2009-2014 Ford F150 Timbren 8,600lb Rear Suspension Enhancement System | FR1504D

Name: 2009-2014 F150 4WD Timbren 8600lb Rear SES System
Brand: Timbren
SKU: FR1504D
Price: 269.36 USD
Availability: InStock

2009-2014 F150 4WD Timbren 8600lb Rear SES System

SKU FR1504D

0 Review(s)

$269.36

4 in stock Ships in 1 Business Day

Free shipping included

60-day returns on most items

Earn reward points with this purchase

4 Customer Q&A(s)

Write a Review

Highlights:

Helps keep your F150 level when towing or loaded
Pair of unique rubber springs
Handles up to 8,600lbs of load
Easily installs onto your 4WD F150
Comes with hardware and instructions
Backed by a limited lifetime warranty

Drop-In System that Helps Level out up to 8,600lbs of Load

Preventing sag in your F150's rear end when your bed is loaded down can be a pain, especially if your truck is already leveled up front to squeeze on bigger tires. If you want avoid having to go with an expensive air spring system, then you should check out the Timbren Suspension Enhancement System (SES). The SES consists of a pair of high-strength extended Aeon® bump stop rubber springs that install between your 2009-2014 F150's frame and rear axle and provide you with up to 8,600lbs of load leveling to prevent rear sag and improve your F150's loaded handling and stability. The SES is extremely easy to install, with the Aeon springs dropping into place of your F150's factory bump stop and the lower bracket bolting around your F150's axle with included U-bolts.

Specialized Rubber Springs with Heavy-Duty Steel Mounting Plate

The Timbren 8,600lb Suspension Enhancement System is built around a pair of Timbren's Aeon® rubber springs and come with all the hardware you need to get them installed on your truck. The Aeon® springs are made out of specialized rubber compound that actually gives them a progressive spring rate which helps them keep your loaded ride leveled without overly compromising your F150's ride quality. The rubber material is nearly indestructible and resistant to corrosion and wear. The lower brackets included in each kit are made out of laser-cut steel that's then topped off with a powder coat finish to prevent corrosion. Each SES kit comes with installation hardware and instructions. Timbren even backs the system with a limited lifetime warranty.

Fitment: 2009, 2010, 2011, 2012, 2013, 2014 F150 4WD

Fitment Notes: this kit will not fit 2010, 2011, 2012, 2013, 2014 Raptors or RWD/2WD F150s. A version of this kit for RWD F150s is also available. A version for 2010, 2011, 2012, 2013, 2014 Raptors is here.

Write a Review

Will these work on 6" rear lift blocks with an incorporated bump stop arm?

Asked by: Don - 3/28/2021

This kit will fit and will probably work fine with on a lift kit with blocks that have bump stop arms. That being said, a lot will depend on the block and whether that bump stop arm is in the same relative location as the axle would be at the lifted height.

Was this answer helpful? 0 of 0 Found Helpful.

Answer provided by: Jason@Stage3 (3/29/2021)

Submit an answer

Why doesn’t this kit work on a 2wd, since they have the same rear axle?

Asked by: Patrick - 3/14/2021

The RWD 2009-2014 F150s actually don't always have the same axle. Many had the standard 8.8" instead of the 9.75". More importantly, the RWD trucks did not come with a rear block, while the 4WD trucks came with either a 1.25" or 1.50" rear block, which could cause issues with rear travel with the Timbren kit. You would likely be good to go if you installed either a 1.5" rear block or a take-off 4WD block.

Was this answer helpful? 1 of 1 Found Helpful.

Answer provided by: Jason@Stage3 (3/15/2021)

Submit an answer

Do these work with a 4" lift?

Asked by: Garvin - 11/27/2019

They'll technically bolt up on a truck with a 4" lift kit, though the spring is not long enough to actually work as it's intended on a truck with a typical 4" block or 2" stacked block on a 4" lift kit.

Was this answer helpful? 0 of 0 Found Helpful.

Answer provided by: Jason@Stage3 (11/29/2019)

Submit an answer

Can I have these on with the Roadmaster Active Suspension

Asked by: Ct - 6/3/2019

He haven't tried it, and we can't strictly guarantee that the combination will install without interference. The real issue is that the RoadMaster's inner bracket may come into contact with the Timbren Spring when its compressed, and we're not quite sure how much clearance there actually is.

Was this answer helpful? 0 of 0 Found Helpful.

Answer provided by: Jason@Stage3 (6/4/2019)

Submit an answer

Have Questions?

Stage 3 Rewards is our free customer loyalty program. Earn points on every order and redeem for cash off your next purchase.

100 bonus points just for signing up ($2 to start)
1 point per dollar spent on every order (2% back)
Bonus points for reviews, birthdays, and social shares
Redeem for $10, $20, $30, $50, or $100 off coupons

See full program details

WARNING: Cancer and Reproductive Harm

This product can expose you to chemicals including those known to the State of California to cause cancer and birth defects or other reproductive harm.

For more information, visit [www.p65warnings.ca.gov](https://www.p65warnings.ca.gov).

2009-2014 Ford F150 Timbren 8,600lb Rear Suspension Enhancement System | FR1504D

Drop-In System that Helps Level out up to 8,600lbs of Load

Specialized Rubber Springs with Heavy-Duty Steel Mounting Plate

Will these work on 6" rear lift blocks with an incorporated bump stop arm?

Why doesn’t this kit work on a 2wd, since they have the same rear axle?

Do these work with a 4" lift?

Can I have these on with the Roadmaster Active Suspension

Pick Up Where You Left Off