2019-2023 Ford Ranger 2.3L EcoBoost aFe Power Quantum Pro 5R Cold Air Intake | 53-10021R

Name: 2019-2023 Ranger 2.3L EcoBoost aFe Power Quantum Pro 5R Cold Air Intake
Brand: AFE Power
SKU: 53-10021R
Price: 365.00 USD
Availability: InStock

2019-2023 Ranger 2.3L EcoBoost aFe Power Quantum Pro 5R Cold Air Intake

SKU 53-10021R

5 Review(s)

$365.00

0 in stock Ships From Manufacturer. Average Time To Ship Is 5-7 Business Days

Free shipping included

60-day returns on most items

Earn reward points with this purchase

6 Customer Q&A(s)

Write a Review

Highlights:

Features silicone intake tubing
Adds up to +9 Horsepower and +9 lb-ft. of Torque
Has measured flow of 300 CFM @ 7" H2O
Outflows Factory Intake by 22%
Quick and Easy Install

Innovative, Highly Efficient 2.3L Ecoboost Intake

The 2019-2023 Ford Ranger's 2.3L Ecoboost engine has been impressive addition to their new midsize truck, but if you're like us, then you will want to get the most power and efficiency out of your engine. Afe Power takes pride in its quality Quantum Pro 5R Cold Air Intake as one of their most innovative, efficient designs yet. Beyond the high-flow Quantum Pro 5R air filter, this highly advanced intake system uses flexible silicon intake tubing and a special integrated filter-to-housing design for positive surface area seal and easy installation.

Quantum Pro 5R Oiled Cotton Air Filter

Every component in aFe Power's Quantum Pro 5R Cold Air Intake uses a 5" flange and a pre-oiled, five-layered cotton gauzed Pro 5R media for the best Ranger experience. It is designed to increase the flow of cold air through your intake and into your engine. This intake offers a measured flow of 300 CFM at 7" H2O. As a a matter of fact, you will get 22% increase of flow over a factory intake. The intake also adds up to +9 Horsepower and +9 lb-ft. of Torque. This makes your truck have the best possible street use. The filter additionally features an injection molded base and top to offer durability but at a light weight. The filter's base provides even more air flow with a three-angle velocity stack that effectively uses four captive screws to attach to the housing. At the other end, the filter's top possesses more surface area due to its inverted design; this extends the lifespan of your filter before maintenance is needed.

Reinforced Silicone Intake Tube

In order to stand the test of wear and tear, this cold air intake uses a tough silicone intake tube. The tube is reinforced with three layers of nylon material to ensure its durability. The tube additionally features two port holes for a vacuum port fitting from your stock intake and another for an air temperature adapter.

Fitment: 2019-2023 Ford Ranger 2.3L Ecoboost.

Write a Review

2019 Ford Ranger

Excellent Fit, Excellent Installation Instructions, Excellent Quality. If you are looking for performance gains without the additional noise this is the intake for you, if you want something that makes noise, you might want to look at another intake kit.

Did you find this helpful? 12 of 12 Found Helpful

Reviewed by: (Verified Buyer) Robert Draheim from MD on 3/26/2020

2019 | 2020 Ford Ranger XLT

I was able to got hold one directly from Manufacture.Its looks nice under the hood fits perfectly. But I am wondering about the performance wise ! I was unable find any difference between stock one.

2019-2023 Ranger 2.3L EcoBoost aFe Power Quantum Pro 5R Cold Air Intake Review Image!

Did you find this helpful? 9 of 14 Found Helpful

Reviewed by: Tirthankar chatterjee from California on 2/1/2020

Ford Ranger 2020

So easy to install great instructions format

Did you find this helpful? 6 of 6 Found Helpful

Reviewed by: Miguel Delgado from Boerne on 7/17/2020

2020 Ford Ranger FX4

Great quality components and easy install. I added the larger air scoop and the engine does seem to breathe better. I do wish they had designed it with easier access to the filter so I wouldn't have to disassemble the unit to service the filter. I kinda wish I had gone with the aFe Rapid Induction Intake with the more open-air system. Consider your needs if/when deciding between the two products.

Did you find this helpful? 4 of 4 Found Helpful

Reviewed by: (Verified Buyer) Philip Whitford from Phoenix, AZ on 3/4/2021

2021 Ranger XLT

Excellent fit and finsh. Picture misleading as it looks like the intake tube is a molded piece but it is rubber. Would be nice if they include holes for the wire grommets to go back into like the factory box.

Did you find this helpful? 1 of 1 Found Helpful

Reviewed by: Gram Pitzer from DELAWARE on 9/5/2021

Can I make this intake work with an ARB snorkel?

Asked by: Allen P - 10/2/2021

We can't guarantee it. Due to the design changes in the aFe intake, the ARB intake brackets may not work.

Was this answer helpful? 0 of 0 Found Helpful.

Answer provided by: Jason@Stage3 (10/5/2021)

Submit an answer

Is it necessary to disassemble the unit to check and change the filter? Most you can access from the top but this looks like it's totally sealed.

Asked by: P double U - 11/26/2020

The airbox included with this kit is all one unit, so you will need to disassemble and remove the airbox to get at the filter.

Was this answer helpful? 0 of 0 Found Helpful.

Answer provided by: Jason@Stage3 (11/27/2020)

Submit an answer

Is it CARB legal?

Asked by: Jeremy - 11/29/2019

Unfortunately, this kit is not yet CARB approved, though we're hoping aFe gets CARB approval here in the near future.

Was this answer helpful? 1 of 1 Found Helpful.

Answer provided by: Jason@Stage3 (12/2/2019)

Submit an answer

When will this be available

Asked by: Mark - 10/28/2019

For our latest stocking information and availability, please call us directly at 623-434-5277.

Was this answer helpful? 2 of 2 Found Helpful.

Answer provided by: Jason@Stage3 (10/29/2019)

Submit an answer

How are these dyno graphs being attained? I can't see if the stock tune was used according to the notes on the page and find it hard to believe there would be such a change to the curve without a fuel map change.

Asked by: antoncheez - 10/14/2019

You'd have to talk to aFe on that one. We did not perform dyno testing on this intake, nor do we plan to.

Was this answer helpful? 4 of 5 Found Helpful.

Answer provided by: Jason@Stage3 (10/16/2019)

Submit an answer

Does this make the truck have a loud "whooshing" sound?

Asked by: Vino - 9/15/2019

We haven't tested this intake yet, but in theory, it shouldn't. Intakes with fully-enclosed air boxes like this tend to stay fairly quiet. It'll likely still be a smidge louder than stock, but not by much.

Was this answer helpful? 5 of 5 Found Helpful.

Answer provided by: Jason@Stage3 (9/17/2019)

Submit an answer

Have Questions?

Stage 3 Rewards is our free customer loyalty program. Earn points on every order and redeem for cash off your next purchase.

100 bonus points just for signing up ($2 to start)
1 point per dollar spent on every order (2% back)
Bonus points for reviews, birthdays, and social shares
Redeem for $10, $20, $30, $50, or $100 off coupons

See full program details

WARNING: Cancer and Reproductive Harm

This product can expose you to chemicals including those known to the State of California to cause cancer and birth defects or other reproductive harm.

For more information, visit [www.p65warnings.ca.gov](https://www.p65warnings.ca.gov).

2019-2023 Ford Ranger 2.3L EcoBoost aFe Power Quantum Pro 5R Cold Air Intake | 53-10021R

Innovative, Highly Efficient 2.3L Ecoboost Intake

Quantum Pro 5R Oiled Cotton Air Filter

Reinforced Silicone Intake Tube

Can I make this intake work with an ARB snorkel?

Is it necessary to disassemble the unit to check and change the filter? Most you can access from the top but this looks like it's totally sealed.

Is it CARB legal?

When will this be available

How are these dyno graphs being attained? I can't see if the stock tune was used according to the notes on the page and find it hard to believe there would be such a change to the curve without a fuel map change.

Does this make the truck have a loud "whooshing" sound?

Pick Up Where You Left Off