 295 wide tire.
Was this answer helpful?  0 of 0  Found Helpful.
Answer provided by: Jason@Stage3 (3/3/2017)

Customer Question I have a 2011 raptor and I want to but the fuel trophy 20x9 wheels will theses tires for the wheels and will I clear without rubbing? Thanks!

Asked by: Joe - 5/31/2015
Customer Answer That largely depends on the offset of the Fuel Trophy wheels that you're planning on getting. You should probably call us directly at 1-877-578-2433 so we can get more specific.
Was this answer helpful?  0 of 0  Found Helpful.
Answer provided by: Jason@Stage3 (6/1/2015)

Customer Question Will this fit my '13 F150 supercrew if i put on your 8" Zonz lift kit package?

Asked by: Mitch - 3/3/2015
Customer Answer As long you have a wheel with 5.50" of backspace or less, yes.
Was this answer helpful?  0 of 0  Found Helpful.
Answer provided by: Jason@Stage3 (3/4/2015)

Customer Question will this fit a 08 f150 super crew 4x4 with a 6 inch lift?

Asked by: Louis - 8/20/2014
Customer Answer It largely depends on your wheel offset, but the answer is "usually." On our 2007 F150 Project Truck with a Zone 6" lift kit, we had some slight rub on the front lower valance with 20x9" wheels with -24mm offsets. If our offset was less aggressive (-12mm or 01mm), then we probably wouldn't have rubbed at all.
Was this answer helpful?  2 of 2  Found Helpful.
Answer provided by: Jason@Stage3 (8/20/2014)
Load More
Earn reward points
on this product

Stage 3 Rewards is our free customer loyalty program. Earn points on every order and redeem for cash off your next purchase.

  • 100 bonus points just for signing up ($2 to start)
  • 1 point per dollar spent on every order (2% back)
  • Bonus points for reviews, birthdays, and social shares
  • Redeem for $10, $20, $30, $50, or $100 off coupons
See full program details

WARNING: Cancer and Reproductive Harm

This product can expose you to chemicals including those known to the State of California to cause cancer and birth defects or other reproductive harm.

For more information, visit [www.p65warnings.ca.gov](https://www.p65warnings.ca.gov).

Pick Up Where You Left Off

Logo