MBRP 3 inch Inlet 3-1/2 inch Outlet Black 304 Stainless Steel Exhaust Tip | T5115BLK

MBRP 3 inch Inlet 3.5 inch Outlet Black 304 Stainless Steel Exhaust Tip - MBRP 3 inch Inlet 3.5 inch Outlet Black 304 Stainless Steel Exhaust Tip
MBRP 3 inch Inlet 3.5 inch Outlet Black 304 Stainless Steel Exhaust Tip
SKU T5115BLK
22 Review(s)
$94.99
0 in stock Ships From Manufacturer. Average Time To Ship Is 5-7 Business Days
Free shipping included
Earn reward points with this purchase
Write a Review
Please hold for video...
Average Rating
2014 Ford F-150 FX4 Ecoboost
Wanted to clean up the unfinished look of the factory exhaust,the black tip did the job on the FX4's blacked out theme.Great fit and finish plus quality equals happy customer
Did you find this helpful?  8 of 8  Found Helpful
Reviewed by:  (Verified Buyer)  from West Chester on 10/2/2014
5
Average Rating
2019 Ford Ranger XLT 4 door.
No problem with install. Have had lots of compliments on how the item looks and where did I buy it. Have recommended Stage3 to a lot of my friends. Thank you.
Did you find this helpful?  8 of 8  Found Helpful
Reviewed by:  from Jonesboro, AR on 6/26/2020
5
Average Rating
2014 Ford F150 stx sport 5.0 V-8 4x4
Nice fit to the stock tailpipe, no modification's to apply
Did you find this helpful?  7 of 7  Found Helpful
Reviewed by:  from NJ on 9/23/2015
5
Average Rating
2016 F150 2.7L Ecoboost
Easy bolt on installation on 2016 F150 with 2.7L Ecoboost engine.
Did you find this helpful?  6 of 6  Found Helpful
Reviewed by:  (Verified Buyer)  from Dallas, TX on 4/30/2016
5
Average Rating
2018 Ford f150 FX4 2.7l Ecoboost
Took about 10 min to change the exhaust tip. Looks great and fit is perfect. No altering, remove the old one, slip on new one and tighten.
Did you find this helpful?  4 of 5  Found Helpful
Reviewed by:  from PA on 3/12/2018
5
Average Rating
Ford Ranger 2019
Easy to install and looks great.
Did you find this helpful?  4 of 5  Found Helpful
Reviewed by:  from Texas on 5/8/2020
5
Average Rating
2014, Ford, F150 FX 4 Ecoboost
Can not figure out why Ford puts a chrome tip on a blacked out truck. Found this wed site looked up tips. Ordered the tip and in about 10min had the old one off and the black one on. Its that simple. Always remember you get what you pay for. 100% satisfied!!
Did you find this helpful?  3 of 3  Found Helpful
Reviewed by:  (Verified Buyer)  from Belhaven, NC on 4/9/2015
5
Average Rating
2016 ford f 150
easy to install and looks great.Heavy gauge steel.
Did you find this helpful?  3 of 4  Found Helpful
Reviewed by:  from summerdale pa. on 6/18/2016
5
Average Rating
2014 Ford F150 FX4
I received the exhaust tip in less than 48 hours of ordering! It fits perfectly on my 3 factory tail pipe on my F150 FX4 and instillation was extremely easy.
Did you find this helpful?  3 of 4  Found Helpful
Reviewed by:  from Altoona, PA on 9/27/2016
5
Average Rating
2013 FX4
This seems to be a quality tip. Fit and finish is very good. Mounting bolt is sturdy. Time will tell how it holds up.
Did you find this helpful?  1 of 1  Found Helpful
Reviewed by:  from Iowa on 5/1/2015
5
Average Rating
2013 F-150 FX4
Tip looked great when I first installed it on the truck, but after 5 months all the finish has come off the tip. For what I paid I thought that the finish would have handled the elements a little bit better. Besides the finish coming off the tip, it sounds great.
Did you find this helpful?  1 of 1  Found Helpful
Reviewed by:  from Michigan on 3/18/2017
4
Average Rating
2014 F150 FX4
Fits perfectly on 3 outlet and provides the final touch on stock exhaust pipe. Fits the color of the truck perfectly.
Did you find this helpful? 
Reviewed by:  from Texas on 12/15/2017
5
Average Rating
2018 F150
Exhaust tip worked perfect. In the process of blacking out my truck and the stock tail pipe just doesn't look right so this was an easy install. Just slide over the existing tail pipe, tighten and it's done!!
Did you find this helpful? 
Reviewed by:  from Texas on 6/15/2018
5
Average Rating
F150
Great Fit and Bad ass Looks MBRP does it again Stage 3 Rocks it again (Thanks Guys)
Did you find this helpful? 
Reviewed by:  from Boise on 7/9/2019
5
Average Rating
2020 ford ranger
Shipping fast, product is great
Did you find this helpful? 
Reviewed by:  from San Jose on 11/1/2020
5
Average Rating
2016 F150 Supercrew.
Easy install! Looks great and great quality.
Did you find this helpful? 
Reviewed by:  from SLC, Utah on 1/8/2021
5
Average Rating
2021 Ford Ranger
As advertised. I recommended. Excellent customer service response time.
Did you find this helpful? 
Reviewed by:  from Aguas Buenas on 8/20/2021
4
Average Rating
2020 F150
Like the product, the picture is a bit off, there is no writing the side it is on the top towards the end of the tip. The reason for 2 stars is simply the hex bolt. Supposedly it is 8mm. maybe BEFORE they paint the dang thing. You basically have to scrap away paint inside the bolt head to get your allen key to fit. Huge pain in the but and what should be a 2 minute install has turned into 45+ minutes. Hey MBRP dont coat the inside of the bolt with paint. Good grief.
Did you find this helpful? 
Reviewed by:  (Verified Buyer)  from COLUMBIA on 9/23/2021
2
Average Rating
2021 Ford F-150 Lariat Powerboost 4x4
Really like the look and finish of the exhaust tip, but it doesn't fit the exhaust of a 2021 Ford F-150 Powerboost (Lariat trim). Not sure if this applies to all 2021 F-150s or just the Powerboost engine. I knew the tailpipe outer diameter was a tad over 3" (on mine it's 3 1/8"), but I thought that this product would take that into consideration. The inlet diameter on this product is basically the same size as my tailpipe. Taking a star off of rating for having to return.
Did you find this helpful? 
Reviewed by:  from MO on 12/6/2021
4
Average Rating
2013 F-150 FX4
Awesome exhaust tip! I was sick of the unfinished look my exhaust had with just the plain-jane 3 tip sticking out behind the rear tire. Now with this tip it finally looks like a completed exhaust system and goes perfectly with my black FX4 trim package. It's heavier than I expected which leads me to believe it is a quality product that will last a while!
Did you find this helpful? 
Reviewed by:  (Verified Buyer)  from Utah on 11/6/2015
5
Average Rating
2014 F-150 STX
Install time: Quick & Easy Installed onto factory exhaust on 2014 F-150 (3 factory exhaust pipe) I cut back my factory exhaust, and adjusted the tip to rest just under the side of the truck. I think cutting back factory pipe, also allowed this 3 1/2 tip to add tone/resonance, and it sounds better now. Glad I bought it.
Did you find this helpful? 
Reviewed by:  from Illinois on 2/17/2017
5
Average Rating
2014, Ford, F150 STX
This looks great and fit easily on my unfinished 3 stock exhaust. A must have if your Blacking Out your truck.
Did you find this helpful? 
Reviewed by:  from New Jersey on 5/31/2016
5
Load More

Customer Question Will this fit a 2022 5.0 F150 with stock OEM exhaust. I have STX with no additional tip on it currently and it measures 3 1/8" OD. If this does not fit what matte black tip will fit?

Asked by: Michael - 3/14/2024
Customer Answer The inside diameter of this tip is 3", so you would have to expand it to fit over tubing that is 3 1/8" diameter.
Was this answer helpful?  0 of 0  Found Helpful.
Answer provided by: Joel Galaz (3/15/2024)

Customer Question ordered and received the MBRP black exhaust tip T5115BLK love it, but haven't put it on yet. question I didn't read all of the specs till after I received and now see that it is for cat back exhausts only? I'm trying to verify that my stock exhaust system on my 2020 Ranger FX4 is a cat back or not. Sorry but I'm a 70 year old woman with no clue about exhausts. Can you advise or should I ask my dealer if it is safe to put on?

Asked by: Ginny Hankinson - 7/27/2021
Customer Answer Your Ranger is equipped with a cat-back system. All "cat-back" means is exhaust system components that installed after the catalytic converters. In your case, your truck is equipped with a stock cat-back. From our understanding all of the USDM Ford Rangers came equipped with a 3" diameter tailpipe, and this tip should fit without issues. Just make sure to install it nice and tight, and it's a good idea to retighten after the exhaust system heats up.
Was this answer helpful?  0 of 0  Found Helpful.
Answer provided by: Jason@Stage3 (7/28/2021)

Customer Question Does this exhaust tip, the MBRP 3" Inlet 3-1/2 " Outlet Black 304 Stainless Steel Exhaust Tip T5115BLK fit on the 2020 Ford Ranger XLT?

Asked by: frank - 2/25/2021
Customer Answer As long as you have a 3" diameter exhaust outlet, this tip will fit. It's our understanding that all of the 2019-2021 Rangers with a 2.3L EcoBoost use a 3" tailpipe outlet, though we aren't sure on the overseas Rangers. If you're not certain, you can always take a tape measure to your truck's tailpipe outlet.
Was this answer helpful?  0 of 0  Found Helpful.
Answer provided by: Jason@Stage3 (2/26/2021)

Customer Question What size hex wrench do I need to tighten the Hex bolt? The standard set didn't work nor did the metric set. I tried two different sets even.

Asked by: Jeff from Denver - 9/21/2020
Customer Answer According to MBRP, the tightening screw is an 8mm allen head.
Was this answer helpful?  0 of 0  Found Helpful.
Answer provided by: Jason@Stage3 (9/22/2020)

Customer Question I have a 2018 Silverado Z71 with a tailpipe diameter of 2 3/4 ". Will this exhaust tip be the perfect fit?

Asked by: Richard - 12/31/2018
Customer Answer This top will only fit tailpipes with an outside diameter of 3". If your tailpipe has an outside diameter of 2.75", then this tip will likely be too loose unless you have it welded.
Was this answer helpful?  0 of 0  Found Helpful.
Answer provided by: Jason@Stage3 (1/3/2019)

Customer Question Will this work on a 2016 f150 with the 2.7L ecoboost?

Asked by: Jae - 3/27/2016
Customer Answer The tip will fit any 3" diameter exhaust outlet. Your best bet would be to measure your exhaust outlet to verify it's the correct diameter for this tip.
Was this answer helpful?  0 of 1  Found Helpful.
Answer provided by: Jason@Stage3 (3/29/2016)

Customer Question Will this item fit, 2014 F-150STX, 3" tail pipe with 5.0 engine ?

Asked by: Gary - 6/20/2015
Customer Answer Yep. This is a generic tip with a 3" inlet. It'll fit the stock tailpipe exit, assuming that it's 3" in diameter.
Was this answer helpful?  0 of 0  Found Helpful.
Answer provided by: Jason@Stage3 (6/24/2015)

Customer Question I have a 13 stx, will the tip fit over the factory exhaust to provide a nice finish?

Asked by: joe - 4/19/2015
Customer Answer You'd have to double-check and make sure you have a 3" diameter outlet for your tailpipe, though I do believe this tip will work with the stock exhausts on most F150 submodels.
Was this answer helpful?  3 of 3  Found Helpful.
Answer provided by: Jason@Stage3 (4/20/2015)

Customer Question is there a black tip offered for the mbrp rear side exit with the 2.5 inlet?

Asked by: jeremy - 12/19/2014
Customer Answer The 2.5" version of this tip is located here.
Was this answer helpful?  0 of 0  Found Helpful.
Answer provided by: Jason@Stage3 (12/19/2014)
Load More
Earn reward points
on this product

Stage 3 Rewards is our free customer loyalty program. Earn points on every order and redeem for cash off your next purchase.

  • 100 bonus points just for signing up ($2 to start)
  • 1 point per dollar spent on every order (2% back)
  • Bonus points for reviews, birthdays, and social shares
  • Redeem for $10, $20, $30, $50, or $100 off coupons
See full program details

WARNING: Cancer and Reproductive Harm

This product can expose you to chemicals including those known to the State of California to cause cancer and birth defects or other reproductive harm.

For more information, visit [www.p65warnings.ca.gov](https://www.p65warnings.ca.gov).

Pick Up Where You Left Off

Logo