2011-2016 Ford F250 & F350 Diesel 4WD SuperLift 4 inch Coil Spring Lift Kit with SuperLift Shocks SL-| K876

4" Lift w/ High-Quality Engine-Specific Coil Springs

If you're looking for a dependable 4" lift without the premium price tag, SuperLift's 4" Suspension System with engine-specific coil springs and radius arm drops gets the job done at a very attractive price point. This kit is based around SuperLift's Superide Series gas shocks in the front and hydraulic shocks in the rear which come completely assembled and ready to bolt on to reduce installation time. This SuperLift 4" Lift Kit utilizes your factory radius arms and includes drop brackets to maintain proper caster angle and steering geometry. This performance-ready 4" lift also contains new, engine specific coil springs that work in conjunction with the included track bar relocation bracket and dropped pitman arm to ensure proper steering geometry and track bar phasing.

Rear Blocks and Longer U-Bolts

SuperLift's 4" Coil Spring Lift Kit features top-of-the-line components and an easy-to-install design that makes overhauling your stock suspension system for comfort and performance convenient and time-conscious. Along with new high-quality coil springs and Superide shocks, the kit includes a track bar relocation bracket, pitman arm, front sway bar correction, and front compression travel-stop relocation brackets to prevent suspension over-compression. The rear lift is achieved through larger rear blocks and longer u-bolts. SuperLift also includes all necessary hardware for installation so you can get to the trails as soon as possible. Complete with high-performance Superide shocks, this 4" lift lets you enjoy OE ride quality as well as a new commanding view of the road.

Fitment: 2011-2016 Super Duty 4WD 6.7L Powerstroke Diesel

Important Driveshaft Note: If your truck is equipped with a two-piece driveshaft you'll need a carrier bearing drop bracket to prevent driveline vibration. Choose "yes" from the drop-down menu if you have a two-piece driveshaft.

Important Fitment Note: This lift kit is packaged with rear blocks and u-bolts that are configured for Super Duty pickups with the factory 1-7/8" blocks WITHOUT top mount overloads. If your vehicle is equipped with the factory 3.71" block or top mounted overloads, a longer rear u-bolt will be required. Be sure to choose "yes" from the drop-down menu if you have the larger 3.71" rear block or top-mounted overload.

Warranty: SuperLift's 4" Coil Spring Lift Kit is backed by a Lifetime Warranty against manufacturer defect.

Wheel & Tire Fitment: This lift kit will allow you to install 35 x 12.5" tires on 8-9" wide wheels with up to 5.75" back spacing.