2014 Ford F150 4WD Zone Offroad 6 inch Lift Kit | F40

Awesome Lift System Specifically for the 2014 F150s

Zone, just everyone else who's serious about F150 lift kits, had to go back to the drawing board for the 2014 F150 models. Luckily, they worked extremely hard and have a 6" lift kit ready and waiting for the new 2014 F150s. This kit specifically addresses the revised front suspension setup of the 2014s all while giving your truck an awesome look and the ability to fit on some truly huge wheel and tire combinations. Zone's 6" 2014 F150 lift kit is an excellent choice for trucks that need a big lift on a small budget while still getting everything that they need for a successful and clean installation. The kit combines a crossmember/knuckle lift up front with rear block and u-bolt kit in the back for an awesome appearance and performance with minimal effort.

Strong Crossmembers with Skid Plate

The kit comes standard with front and rear lifted crossmembers that bring the front suspension's ride height up. To compensate for the new height, Zone throws in a pair of CNC machined lifted steering knuckles that were carefully designed for low levels of noise, vibration, and harshness during street driving. The knuckles correct your 2014 F150's upper control arm angles and work in conjunction with the differential drop bracket to correct your CV angles. This revised kit comes with a pair of front shock mount spacers that allow you to reuse your factory front shocks and coil springs without any modifications. The crossmembers are bridged with a differential skid plate that provides protection and extra rigidity for the Zone kit.

5" Rear Block with U-Bolts and Rear Shocks

The rear of your 2014 F150 is lifted by a large rear block held in place by high-quality U-bolts. The blocks are made out of strong cast iron with an E-coat finish and install right in place of your F150's factory blocks as direct drop-in replacements. Zone includes a set of standard rear shocks which are taller than stock, but offers a pair of their Nitro® rear shocks with or without your choice of boot as a free upgrade. The Nitro® shocks feature a twin-tube design with 10-stage velocity-sensitive valving that provides them with excellent performance both on and off the road. Zone also provides all necessary installation hardware and instructions with each of their 2014 F150 6" Lift Kits.

FMVSS No. 126 Compliant and Backed by Zone's Factory Protection Plus Plan

Zone's Lift Kit meets the stringent standards set by the NHTSA's FMVSS No. 126 test, which means that Zone's 6" lift won't effect your truck's factory traction control in the event of a potential rollover situation. Moreover, the kit come backed by Zone's Limited Lifetime Warranty and a 6-year/50,000 mile limited drivetrain warranty so that you can install and run this awesome Zone lift system without needing to worry about the kit itself or your F150's drivetrain.

For a limited time, Stage 3 is offering the Nitro Series Shock Upgrade at NO CHARGE! No strings attached. Just add them using the drop-down menu above.

Specifications:
Front Lift:	6" Knuckle
Rear Lift:	5" Block
Backspacing:	5.5"
Install Time:	~8 hrs.

Wheel and Tire Fitment:

Wheel Size: 18x9" Backspacing: 5" Max Tire Size: 37x12.50"	Wheel Size: 18x9" Backspacing: 5" to 5.5" Max Tire Size: 35x12.50"	Wheel Size: 20x9" Backspacing: 5" to 5.5" Max Tire Size: 37x12.50"

Important Notes:

• All-Wheel-Drive (AWD)models will require modification of the front driveshaft.
• Will not work with 17" wheels.
• Vehicles equipped with factory powersteps will require the Zone Offroad E-Brake Relocation Bracket. Please select this option from the drop-down menu above.
• The optional Carrier Bearing Drop Bracket is required for F150s that have a two-piece drivershaft.

Wheel fitment and kit notes: this kit requires cutting your truck's subframe for proper fitment and will not fit factory 18" or 17" wheels. This kit REQUIRES at least an 18x9" wheel with a maximum of 5" to 5.50" of backspace. All 18x9" wheels should be test-fit prior to installation, due to design variations that can cause fitment issues. Stock 20" Platinum and FX4 wheels can be used with 305/60R20 tires. For all other fitment questions, please contact Stage 3 directly at 623-434-5277.